24 December 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
Ternary logic has been studied for several decades as it can offer significant advantages to reduce the number of interconnects and the complexity of operations. However, the excessive transistor count of the existing ternary logic gates will diminish these advantages in practice. In this paper, based on the negative capacitance (NC) feature of the ferroelectric materials and the well-proven electronic properties of the carbon nanotube field-effect transistor (CNTFET), we have proposed ultra-compact ternary logic gates. After developing a NC-CNTFET model, we have designed a 2-transistor ternary inverter, a 4-transistor ternary NAND, and a 4-transistor ternary NOR with the structures and transistor counts similar to the binary complementary metal-oxide-semiconductor (CMOS) logic. The simulation results ascertain the correct and robust functionality of the proposed ternary gates, even in the presence of process variations. Our proposed ternary inverter, NAND, and NOR gates lead to on average 65%, 60%, and 60% improvements in transistor count, 79%, 83%, and 77% improvements in the area, and 34%, 61%, and 54% improvements in energy-delay product (EDP) as compared to the previous state-of-the-art ternary gates. Our approach accentuates that the proposed ternary gates are the potential candidates for demonstrating more complex multi-valued arithmetic-logic units.
22 September 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Recently, integrating ferroelectric materials with nanotransistors such as carbon nanotube field-effect transistors (CNTFETs) has opened new doors for demonstrating a new generation of ultra-miniature circuits and systems. Utilizing the negative differential resistance effect in negative capacitance CNTFETs (NC-CNTFETs) has spurred the efforts for designing ultra-compact ternary circuits and systems similar to their binary structures. This paper presents an ultra-efficient ternary image edge detection hardware using NC-CNTFET technology. The proposed hardware is endowed with a noise reduction circuitry to mitigate the noise effects. Using four 1x 3 kernels and concatenating the image pixels, the proposed ternary hardware has been designed using only 50 transistors. The proposed ternary hardware at the circuit level shows, on average, 74% improvements regarding power delay-product (PDP) compared to the CNTFET-based counterparts. Our comprehensive simulations indicate that the proposed NC-CNTFET-based hardware shows a 40% improvement in data loss, 2.2 times improvement in performance ratio, and 1.14 times improvement in Pratt's figure-of-merit, respectively, compared to the related designs. Our results accentuate that the proposed NC-CNTFET-based ternary hardware is a breakthrough achievement in demonstrating ultra-efficient and noise-immune ternary image processing circuits beyond the conventional binary counterparts.
28 September 2022 in IEEE Transactions on Electron Devices
Preserving the data stored in a static random access memory (SRAM) during power gating or a sudden power outage is a necessary but costly need. This work proposes an ultraefficient auto-nonvolatile ternary SRAM (ATSRAM) cell using ferroelectric carbon nanotube field-effect transistors (Fe-CNTFETs). By harnessing the unique features in Fe-CNTFETs, the proposed ATSRAM utilizes only 12 transistors. The proposed design can automatically perform backup and restore operations without additional resources and nonvolatile elements during a power outage. This unique specification eliminates the redundancies usually required to provide nonvolatility. The utilized hysteretic cross-coupled two-transistor standard ternary inverters (STIs) provide a superior static noise margin (SNM) beyond the binary SRAMs and the ideal noise margin limitation ( $\textit{V}_{\text{DD}}$ /4). The proposed ATSRAM array structure benefits from a row-shared supply disconnector to mitigate the static current drawn from the power supply during data retention. Our results demonstrate that the proposed ATSRAM indicates, on average, 40% improvement in transistor count, 2.8 times higher SNMs, 27% reduction in total power consumption, and 41% (66%) improvement in the read (write) energy compared with the state-of-the-art volatile ternary SRAMs. In a $\text{32}$ $\times $ $\text{32}$ ternary array configuration, 94% (98%) improvement in the read (write) energy is obtained compared with the other counterparts. Our design methodology provides a new paradigm for designing ultraefficient and ultracompact nonvolatile multivalued logic (MVL) memories using ferroelectric-based FETs.
1 October 2021 in Physica E: Low-dimensional Systems and Nanostructures
22 September 2021 in IEEE Access
Despite the advantages of ternary logic, it has suffered from excessive transistor count and limited noise margin. This work proposes an ultra-efficient nonvolatile ternary flip-flop (FF) based on negative capacitance carbon nanotube field-effect transistors (NC-CNTFETs). By harnessing the negative differential resistance effect in NC-CNTFETs, the proposed design is similar to a conventional volatile binary FF regarding the number of transistors and control signals. During a scheduled power gating or a sudden power outage, the proposed ternary FF benefits from an auto-backup/auto-restore capability without employing any additional transistors, nonvolatile devices, or control signals. This leads to zero device overhead, which is a breakthrough in designing nonvolatile memory circuits. On the other hand, the back-to-back slave latch’s hysteretic behavior provides an extraordinary static noise margin that transcends the noise margin of both conventional ternary and binary latches. The simulation results indicate that eliminating additional backup and restore circuitries provides 43% improvements in transistor count, 59% improvements in power saving and 98% improvements in energy-saving than state-of-the-art binary and ternary FFs. Moreover, the proposed design presents a 1.5 times higher static noise margin than the conventional binary and ternary FFs. Our proposed approach opens new doors in realizing ultra-efficient nonvolatile ternary circuits and systems in neuromorphic applications using ferroelectric-based transistors.
10 March 2022 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
In designing ultra-efficient noise immune nanoscale circuits and systems, Schmitt triggers (STs) are vital components influencing total functionality. This article proposes an ultracompact ST using ferroelectric carbon nanotube field-effect transistors (Fe-CNTFETs) and a robust ST latch. By using the unique electrical futures of the Fe-CNTFETs, the proposed ST has been designed in a particular way to only employ two transistors similar to a conventional binary inverter. Moreover, by utilizing the negative capacitance feature of the Fe-CNTFETs, the proposed ST can perform the backup and restore operation during a scheduled power gating or a sudden power outage without imposing any additional transistors, interconnects, and control signals. The proposed ST latch is hardened to soft errors occurring due to unwanted single-event upsets (SEUs). Our extensive simulations demonstrate that our proposed ST latch offers lower transistors counts (on average 34%) and more energy savings (on average 79%). On the other hand, our design has shown 5.6 times on average higher critical charge tolerance than the previous counterparts due to its soft error hardening circuity and the superior hysteresis behavior of the proposed Fe-CNTFET-based ST. Moreover, the auto-nonvolatility of the proposed ST makes the proposed latches immune to the sudden power outage, which was not devised in the previous ST latches. Our results show new pathways in designing ultracompact and efficient nonvolatile ST latches using the Fe-CNTFET technology.