This paper focuses on the integration of Digital Addressable Lighting Interface (DALI) devices in wireless sensor networks. Since different manufacturers usually deal with one aspect of building automation - e.g. heating ventilation and air conditioning, lighting control, different kinds of alarms, etc. - final building automation system has different subsystems which are finally taken to an integrated building management system. The cost of this process is consequently increased due to additional hardware investment. Our main purpose is to provide the end consumer with an economical fully centralized system in which home appliances are managed by an IEEE 802.15.4-based wireless sensor network. Not only is it necessary to focus on the initial investment, but maintenance and energy consumption costs must also be considered. This paper explains the developed system along with a brief introduction to usual building automation protocols. Finally it presents future work in this field.
14 December 2011 in Lighting Research & Technology
This paper focuses on the development of an energy-efficient street lighting remote management system making use of low-rate wireless personal area networks and the digital addressable lighting interface (DALI) protocol to get the bidirectional communication necessary for checking lamp parameters like lamp status, current level, etc. Because of the fact that two-thirds of the installed street lighting systems use old and inefficient technologies, there exists a huge potential to renew street lighting and save energy consumption. The proposed system uses the DALI protocol in street lighting, increasing the maximum number of ballasts that can be controlled with DALI – originally it can only drive up to 64 ballasts. Some aspects of the wireless communication system and experimental measurements are presented and discussed.