22 February 2021 in Revue Française de Géotechnique
Développé en France dans les années 1970, le clouage des sols est une technique de stabilisation des talus réalisés par déblai. Des inclusions subhorizontales assurent la stabilité de l’ouvrage par frottement avec le sol. Les réflexions engagées à l’occasion de la révision en cours de la norme NF P 94-270, sur le dimensionnement des massifs en sol renforcé, ont souligné le manque de connaissances quant aux efforts au parement, notamment sur l’influence du phasage de construction sur ces efforts. Afin de mener une étude paramétrique pour répondre à ces questions, des modèles réduits de paroi clouée ont été réalisés et instrumentés, puis centrifugés à l’Université Gustave Eiffel, campus de Nantes. Un protocole expérimental spécifique a été utilisé pour réaliser l’excavation en vol. Les évolutions des efforts le long des clous ont été mesurées à l’aide de fibres optiques équipées de réseaux de Bragg. Enfin, les déplacements du massif ont été observés à l’aide d’une technique d’imagerie appelée GeoPIV, les modèles centrifugés étant réalisés dans un caisson à face latérale transparente. L’élancement du massif cloué, (rapport entre hauteur du mur et longueur des clous) a une forte influence sur le comportement de l’ouvrage et en particulier sur la répartition des efforts au parement. La technique de GeoPIV a permis en outre de décrire les mécanismes de rupture des différents soutènements par clouage testés dans cette étude.
1 July 2024 in International Journal of Physical Modelling in Geotechnics
Among the different solutions to meet the increasing need for renewable energies, energy geostructures, and particularly energy piles, are very promising. However, their dual role (structural support and energy harvester) raises design questions and safety issues. In addition, they are often placed within a groundwater flow and the influence of seepage on thermal loadings and mechanical response is still to be characterised. In this perspective, centrifuge modelling can play a significant role as in lots of geotechnical problems. In the present case, reduced scale models present a supplementary advantage since diffusion timescales are highly reduced. Scaling factor for time is 1/N2 if scaling factor for lengths is 1/N. Nevertheless, the numerous phenomena to consider make it difficult to ensure the similarity between model and prototype. This paper derives and collates all the scaling laws and important points to be aware of when centrifuge modelling energy piles.
5 September 2022 in Revue Française de Géotechnique
Alors que nous consommons toujours plus d’énergie pour le chauffage et la climatisation de nos lieux de vie, les impératifs de lutte contre le changement climatique et la croissance de la population urbaine mondiale rendent crucial le recours à des sources d’énergies renouvelables. Parmi elles, les géostructures thermiques associent au rôle mécanique pour lequel elles sont conçues un rôle énergétique en captant l’énergie du sol de faible profondeur à l’aide de tubes échangeurs de chaleur connectés à une pompe à chaleur. Elles apparaissent donc comme une solution décarbonée, non intermittente, locale, à faible risque pour l’homme, aisément intégrable dans le mix énergétique et au taux de retour sur investissement raisonnable. Pourtant, certaines questions quant à leur dimensionnement thermomécanique, notamment en présence d’un écoulement souterrain en freinent toujours le développement à large échelle. Après avoir dressé un état de l’art détaillé pour rappeler les points d’achoppement subsistant, un groupe de pieux géothermique au sein d’un écoulement est étudié sous l’angle de la modélisation numérique et de la modélisation physique centrifugée. Les différents outils à disposition de la communauté scientifique pour lever les verrous restant sont présentés.
23 March 2023 in European Journal of Environmental and Civil Engineering
Development of energy geostructures into cities induces proximity interaction. When placed in a groundwater flow, advection effect will increase heat pump efficiency and avoid multiyear thermal shift. Yet, it also creates a thermal plume that can interact with downstream structures. In order to study these interactions, this article presents an experimental study conducted within the Sense City experimental facility, and a numerical hydraulic-thermal coupled model, developed with the FEM software CESAR-LCPC to extrapolate the experimental results. Both experimental and numerical studies allowed us to understand and estimate thermal interaction within a group of piles. Thermal interactions are strongly directional and aligned with the water flow, effects of multiple piles are cumulative and decrease within the distance. Simulation of heat pump efficiency show the benefits of underground water flow and thermal washing, increasing efficiency coefficient above 4 and erasing thermal cluster effect.
23 October 2023 in Revue Française de Géotechnique
Soil nailing is a technique developed in France during the 1970s for the retainment of excavations. The nails are steel bars introduced in the soil and preventing the soil mass to fail. Such structures are often designed through classical slope stability analysis software, i.e. based on Limit Equilibrium. The tension in the nails is generally considered equal to the maximum tensile forces admissible in the reinforcement. Yet, the service loads in the reinforcements are generally smaller than the calculated ones, especially at the bottom of the excavation because of the construction phasing. This is critical for the design of the facing and Limit Equilibrium based software need to be adapted by considering the construction phasing to modulate the mobilization of reinforcements. Based on the study of soil nailed walls through real-scale experiments, centrifuge and numerical modelling, an improvement of the limit equilibrium classical design is proposed. The software used was PROSPER, developed by Laboratoire Central des Ponts et Chaussées in the 1990s. The particularity of PROSPER is to derive the reactions of the nail by imposing a displacement of the failing soil mass. This displacement is generally considered as homogenous along the failure surface. However, considering a high displacement for the top nails (fully mobilized) and a small one for the bottom nails (partially mobilized) provide a relevant distribution of soil nail tensile forces. A distribution is proposed for such displacement and this design approach has been tested on an experimental wall, providing an efficient and time-saving design of soil-nailed walls.