Among the different solutions to meet the increasing need for renewable energies, energy geostructures, and particularly energy piles, are very promising. However, their dual role (structural support and energy harvester) raises design questions and safety issues. In addition, they are often placed within a groundwater flow and the influence of seepage on thermal loadings and mechanical response is still to be characterised. In this perspective, centrifuge modelling can play a significant role as in lots of geotechnical problems. In the present case, reduced scale models present a supplementary advantage since diffusion timescales are highly reduced. Scaling factor for time is 1/N2 if scaling factor for lengths is 1/N. Nevertheless, the numerous phenomena to consider make it difficult to ensure the similarity between model and prototype. This paper derives and collates all the scaling laws and important points to be aware of when centrifuge modelling energy piles.
23 March 2023 in European Journal of Environmental and Civil Engineering
Development of energy geostructures into cities induces proximity interaction. When placed in a groundwater flow, advection effect will increase heat pump efficiency and avoid multiyear thermal shift. Yet, it also creates a thermal plume that can interact with downstream structures. In order to study these interactions, this article presents an experimental study conducted within the Sense City experimental facility, and a numerical hydraulic-thermal coupled model, developed with the FEM software CESAR-LCPC to extrapolate the experimental results. Both experimental and numerical studies allowed us to understand and estimate thermal interaction within a group of piles. Thermal interactions are strongly directional and aligned with the water flow, effects of multiple piles are cumulative and decrease within the distance. Simulation of heat pump efficiency show the benefits of underground water flow and thermal washing, increasing efficiency coefficient above 4 and erasing thermal cluster effect.
21 November 2025 in International Journal for Numerical and Analytical Methods in Geomechanics
Natural soils often exhibit clearly anisotropic mechanical properties, yet this characteristic is frequently overlooked in numerical models due to the practical challenges of determining anisotropic parameters. As a result, the influence of anisotropy remains difficult to anticipate, and engineers have limited tools to incorporate it into design procedures. However, accounting for anisotropy is essential for producing accurate predictions of ground settlements caused by tunnelling. This paper aims to enhance the understanding of cross‐anisotropy effects on the ground surface response. A parametric analysis is performed using the finite element software CESAR‐LCPC. The study shows that anisotropy in elastic properties significantly affects key parameters of surface settlement distributions, particularly the maximum settlement and the width of the settlement trough. To assist with practical evaluations, the paper provides abacuses (design charts) and analytical approximation formulas that illustrate how the maximum settlement and trough width vary with different values of the anisotropy ratios. These results offer valuable insights and practical tools for geotechnical engineers aiming to incorporate anisotropic behaviour into settlement analysis. To further assess the practical applicability of the approach, a case history from the TULIP tunnelling project was analysed. Despite the complexity of real conditions—including three‐dimensional effects, staged excavation, and multi‐layered soils—the predictions obtained with the proposed method to take into account the soil anisotropy showed good agreement with field monitoring data, confirming its potential for use in preliminary design.
Le développement récent du transport ferroviaire a conduit à une forte augmentation du trafic durant la dernière décennie, augmentation qui devrait sepoursuivre dans la décennie à venir avec les futurs développements de ce mode de transport. L'augmentation du trafic se traduit pour l'infrastructure par une augmentation des sollicitations subies par les voies ferrées. La qualité des voies ferrées est garante de la performance du mode de transport ferroviaire,mais également de la sécurité des matériels roulants et des usagers de l'infrastructure. Conserver la qualité du réseau ferré est donc une priorité pour les gestionnaires d'infrastructures ferroviaires. Le ballast ferroviaire a pour rôle de répartir les efforts induits par la circulation des trains et d'assurer la bonne géométrie de l'infrastructure. La surveillance de la dégradation du ballast est donc primordiale pour assurer la qualité del'infrastructure.L'objectif de cette thèse est de proposer un outil numérique permettant d'anticiper la dégradation et le comportement d'une infrastructure ferroviaire sous trafic. Cet outil doit permettre de simuler efficacement lecomportement du ballast ferroviaire sous un grand nombre de cycles de chargements mobiles.Une première partie détaille la composition des infrastructures ferroviaires, précise les rôles du ballast et identifie les grandes lignes de son comportement.Il est fait le choix d'utiliser une méthode de représentation du ballast par élément fini et un modèle de comportement élastoplastique. Le ballast est alors traité comme un géomatériau continu répondant à des lois de comportementélastoplastique.Dans une seconde partie, les bases de la modélisation élastoplastique sont rappelées. Puis, plusieurs modèles de comportement issus de la littérature et comportant des éléments intéressants sont identifiés et étudiés.Dans une troisième partie, un nouveau modèle de comportement frottant compactant est proposé. Il est composé d’un critère nouveau et d'une loi d'écoulement originale. Enfin, le modèle est complété par la prise encompte, de la dégradation du matériau via une diminution de l'angle de frottement interne.Dans une quatrième partie, les méthodes stationnaires sont rappelées. Ces méthodes sont spécifiquement développées pour la modélisation des problèmes incluant des charges en mouvement. Les différents algorithmes sont implémentés àl'aide d'un code de calcul développé dans le logiciel Matlab et à l'aide du logiciel d'éléments finis COMSOL Multiphysics. En particulier, la méthode stationnaire à double échelle de temps, qui est un développement nouveau, permet la modélisation rapide d'un grand nombre de cycles de chargements et la prise en compte des effets d'usure du matériau.Dans une dernière partie, les deux principaux modèles tridimensionnels utilisés sont présentés. Sur un faible nombre de cycles de chargements, divers résultats sont établis selon les différents modèles de comportement utilisé. Sur un très grand nombre de cycles de chargements, les résultats obtenus montrent l'évolution des déformations irréversibles de la structure et de la dégradation du matériau.