Key Laboratory of Instrument Science and Dynamic Testing Ministry of Education and Shanxi Province Key Laboratory of Quantum Sensing and Precision Measurement, North University of China, Taiyuan, China
Auto-generated profile, based on publicly available information
Yuchong Jin
Key Laboratory of Instrument Science and Dynamic Testing Ministry of Education and Shanxi Province Key Laboratory of Quantum Sensing and Precision Measurement, North University of China, Taiyuan, China
Invisible microstrip defect detection is of great significance for ensuring the reliability of integrated circuits and improving the performance of communication system. In this article, the microwave fields radiated by six typically invisible microstrip defects were experimentally characterized with high accuracy based on quantum wide-field microscope, and the origin of microwave field contrast was theoretically analyzed. In a view of 1400 $\times$ 700 $\mu$ m $^{2}$ , the microwave near-field distribution radiated by invisible microstrip defects was reconstructed with a resolution of 1.63 $\mu$ m/pixel, and the microwave magnetic field detection sensitivity reached 0.7 nT/Hz $^{\mathrm{1/2}}$ . Meanwhile, the causes of microwave field discrepancies were analyzed specifically on the basis of microstrip transmission line theory. It was attributed to the transmission loss and the uneven distribution of induced current arising from variations in geometrical structures. The phenomenon validated the feasibility of detecting invisible microstrip defects utilizing the microwave field intensity distribution. The proposed approach is expected to have applications in microchip design and radio frequency (RF) equipment maintenance, thereby notably improving the practicability of quantum measurement technology.
6 October 2023 in IEEE Transactions on Instrumentation and Measurement
Measurement of radio frequency chip microwave field is of great importance for the manufacture of precision instruments and the development of integrated circuits. In this paper, the characterization of chip surface three-dimensional (3D) microwave field distribution was realized with high-resolution based on diamond nitrogen-vacancy (NV) centers, and the field-image separation technique was developed to suppress the stray light noise caused by the reflection of the chip. The feasibility of the proposed method was verified by characterizing the planar microwave fields at different powers and the 3D microwave fields at different frequencies radiated by an antenna chip with a characteristic linewidth of 100 μm. The microwave field of chip radiation was accurately reconstructed with a vertical resolution of 30 μm, and the optimal NV detection sensitivity is 0.8 nT/Hz 1/2 . The results provide a new approach for antenna radiation detection and on-chip measurement based on quantum detection techniques.
3 November 2023 in IEEE Transactions on Microwave Theory and Techniques
This article proposed a microwave (MW) detection method by utilizing the effect of the dual MW on nitrogen-vacancy (NV) centers in diamond. We established a theoretical model of dual MW superposition and experimentally discovered the unusual peak in the optically detected magnetic resonance (ODMR) spectrum. The peak frequency and the full-width at half-maximum of the unusual peak, as well as fluorescence intensity in the nonresonant frequency range of the ODMR spectrum, were systematically analyzed to obtain the frequency and amplitude of the measured MW signals. The broadband MW detection was realized in a wide range of 2240–4512 MHz by utilizing the linear relation between the magnetic field and the resonant frequency in the Zeeman splitting. The experiments showed that the minimum detection power was up to 1 $\mu$ W. The proposed approach can greatly improve the practicability of detecting MW fields on chip surfaces by quantum engineering techniques.
11 December 2025 in IEEE Transactions on Instrumentation and Measurement
The characterization of microwave fields holds significant engineering importance in high-frequency chip design and performance optimization. In this study, we propose a non-invasive wide-field imaging method based on the spectral hole-burning effect in optically detected magnetic resonance (ODMR). This wide-field imaging method enables imaging of microwave fields at different frequencies under near-field radiator operating conditions. Its feasibility is confirmed by characterizing near-field radiator-generated microwave fields across multiple frequency and power settings. Furthermore, the effectiveness of the method is validated through a comparative analysis of simulation results and experimental measurements. Under the current experimental conditions, the results show that the approach achieves a frequency resolution of 100 kHz over the range of the resonance region, a microwave detection sensitivity of 0.78 nT/Hz1/2, a spatial imaging resolution of 1.55 μm, and the minimum detectable power is 1 mW. The above methods indicate great potential for application in the fields of integrated circuit fault diagnosis, electromagnetic compatibility testing, and radio equipment parameter calibration.
1 July 2025 in Japanese Journal of Applied Physics
This paper proposes an approach for non-intrusively detecting digital microwave information by all-optical means. The measurement of the digital information was realized by taking advantage of the spin property and optical readability of the nitrogen-vacancy (NV) centers sensor. We convert microwave-carried information into fluorescence signals using diamond NV centers, and the fluorescence signals are then transformed into corresponding electrical signals using an avalanche photodiode. The performance of the system is experimentally evaluated. The time resolution for digital information detection is up to 50 μs, and the minimum detectable power is −2.04 dBm. This study indicates that the proposed method is feasible to accurately detect the digital information and has tremendous potential for the development of digital information processing by all-optical techniques.
30 July 2024 in IEEE Transactions on Microwave Theory and Techniques
The efficient and reliable detection of microwave signals is a key element of the breakthrough in new-generation communication technology. In this article, we proposed an approach for the simultaneous identification of multiple microwave signals in a continuous frequency range based on the spectral hole-burning effect of nitrogen-vacancy (NV) centers. The protocol combines the quantum wide-field imaging method with magnetic gradient means, breaking the narrowband and discrete detection limitations of conventional optically detected magnetic resonance (ODMR) techniques. The frequencies of multiple microwave signals can be accurately decoupled by locating the relevant gaps on resonance frequency curves. Meanwhile, the effects induced by fixed-frequency signals with different powers on the resonance frequency curves were systematically analyzed. The experimental results indicated that the system realized a multiple-frequency resolution of 1 MHz and a minimum detectable power of 1 mW over a continuous bandwidth of 313-MHz. This proposal is capable of real-time and simultaneous detection of multiple microwave signals, which remarkably improves the utilization efficiency of spectrum resources.