Bhawna Tiwari

Bhawna Tiwari

Auto-generated profile, based on publicly available information

Bhawna Tiwari

Department of Electrical Engineering and Computer Science, IISER Bhopal, Bhopal, India

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2020 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
PBPydi Bahubalindruni
Pydi Bahubalindruni
BTBhawna Tiwari
Bhawna Tiwari
MPMaria Pereira
Maria Pereira
ASAna Santa
Ana Santa
Jorge MartinsJorge Martins
Jorge Martins
Pedro BarquinhaPedro Barquinha
Pedro Barquinha
This paper reports on-chip rail-to-rail timing signals generation thin-film circuits for the first time. These circuits, based on a-IGZO thin-film transistors (TFTs) with a simple staggered bottom gate structure, allow row and column selection of a sensor matrix embedded in a flexible radiation sensing system. They include on-chip clock generator (ring oscillator), column selector (shift register) and row-selector (a frequency divider and a shift register). They are realised with rail-to-rail logic gates with level-shifting ability that can perform inversion and NAND logic operations. These logic gates are capable of providing full output swing between supply rails, VDD and VSS, by introducing a single additional switch for each input in bootstrapping logic gates. The circuits were characterised under normal ambient atmosphere and show an improved performance compared to the conventional logic gates with diode connected load and pseudo CMOS counterparts. By using these high-performance logic gates, a complete rail-to-rail frequency divider is presented from measurements using D-Flip Flop. In order to realize a complete compact system, an on-chip ring oscillator (output clock frequency around 1kHz) and a shift register are also presented from simulations, where these circuits show a power consumption of 1.5mW and 0.82mW at a supply voltage of 8V, respectively. While the circuit concepts described here were designed for an X-ray sensing system, they can be readily expanded to other domains where flexible on-chip timing signal generation is required, such as, smart packaging, biomedical wearable devices and RFIDs.

25 May 2020 in IEEE Journal of the Electron Devices Society
Verified
Journal Article
Open access
BTBhawna Tiwari
Bhawna Tiwari
PBPydi Ganga Bahubalindruni
Pydi Ganga Bahubalindruni
ASAngelo Santos
Angelo Santos
ASAna Santa
Ana Santa
CFCatia Figueiredo
Catia Figueiredo
Pedro BarquinhaPedro Barquinha
Pedro Barquinha
This paper presents a high-speed ring oscillator (RO) with amorphous Indium-Gallium-Zinc-Oxide Thin-film transistors (a-IGZO TFTs). The proposed RO reduces the delay of a single stage inverter using intermediate signals generated within the RO, hence, improving the speed. To validate the proposed idea, two conventional ROs (with diode-load load inverter and bootstrapped pseudo-CMOS inverter) and the proposed RO were fabricated at a temperature ≤ 180∘C. Measured results of the proposed RO have shown a frequency and power-delay-product (PDP) of 173.2kHz and 0.7nJ at a supply voltage of 6V. Further, it shows approximately 155% (44%) increase in frequency and 14% (24.5%) decrease in PDP compared to diode-load inverter (bootstrapped pseudo-CMOS inverter) based ROs. Therefore, the proposed RO finds applications in low-voltage and high speed designs for timing signal generation.

8 November 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
BTBhawna Tiwari
Bhawna Tiwari
PBPydi Bahubalindruni
Pydi Bahubalindruni
This work presents a low-voltage D-type flip flop (D-FF) and its application in the sequential circuits, namely shift register (SR) and counter. These circuits were fabricated on a 30μm thick polymide substrate using single-gate indium-gallium-zinc-oxide (IGZO) thin-film transistors (TFTs). The proposed D-FF is designed using only 18 n-type transistors. This circuit has shown almost 100% improvement in frequency of operation compared to state-of-the-artwork from measurements at a low power supply voltage of 4V. In addition, the resulting 6-bit SR and 6-bit counter show expected functionality with the proposed D-FF. These circuits would find potential applications in display drivers and flexible smart sensing systems.

24 January 2020 in International Journal of Circuit Theory and Applications
Verified
Journal Article
Closed access
PDF file
BTBhawna Tiwari
Bhawna Tiwari
PBPydi Ganga Bahubalindruni
Pydi Ganga Bahubalindruni
João GoesJoão Goes
João Goes
Pedro BarquinhaPedro Barquinha
Pedro Barquinha

1 October 2020
Verified
Conference Paper
Closed access
BTBhawna Tiwari
Bhawna Tiwari
PBPrabal Bhatnagar
Prabal Bhatnagar
PBPydi Bahubalindruni
Pydi Bahubalindruni
Pedro BarquinhaPedro Barquinha
Pedro Barquinha
This paper presents a low-power ethanol sensing read-out circuit using amorphous-Indium-Gallium-Zinc-Oxide thin-film transistors (a-InGaZnO TFTs). The read-out circuit is implemented with a proposed low-power high-speed ring oscillator (RO). The proposed RO employs bootstrapped pseudo-CMOS inverter, whose delay and power are reduced by using intermediate signals generated within the RO, hence, ensuring a high frequency of oscillations and low-power consumption. This design further ensures improved sensitivity of the readout circuit. To validate the proposed idea, 9-stage conventional low-power and proposed ROs have been designed and simulated using in-house a-InGaZnO TFT models at a supply voltage of 8V. Simulation results show that the proposed RO provides 11.8% improvement in the frequency of oscillations and 18.5% reduction in power consumption compared to the conventional design. Further, the proposed circuit has shown an improvement of 9% in the sensitivity compared to the conventional design. Therefore, this circuit finds potential application in read-out sensing systems.

7 November 2022 in IEEE Journal on Flexible Electronics
Verified
Journal Article
Closed access
BTBhawna Tiwari
Bhawna Tiwari
PBPydi Bahubalindruni
Pydi Bahubalindruni
SSSuyash Shrivastava
Suyash Shrivastava
JGJoao Goes
Joao Goes
This paper reports two important mixed-signal building blocks using uni-polar Oxide thin-film transistors (TFTs) on 30 μm thick polymide substrate, which find potential application in communication systems. These blocks include a low-voltage bootstrapped (BS) switch and a latch-type comparator designed using a device channel length of 2 μm. Functional demonstration of these blocks have been carried out from measurements under normal ambient conditions with a load of 10 MΩ||12 pF at a supply voltage ( VDD ) not exceeding 3V. While the BS switch shows a linear ON-resistance of 40 kΩ, at a VDD of 2V, without any voltage drop across it, the proposed comparator has shown a very low offset of 10mV with a decision time of 4 μs. These blocks helps in expanding the application of oxide TFT technology in communication systems to design the binary amplitude-shift keying (BASK) modulator and demodulator circuits.