Jan-Philipp Koester

Jan-Philipp Koester

Auto-generated profile, based on publicly available information

Jan-Philipp Koester

Ferdinand-Braun-Institut (FBH)

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 January 2019 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
AZAnissa Zeghuzi
Anissa Zeghuzi
MRMindaugas Radziunas
Mindaugas Radziunas
HWHans-Jurgen Wunsche
Hans-Jurgen Wunsche
JKJan-Philipp Koester
Jan-Philipp Koester
HWHans Wenzel
Hans Wenzel
AKAndrea Knigge
Andrea Knigge
With rising current, the lateral far-field angle of high-power broad-area lasers widens (far-field blooming), which can be partly attributed to non-thermal effects due to carrier-induced refractive index and gain changes that become the dominant mechanism under pulsed operation. To analyze the non-thermal contribution to far-field blooming, we use a traveling wave-based model that properly describes the injection of the current into and the diffusion of the carriers within the active region. Although no pre-assumptions regarding the modal composition of the field is made and filamentation is automatically accounted for, the highly dynamic time-dependent optical field distribution can be very well represented by only a few modes of the corresponding stationary waveguide equation obtained by a temporal average of the carrier density and field intensity. The reduction of current spreading and spatial holeburning by selecting proper design parameters can substantially improve the beam quality of the laser.

27 May 2021 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Closed access
JKJan-Philipp Koester
Jan-Philipp Koester
HWHans Wenzel
Hans Wenzel
JFJörg Fricke
Jörg Fricke
OBOlaf Brox
Olaf Brox
AZAnissa Zeghuzi
Anissa Zeghuzi
GTGünther Tränkle
Günther Tränkle
We present AlGaAs-based monolithically integrated dual-wavelength lasers and master-oscillator power-amplifiers emitting around 785 nm which combine a near diffraction limited beam quality with single longitudinal mode emission, both achieved over a wide range of output powers. This holds for alternating dual wavelength operation which is of interest for applications in spectroscopy as well as for simultaneous dual wavelength operation which can be used to generate THz-radiation. Compared to previous designs the lateral optical confinement is provided by two differently deep etched ridge waveguides. Shallow etching is used in lasing and amplifying sections to ensure single-lateral mode operation, whereas deep etching is employed to form more compact S-bends and to enable the use of multi-mode interference (MMI) couplers instead of Y-couplers.

23 November 2020 in Semiconductor Science and Technology
Verified
Journal Article
Open access
PDF file
JKJan-Philipp Koester
Jan-Philipp Koester
APAlexander Putz
Alexander Putz
HWHans Wenzel
Hans Wenzel
HWH-J Wünsche
H-J Wünsche
MRMindaugas Radziunas
Mindaugas Radziunas
HWHans Juergen Wuensche
Hans Juergen Wuensche
The lateral brightness achievable with high-power GaAs-based laser diodes having long and broad waveguides is commonly regarded to be limited by the onset of higher-order lateral modes. For the study of the lateral-mode competition two complementary simulation tools are applied, representing different classes of approximations. The first tool bases on a completely incoherent superposition of mode intensities and disregards longitudinal effects like spatial hole burning, whereas the second tool relies on a simplified carrier transport and current flow. Both tools yield agreeing power-current characteristics that fit the data measured for 5–23 µm wide ridges. Also, a similarly good qualitative conformance of the near and far fields is found. However, the threshold of individual modes, the partition of power between them at a given current, and details of the near and far fields show differences. These differences are the consequence of a high sensitivity of the mode competition to details of the models and of the device structure. Nevertheless, it can be concluded concordantly that the brightness rises with increasing ridge width irrespective of the onset of more and more lateral modes. The lateral brightness 2   W   mm − 1 mrad − 1 at 10 MW cm−2 power density on the front facet of the investigated laser with widest ridge (23 µm) is comparable with best values known from much wider broad-area lasers. In addition, we show that one of the simulation tools is able to predict beam steering and coherent beam coupling without introducing any phenomenological coupling coefficient or asymmetries.

1 October 2024 in APL Photonics
Verified
Journal Article
Open access
PDF file
JKJan-Philipp Koester
Jan-Philipp Koester
HWHans Wenzel
Hans Wenzel
JFJörg Fricke
Jörg Fricke
MRMatthias Reggentin
Matthias Reggentin
PCPietro Della Casa
Pietro Della Casa
AKAndrea Knigge
Andrea Knigge
This paper reports on a monolithically integrated gallium arsenide (GaAs)-based photonic integrated circuit platform for wavelengths around 1064 nm. Enabled by spatially selective quantum well removal and two-step epitaxial growth, it supports on-chip gain as well as passive waveguides. In addition, shallow- and deep-etched waveguides are realized. The former result in waveguide losses of less than 2 dB/cm, while the latter enable compact integrated waveguide components. To demonstrate the performance of the platform, racetrack ring resonators based on deep-etched Euler bends and shallow-etched directional couplers are realized, achieving high intrinsic quality factors of 2.6 × 105 and 3.2 × 105 for the fundamental TE and TM mode, respectively. To demonstrate the use of these resonators, ring-resonator-coupled lasers are fabricated, resulting in one-sided output powers of up to 14 mW and single-mode operation with 40 dB side-mode suppression. The successful integration of ring resonators on a GaAs-based active/passive photonic integrated circuit platform paves the way for the realization of fully monolithic, widely tunable, and narrow linewidth ring-resonator-coupled laser sources.

1 February 2023 in Optical and Quantum Electronics
Verified
Journal Article
Open access
PDF file
JKJan-Philipp Koester
Jan-Philipp Koester
HWHans Wenzel
Hans Wenzel
MWMartin Wilkens
Martin Wilkens
AKAndrea Knigge
Andrea Knigge
In this work, a simulation-based analysis of a CW-driven tapered ridge-waveguide laser design is presented. Measurements of these devices delivered high lateral brightness values of $${4}{\hbox {W}\cdot \hbox {mm}^{-1} \hbox {mrad}^{-1}}$$ 4 W · mm - 1 mrad - 1 at $${2.5}\,\hbox {W}$$ 2.5 W optical output power. First, active laser simulations are performed to reproduce these results. Next, the resulting complex valued intra-cavity refractive index distributions are the basis for a modal and beam propagation analysis, which demonstrates the working principle and limitation of the underlying lateral mode filter effect. Finally, the gained understanding is the foundation for further design improvements leading to lateral brightness values of up to $${10}{\hbox {W}\cdot \hbox {mm}^{-1} \hbox {mrad}^{-1}}$$ 10 W · mm - 1 mrad - 1 predicted by simulations.

24 December 2020 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
AZAnissa Zeghuzi
Anissa Zeghuzi
HCHeike Christopher
Heike Christopher
AKAndreas Klehr
Andreas Klehr
JKJan-Philipp Koester
Jan-Philipp Koester
HWHans Wenzel
Hans Wenzel
AKAndrea Knigge
Andrea Knigge
Carrier-induced anti-guiding effects emerging at extremely high injection current densities under short-pulse operation necessitate lateral-waveguide design considerations, that differ from those required when continuous-wave operation is desired. Here, we investigate variations of the lateral index-guiding trench design to achieve an excellent brightness value of 27.4 Wmm −1 mrad −1 from tapered-ridge-waveguide lasers with more than 18 W output power under 3.3 ns long pulse operation.