6 December 2023 in Journal of Lightwave Technology
A novel torsion sensor based on modal interference and the Lyot filter by utilizing the exciting mode in the single eccentric hole-assisted dual-core fiber (SEHADCF). Based on the interaction between the polarization functional modes and the mode of the suspended core, the phenomena of the interference resonance enhancement and the enhanced Vernier are realized by only adjusting the polarization of the incident light. The sensitivity of the proposed sensor reaches 171.97 dB/rad and 58.87 nm/rad, respectively. Furthermore, the vector property of the polarization state makes it possible to identify both the direction and the degree of the twist applied on the structure. Due to the selective amplification only applied on the parameter of the vector, the crosstalk from other mechanical parameters, including curvature and strain, is decreased significantly. The crosstalk of the strain is low to 7.474 ×10 -7 rad/με. The proposed scheme of the sensor provides a new perspective of regulating both the polarization state and the fiber mode in the sensing field.
28 February 2025 in IEEE Transactions on Instrumentation and Measurement
In recent years, Machine Learning (ML) has been increasingly applied to the processing of optical signals, but traditional machine learning algorithms that rely solely on data processing require large datasets due to their inability to understand optical signals. An optical fiber sensing system based on the prior knowledge of physics is proposed to demodulate complex spectrum with a limited sample size. By extracting the projection of the domain of the optical path difference (OPD) by introducing both real and imaginary parts, the model realizes the mapping establishment of the interference principle, and overcomes the disadvantage of the traditional model that the required number of data sets is too enormous. And the performance of the model can be further improved by refactoring it to the parallel neural network with synthesized information. A torsion sensor with a complex spectrum is proposed to verify the demodulation ability of the model for multi-mode complex spectra. The model can realize the physics-based data augmentation and compression of the demodulation model. It enables the demodulation for the complex spectrum of fiber sensors with nonlinear and nonmonotonic responses by fewer training samples. Furthermore, the simultaneous demodulation of magnitude and orientation is achieved in combination with structural improvements based on spatial misalignment. The proposed model provides a new idea for the machine learning model employed in the fiber sensing system, and has a high application prospect in the field of optical sensing and the deployment of the Internet of Things.
13 June 2025 in Journal of Lightwave Technology
A method for dynamic inclination measurement based on bubble-in-fiber (BiF) optofluidic manipulation is proposed. The photothermal interaction induces the solute Marangoni flow in binary mixed solution. Strong capture of the microbubble on the fiber-end is achieved. The two-beam Fabry-Perot interferometer (FPI) is formed by microbubble attracted by the end-face of the single-mode fiber (SMF). The BiF is always attracted to the fiber end-face, regardless of the change in inclination. The equilibrium position of the BiF at the end-face is affected by the inclination angle, which in turn changes the reflected light intensity coupled back to the SMF. The proposed “probe-type” dynamic inclination sensor has a wide range of inclination response from 0-90°. In addition, its superior dynamic performance makes it possible to measure human leg postures. The intensity-based demodulation has the unique advantage of being low-cost and commercially available. It is expected to be integrated with wearable devices, making it a perfect candidate for sensing the motion of an organism online.