A multi-laboratory collaborative effort is currently exploring the feasibility of laser direct drive liquid deuterium–tritium (DT) wetted foam inertial confinement fusion concepts being considered for novel neutron sources on the National Ignition Facility (NIF) laser. In contrast to the laser indirect drive approach that recently demonstrated ignition in the laboratory, these concepts also offer the potential of multi-MJ yields but with less damaging laser drives, improved robustness to target and drive imperfections, and enhanced facility fielding flexibility and orders-of-magnitude less target debris: favorable aspects for neutron exposure environments and inertial fusion energy concepts, alike. We present the current status of the experimental platform and radiation-hydrodynamics modeling development efforts to better understand the potential risks and benefits associated with these designs for the envisioned implementation on the NIF laser encompassing (i) novel two-photon-polymerization additively manufactured capsules, (ii) cryogenic target cooling through a large conductive fill tube, (iii) polar direct drive, and (iv) direct laser ablation of the liquid DT wetted foam layer.
We have developed the Sample Test Array and Recovery (STAR) platform for the National Ignition Facility (NIF) for studying the thermal and hydrodynamic responses of materials in extreme environments. The STAR platform expands the range of obtainable fluences and quadruples the rate that materials experiments can be conducted at the NIF. Example configurations are demonstrated for fluences spanning 0.56–34 J/cm2 with environmental isolation for post-shot material recovery and inspection and up to 1740 J/cm2 without isolation, with surface heating rates of up to 2 × 1014 K/s. An example experiment involving thermally driven shock and spallation of aluminum alloy 7075 is briefly discussed.
Thermomechanical shock experiments on the National Ignition Facility (NIF) aim to study high strain rate dynamic material response. In such experiments, the NIF laser is used to generate high fluence x-ray emission sources, which irradiate material samples of interest. Under sufficiently high x-ray energy deposition, thermomechanical impulses are generated in the materials. While it is known that the characteristics of x-ray generated impulses vary as a function of incident x-ray spectra, it remains unclear how spectral assumptions and uncertainties in NIF spectral reconstructions affect our interpretation of impulsive loading. In this paper, we simulate the response of a standard titanium alloy baseline sample to synthetic analytically derived and measured NIF xenon line-emission x-ray sources with a radiation hydrodynamics code. We vary the source spectral characteristics based on different source reconstruction techniques to understand the resulting variation in baseline sample response and compare the simulated response with experimental results. We find that the response is highly sensitive to assumptions made about the spectral contents and that knowledge of spectral uncertainties bounds our understanding of the resulting material response. The results of this effort help to extend our ability to use baseline material samples to extract quantitative properties from x-ray experiments on the NIF.