1 July 2024 in Journal of Instrumentation
We present the novel 2× 4 monolithic Silicon Drift Detectors (SDD) array of 1 mm thickness developed within the context of the SIDDHARTA-2 experiment for high-energy X-ray spectroscopy measurements of light kaonic atom transitions. It represents a state-of-the-art advancement in terms of detection efficiency with respect to the previous generation of detectors, having a thickness of 450 μm. The sensor features eight square SDD units with an active area of 8 × 8 mm2 each, arranged in a 2 × 4 matrix. Therefore, the total active area of the array is 32 × 16 mm2 while the total chip area is 36 × 20 mm2, including a 2-mm dead region on each side of the array. This new version of SDD arrays, manufactured by Fondazione Bruno Kessler (FBK), includes an additional electrode on its entrance window, designed to reduce charge sharing between adjacent channels and improve energy resolution. This article describes two different detection modules based on these arrays: the first module includes a single array, whereas the second one is composed of two 1 mm thick SDD arrays in a stacked configuration, in order to reach 2 mm of effective thickness and further increase the module detection efficiency. The first spectroscopic measurements obtained with the two modules will be also reported in the paper, showing the spectroscopic improvements that can be obtained with the additional electrode on the window and the efficiency improvements that can be obtained with the stacked module.
1 June 2025 in Journal of Instrumentation
We present a readout electronics system designed for Compton scattering detection using silicon drift detectors (SDDs). This system represents the first component of a Compton telescope to be integrated into a CubeSat module as part of the ComPol project. The instrument is designed to observe Cygnus X-1, a binary system consisting of a black hole and a blue supergiant star, with the aim of measuring its X-ray spectrum and polarization. Through the detection of Compton events, the system will determine the angle and degree of polarization of the source. The payload consists of a Si-based detector to scatter the X-rays and a scintillating cerium bromide crystal (CeBr3) with silicon photon multiplier (SiPM) matrix for the detection of the scattered photons. The analog readout chain of the first detection system based on SDD matrices consists of charge preamplifiers, an analog pulse processor (ASIC), while a field programmable gate array (FPGA) module handles the digital data flow to the PC. Experimental characterisation of the prototype shows an energy resolution of 151 eV full width at half maximum (FWHM) with a shaping time of 3 μs. This paper presents the prototype boards designed for the final flight module, together with the results of tests performed with the prototype system.