Digital technologies are undoubtedly associated with technical innovations and today occupy and important place in modern dentistry. According to Russian and foreign publications’ data, foreign developments in this area have been started more than 50 years ago, and in Russia their greatest spread was more than 10 years ago. Currently, there are various types of dental ceramics for CAD/CAM, thus an important task is to develop new technologies for mixing powders without the formation of agglomerates.
The materials used to restore the crown part of teeth after endodontic treatment in modern conditions are presented. The advantages of post-endodontic dental treatment using a variety of pin structures in the system of providing dental care to the population are shown. The relevance of the search and development of new domestic materials for intra-channel pins with improved properties is shown in the program that promotes import substitution in dentistry, thereby solving one of the main strategic components in improving the quality of life of the patient.
1 December 2021 in Journal of Physics: Conference Series
The problems of micro-arc oxidation of titanium alloy parts Ti-6Al-4V produced by electron beam melting technology were considered. The phase composition, thickness and roughnessof the obtained coating have been evaluated.
Currently, patients are increasingly turning to dentists with complaints about unsatisfactory dental aesthetics. All this is associated with both carious and non-carious lesions of the teeth. Methods of dental treatment today are diverse and satisfy the desires of even the most fastidious patient. So, in the treatment of dental caries, dentists prefer filling. All kinds of composite materials, mainly of foreign production, are used for sealing. Due to the changed global trends, we are faced with the task of finding and developing a new domestic nanofilled light-curing composite that will not be inferior in its properties and composition to leading foreign analogues.
Takingintoaccountthecontinuingsearchfortheoptimalmaterialfortheproductionofdentalimplants,itseemsrelevanttocompare,accordingtotheliterature,thephysico-chemicalproperties(mechanicalproperties,osseointegrationability,fatigueenduranceoftitanium(cpTigrade1-4,Ti-6Al-4V)andyttrium-stabilizedzirconiumdioxide(ZrO2) used for the production of dental implants. The analysis of published experimental clinical papers (in vitro, in vivo), studies using simulations based on the finite element method. The review shows a comparable ability to osseointegration in both materials, zirconium dioxide demonstrates a higher modulus of elasticity and hardness, but increased sensitivity to fatigue. Titanium retains the advantage of plasticity and proven long-term operation. Thus, titanium remains the most versatile and predictable material, while zirconium implants are a real and promising alternative for a number of clinical cases.
This paper presents a comprehensive analysis of zirconium oxide dental implants, including biomechanical modeling and an assessmentof the potential for additive manufacturing. The aim of the study was to validate the effectiveness of stereolithography for creating zirconiumimplants with complex geometries and compare their biomechanical behavior with their titanium counterparts. In the first stage, a finiteelement analysis (FEA) was performed in Ansys Mechanical. A 3D model of the crown-abutment-implant system integrated into cortical andcancellous bone (considered an orthotropic material) was used for the simulation. A static load of 250 N was applied to the titanium andzirconium models in five vector configurations. The results of the von Mises equivalent stress calculations showed that zirconium implants arecharacterized by a higher stress concentration within the body of the implant, but provide lower load transfer to the surrounding bone tissuecompared to titanium implants, especially under oblique impact, which is beneficial for bone preservation. In the second stage, a prototypeimplant (Straumann BLT NC 8 mm) was manufactured using layer-by-layer stereolithography (SLA) from zirconia partially stabilized with yttria.This technology allowed for the production of highly precise, thin-walled components with complex profiles, free of internal defects (cracksand pores), and with minimal waste. After sintering at 1400–1550°C, the resulting samples demonstrated flexural strengths of approximately1000 MPa and compressive strengths of 2070 MPa. The study results confirm that the combination of high strength properties of additivelybonded zirconia and favorable load distribution on bone tissue opens up broad possibilities for the personalized use of ceramic implants inclinical dentistry.