Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy (>= 100 MeV) photoinjectors at SwissFEL and European x-ray free electron laser (XFEL) have reported much higher slice energy spread than expected at their XFEL working points (200-250 pC). In this paper, a new method for measuring slice energy spread at lower beam energy (similar to 20 MeV) is proposed and demonstrated at the PhotoInjector Test facility at DESY Zeuthen, and the results for 250 pC are much lower than those measured at high energy injectors.
1 September 2021 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
We present a new method to determine the electron density of a plasma by measuring the periodicity of modulations introduced to the longitudinal phase space of a relativistic particle bunch by the interaction with the plasma via the self modulation instability. As the modulation is solely depending on the plasma density and the beam parameters, this method allows to determine the time resolved density of a plasma at the position of beam passage, which is confirmed in particle-in-cell simulations. Densities in the range of 3.6 x 1012 cm-3 to 7.2 x 1015 cm-3 have been measured and the measurement accuracy is confirmed by comparison to spectroscopic plasma density measurements.
There is a high demand for intense THz sources since “many excitation mechanisms of matter resonate in the terahertz regime” especially for condensed matters. “Accelerator-based THz sources provide the wide tunability together with high intensity and repetition rates beyond 100 kHz, that will enable broad application at the European XFEL to the most interesting scientific problems in the field” [1]. Supported by European XFEL a proof of principle study is started at the Photo-Injector Test Facility located at DESY in Zeuthen site (PITZ). Since PITZ and European XFEL electron sources are identical the X-ray and THz radiation can be produced with identical bunch train structure so that for every X-ray pulse a corresponding THz pulse can be provided for the pump-and- probe experiments.
27 October 2022 in Physical Review Accelerators and Beams
Photoinjectors are the main high brightness electron sources for x-ray free electron lasers (XFELs). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It is well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depends on the signal to noise ratio and image processing procedures. Such sensitivities make the interpretations of beam transverse brightness challenging, leading to different emittance definitions to reduce the impact of tail particles. In this paper, transverse phase space is analyzed in action and phase coordinates for both analytical models and experiments, which gives a more intuitive way to calculate the beam core brightness.