Kaonic atom X-ray spectroscopy is a consolidated technique for investigations on the physics of strong kaon–nucleus/nucleon interaction. Several experiments have been conducted regarding the measurement of soft X-ray emission (20 keV) from intermediate kaonic atoms (carbon, aluminum, and sulfur). In this context, we investigated cadmium–zinc–telluride (CdZnTe or CZT) detectors, which have recently demonstrated high-resolution capabilities for hard X-ray and gamma-ray detection. A demonstrator prototype based on a new cadmium–zinc–telluride quasi-hemispherical detector and custom digital pulse processing electronics was developed. The detector covered a detection area of 1 cm2 with a single readout channel and interesting room-temperature performance with energy resolution of 4.4% (2.6 keV), 3% (3.7 keV), and 1.4% (9.3 keV) FWHM at 59.5, 122.1, and 662 keV, respectively. The results from X-ray measurements at the DAΦNE collider at the INFN National Laboratories of Frascati (Italy) are also presented with particular attention to the effects and rejection of electromagnetic and hadronic background.
A large-area silicon drift detectors (SDDs) system has been developed by the SIDDHARTA-2 collaboration for high precision light kaonic atom X-ray spectroscopy at the DANE collider of Istituto Nazionale di Fisica Nucleare—Laboratori Nazionali di Frascati. The SDDs’ geometry and electric field configuration, combined with their read-out electronics, make these devices suitable for performing high precision light kaonic atom spectroscopy measurements in the background of the DANE collider. This work presents the spectroscopic response of the SDDs system during the first exotic atoms run of SIDDHARTA-2 with kaonic helium, a preliminary to the kaonic deuterium data taking campaign. The SIDDHARTA-2 spectroscopic system has good energy resolution and a 2 μs timing window which rejects the asynchronous events, scaling the background by a factor of . The results obtained for the first exotic atoms run of SIDDHARTA-2 prove this system to be ready to perform the challenging kaonic deuterium measurement.
The aim of the SIDDHARTA-2 experiment is to perform the first measurement ever of the width and shift induced by the strong interaction to the energy transition of kaonic deuterium. This ambitious goal implies a challenging task due to the very low X-ray yield of kaonic deuterium, which is why an accurate and thorough characterization of the experimental apparatus is mandatory before starting the data-taking campaign. Helium-4 is an excellent candidate for this characterization since it exhibits a high yield in particular for the transition, roughly 100 times greater than that of the kaonic deuterium. The ultimate goal of the work reported in this paper is to study the performances of the full experimental setup in view of the kaonic deuterium measurement. This is carried out by measuring the values of the shift and the width for the energy transition of kaonic helium-4, induced by the strong interaction. The values obtained for these quantities, for a total integrated luminosity of ∼31/, are and . The results, compared to the value of the shift measured by the SIDDHARTA experiment , show a net enhancement of the resolution of the apparatus, providing strong evidence of the potential to perform the challenging measurement of the kaonic deuterium.
The SIDDHARTA-2 experiment is presently installed at the interaction point of the DA$\mathrm{\Phi}$NE electron-positron collider of the National Laboratories of Frascati (LNF-INFN), in Italy, ready to perform the first measurement of the $\mathrm{2p \rightarrow 1s}$ x-ray transition in kaonic deuterium. This measurement, together with that of the kaonic hydrogen $\mathrm{2p \rightarrow 1s}$ x-ray transition, performed by the SIDDHARTA experiment in 2009, will allow the determination of antikaon-nucleon isospin-dependent scattering lengths. This paper presents a description of the SIDDHARTA-2 setup, which is getting ready for the kaonic deuterium measurement.
We present a readout electronics system designed for Compton scattering detection using silicon drift detectors (SDDs). This system represents the first component of a Compton telescope to be integrated into a CubeSat module as part of the ComPol project. The instrument is designed to observe Cygnus X-1, a binary system consisting of a black hole and a blue supergiant star, with the aim of measuring its X-ray spectrum and polarization. Through the detection of Compton events, the system will determine the angle and degree of polarization of the source. The payload consists of a Si-based detector to scatter the X-rays and a scintillating cerium bromide crystal (CeBr3) with silicon photon multiplier (SiPM) matrix for the detection of the scattered photons. The analog readout chain of the first detection system based on SDD matrices consists of charge preamplifiers, an analog pulse processor (ASIC), while a field programmable gate array (FPGA) module handles the digital data flow to the PC. Experimental characterisation of the prototype shows an energy resolution of 151 eV full width at half maximum (FWHM) with a shaping time of 3 μs. This paper presents the prototype boards designed for the final flight module, together with the results of tests performed with the prototype system.