This paper focuses on the integration of Digital Addressable Lighting Interface (DALI) devices in wireless sensor networks. Since different manufacturers usually deal with one aspect of building automation - e.g. heating ventilation and air conditioning, lighting control, different kinds of alarms, etc. - final building automation system has different subsystems which are finally taken to an integrated building management system. The cost of this process is consequently increased due to additional hardware investment. Our main purpose is to provide the end consumer with an economical fully centralized system in which home appliances are managed by an IEEE 802.15.4-based wireless sensor network. Not only is it necessary to focus on the initial investment, but maintenance and energy consumption costs must also be considered. This paper explains the developed system along with a brief introduction to usual building automation protocols. Finally it presents future work in this field.

Public lighting represents a large part of the energy consumption of towns and cities. Efficient management of public lighting can entail significant energy savings. This work presents a smart system for managing public lighting networks based on wireless communication and the DALI protocol. Wireless communication entails significant economic savings, as there is no need to install new wiring and visual impacts and damage to the facades of historical buildings in city centers are avoided. The DALI protocol uses bidirectional communication with the ballast, which allows its status to be controlled and monitored at all times. The novelty of this work is that it tackles all aspects related to the management of public lighting: a standard protocol, DALI, was selected to control the ballast, a wireless node based on the IEEE 802.15.4 standard with a DALI interface was designed, a network layer that considers the topology of the lighting network has been developed, and lastly, some user-friendly applications for the control and maintenance of the system by the technical crews of the different towns and cities have been developed.

Energy consumption in the residential sector represents a global average of around 30% of the total consumed in the country, so any improvement that could reduce it, would have significant effects. Some of these upgrades are the incorporation of advanced communication and control algorithms based on predictive models of household consumption. This article describes the design, development and application of a fully centralized system in which home appliances are managed by a wireless sensor network. The management algorithms are based on consumption models in combination with timing schedule, power, temperature or ambient light measurements and prioritization. On the control side, on-off management is basically presented although DALI protocol for lighting continuous regulation is now implemented too. Finally it presents future work in this field.

Cyber–physical systems involve the creation, continuous updating, and monitoring of virtual replicas that closely mirror their physical counterparts. These virtual representations are fed by real-time data from sensors, Internet of Things (IoT) devices, and other sources, enabling a dynamic and accurate reflection of the state of the physical system. This emphasizes the importance of data synchronization, visualization, and interaction within virtual environments as a means to improve decision-making, training, maintenance, and overall operational efficiency. This paper presents a novel approach to a cyber–physical system that integrates virtual reality (VR)-based digital twins and 3D SCADA in the context of Industry 4.0 for the monitoring and optimization of an olive mill. The methodology leverages virtual reality to create a digital twin that enables immersive data-driven simulations for olive mill monitoring. The proposed CPS takes data from the physical environment through the existing sensors and measurement elements in the olive mill, concentrates them, and exposes them to the virtual environment through the Open Platform Communication United Architecture (OPC-UA) protocol, thus establishing bidirectional and real-time communication. Furthermore, in the proposed virtual environment, the digital twin is interfaced with the 3D SCADA system, allowing it to create virtual models of the process. This innovative approach has the potential to revolutionize the olive oil industry by improving operational efficiency, product quality, and sustainability while optimizing maintenance practices.

Wireless sensors networks have an enormous potential for measuring environmental parameters such as those found in building or residential scenarios. The range of available sensors is not only limited temperature, gas, humidity or presence detection, but even power grid analyser can be integrated. This work aims to develop a Home energy management system for a residential scenario or nanogrid. Inside this nanogrid and using short term power availability together with demand response techniques, the system will be able to control and schedule the main domestic loads such as heating, air conditioning and ventilation systems, white goods or lighting among others. The control system is designed following the latest machine-to-machine (M2M) communication trends and standards defined by the oneM2M consortium. Thus, a first approach to the Message Queue Telemetry Transport (MQTT) protocol is presented as a means of developing a smart home appliances control using devices with limited resources.

More and more human activities are increasingly dependent on the power quality energy they are supplied. In particular, those loads that have an electronic switching mode power supply (SMPS) and microcontrollers or microprocessors are very susceptible to de-energization of the AC line as voltage monitoring takes place on the DC end and may not have enough time to cope with a voltage event involving energy loss. There have been many proposals that analyze power quality or current consumption, even those using limited resources hardware or the classic formulas of discrete root mean square (RMS). In this proposal, an approximation to the problem by means of an RMS value estimator that uses as a base a microcontroller of basic range and low economic cost and algorithms of calculation of very low computational cost that elude complex arithmetic operation to controllers, such as powers or roots, is presented. The results of the experiments to which the proposal was subjected show its ability to provide an estimation of the RMS value of voltage with sufficient precision or an event alarm in less time than the options analyzed. The validation tests and functional comparison of the prototype which were carried out support its viability.