1 March 2021 in IEEE Transactions on Power Electronics
The paper presents a simulation model of silicon carbide (SiC) power MOSFET that accurately predicts both the static and dynamic third quadrant behavior without compromising the first quadrant's accuracy. Unlike existing models, this model features an asymmetric third quadrant behavior for MOSFET characteristics necessary for accurate synchronous rectifier simulations. Moreover, it includes the gate-dependent body diode behavior, essential for accurate prediction of freewheeling high side device behavior in half-bridge configurations with significant gate voltage oscillation. The model also includes reverse recovery characteristics for accurate overshoot and power loss prediction. Despite having these added features, the model demonstrates good convergence and efficiency due to the replacement of conditional piecewise equations with continuous ones consisting of weighted variables. The model's convergence capability and efficiency have been verified by simulating a 5-level cascaded H-bridge multi-level inverter. The model's superior efficiency and accuracy have been validated by comparing it with an established SiC power MOSFET model. Also, an easy-to-follow parameter extraction procedure is documented that only requires data commonly available in commercial datasheets for broader utility. Considering accuracy, efficiency, and convenience, the model is useful for all power electronics converter applications
9 May 2022 in IEEE Transactions on Transportation Electrification
Gallium nitride (GaN) high electron mobility transistors (HEMTs) are excellent power semiconductor devices due to their superior material properties compared to their silicon (Si) counterparts. It has demonstrated a fast switching speed with high dV/dt, enabling the designer to push the switching frequency toward the MHz range. However, traditional wire-bonded packaging becomes a limiting factor in fully harnessing the benefits offered by these advanced power devices, as it is likely to introduce voltage overshoot, oscillation, parasitic turn-on, and electromagnetic interference (EMI) issues; thus, improved and advanced packaging structures are a must to bridge the gap. Besides, the unique electrical behavior and footprint of GaN compared to Si and Si carbide make them have different requirements for power module integration. To seek a viable solution, a globally optimized double-sided cooled, gate driver integrated 650-V/60-A GaN half-bridge power module is presented herein. The proposed 3-D integrated hybrid solution delivers an optimized package, having power loop inductance and thermal resistance as low as 0.91 nH and $0.38~^{\circ }\text{C}$ /W, respectively, which is verified using simulation and experimental results. The overall utility of the design improved proportionately by introducing simple, yet effective electrical/thermal codesign approaches, which can be applied to future power modules, designed for separate applications.
4 November 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Hybrid Si/SiC switches are gaining increased attention for designing high-efficiency and high-power density energy conversion systems. They offer very good conduction and switching power loss performance compared to using only Si IGBT or SiC MOSFET devices as a result of combining the best properties of both devices. Several Si/SiC gate control strategies, gate driving approaches, and packaging considerations have been proposed in the literature. This paper presents a comprehensive review and performance comparison of the different Si/SiC gate control strategies, gate driver solutions and packaging approaches that are already proposed in literature. In addition, it aims to provide a general guideline for selecting the appropriate Si/SiC gate control approach that is suitable for different applications considering several Si/SiC switch design properties. It also aims to establish a general metrics for evaluating the performance of different Si/SiC gate driver solutions that are proposed in literature in order to help the designer choose a suitable gate driver solution for different applications. Moreover, it highlights future research and development needs of hybrid Si/SiC switches in terms of gate control techniques, gate driver approaches and packaging solutions in order to achieve further performance improvements and fully exploit their benefits.
29 November 2022 in IEEE Transactions on Industry Applications
In this article, the static and dynamic characterizations for semiconductors with different materials, including silicon (Si), silicon carbide (SiC), and gallium nitride (GaN), are evaluated and compared at room temperature and cryogenic temperature (liquid nitrogen temperature). For static characterizations, the on-state resistance and threshold voltage are evaluated. For dynamic characterizations, the turn-on switching loss, turn-off switching loss, and dynamic on-state resistance ( R ds(on) ) are evaluated. The results demonstrate that Si and GaN based semiconductors have improved performances with lower on-state resistance and faster switching speed at low temperature operations. For SiC based semiconductors, the on-state resistance increases significantly at cryogenic temperature. The switching speed is reduced dramatically for the evaluated 1.2 kV SiC metal oxide semiconductor field effect transistors (MOSFETs) at cryogenic temperature. This makes it less attractive for cryogenic applications. For the evaluated 650 V and 900 V SiC MOSFETs, the switching speed remains almost unchanged at low temperature. GaN high electron mobility transistor (HEMT) demonstrates a fast turn-on switching speed at low temperature, where the device's dv/dt and di/dt are almost doubled when compared with room temperature. In addition, the dynamic R ds(on) of the evaluated GaN HEMTs also decreases at low temperatures. The evaluation results can serve as guidelines for cryogenic power electronics applications. Meanwhile, the future work for semiconductors cryogenic characterizations is discussed.
21 December 2018 in IEEE Transactions on Power Electronics
This paper presents a unified physics-based Insulated-Gate Bipolar Transistor (IGBT) compact model which predicts the performance of both Si and SiC, n- and p-channel devices. The model can predict the detailed switching waveforms of these technologies based on its charge-based formulation. Further, this novel IGBT compact model is presented alongside a unique datasheet-driven parameter extraction process. The parameter extraction process enables users to quickly extract model parameters from data typically published without the need of taking physical measurements. The model has been validated with both Si and SiC devices for static and dynamic characteristics. The SiC IGBTs used for validation are a 12.5 kV n-channel device and a 13 kV p-channel device, while the Si IGBT chosen was IXBK55N300 from IXYS. This is the only IGBT model that predicts the performance of both n- and p-channel, Si and SiC devices, providing more freedom for the development of complex power electronics circuit designs. The convergence of the model has been verified by implementing a complex circuit consisting of both a DC-DC converter and a DC-AC inverter. The results presented here show that the unified model can be used to describe the behavior of a wide range of Si and SiC IGBT circuits. This paper is accompanied by a Verilog-A source code and a power point file demonstrating the model parameter extraction sequence.
6 November 2020 in IEEE Open Journal of Power Electronics
Transient simulation of complex converter topologies is a challenging problem, especially in detailed analysis tools like SPICE. Much of the recent literature on SPICE transistor modeling ignores the requirements of application designers and instead emphasizes detail, physical accuracy, and complexity. While these advancements greatly improve model accuracy, they also serve to increase computational complexity, making the resulting models less attractive to application designers. While some authors depart from this trend and present models which emphasize simulation speed, their results and analysis are limited to qualitative observation. This research develops a methodology to quantify the computational cost of model features and competitively benchmark models against each other. Additionally, it reviews recently published SiC MOSFET models and presents a trade study on several candidate models likely to fare well in complex application simulations. Finally, this study also identifies key considerations which should be carried forward into future model design.