1 March 2024 in Applied Physics Express
Thermal crosstalk between array structures is a key factor in limiting the sensitivity of micro-nano array sensors. We propose a two-stage thermally isolated structure with thermal holes and heat dissipation layer and pulsed voltage heating to reduce thermal crosstalk. Through finite element thermal simulation analysis as well as thermal interference test, the results show that the thermal crosstalk of the two-stage structure is reduced by 12.89% and 39.67%, respectively, in the steady state compared to the structure with no thermal isolation, and pulsed voltage heating leads to the thermal crosstalk of the two-stage structure to be <10%.
2 July 2026 in Japanese Journal of Applied Physics
Near-field scanning microwave microscopy (NSMM) has a significant application in the field of semiconductor electronics and two-dimensional materials characterization. Here, this study proposes a two-port vector network measurement method based on the tip-sample model, which is based on the tip-coupling effect, and acquires the microwave S12 parameters by point-by-point scanning to realize the characterization of the spatial microwave field. Under the input power of 10 dBm and sub-micron tip-sample spacing, the method significantly improves the field contrast between the defect region and the surrounding region. In this study, high-resolution detection of the surface defect field distributions with dimensions of 4.7 μm × 2.7 μm and 4.9 μm × 3.7 μm was successfully achieved. The results indicate that the attenuation of the microwave signal caused by the defect regions was 0.49 nW and 0.54 nW, respectively. This method provides a reference nondestructive testing solution for device structures in microelectromechanical systems.
1 November 2023 in Applied Physics Express
The electron spin state of the NV color center in the diamond is optically polarized and read out by laser. However, laser irradiation introduces additional temperature noise, and the zero-field splitting term in the Hamiltonian becomes unstable. The main objective of this study is to explain and eliminate the influence of temperature noise generated by laser power and to propose a laser pulse shaping for detection. Experimental results show that the additional −2.8 MHz frequency drift introduced by the high-power laser is suppressed, under the condition of achieving the same resonance peak contrast of the high-power laser.
1 November 2023 in Japanese Journal of Applied Physics
In this paper, we establish a set of schemes to generate, detect, and identify the multi-frequency magnetic field in the extremely low-frequency range. Based on the magnetic sensitivity of nitrogen-vacancy centers in diamond, the schemes adopt frequency closed-loop proportion-integration-differentiation locking and microwave modulation and demodulation to obtain magnetic field information. A set of multi-coil mutual inductance devices is used to generate a multi-frequency AC magnetic field. In the schemes, the DenseNet network structure is used to train and identify the magnetic field information, with a recognition rate of 99.16%. When the Net is used to identify noisy signals, it still maintains an average recognition rate of 95.18% for random frequency noisy signals. This generating, detecting, and identifying schemes of the multi-frequency magnetic field in the extremely low-frequency range based on quantum sensors in this paper provides a novel idea for the future application of quantum sensors in biomedicine.
1 July 2025 in Japanese Journal of Applied Physics
This paper proposes an approach for non-intrusively detecting digital microwave information by all-optical means. The measurement of the digital information was realized by taking advantage of the spin property and optical readability of the nitrogen-vacancy (NV) centers sensor. We convert microwave-carried information into fluorescence signals using diamond NV centers, and the fluorescence signals are then transformed into corresponding electrical signals using an avalanche photodiode. The performance of the system is experimentally evaluated. The time resolution for digital information detection is up to 50 μs, and the minimum detectable power is −2.04 dBm. This study indicates that the proposed method is feasible to accurately detect the digital information and has tremendous potential for the development of digital information processing by all-optical techniques.