1 November 2014 in Journal of Vacuum Science & Technology B
A full-color reflective display system with potentially unprecedented performances on brightness, color saturation, and contrast ratio is proposed. A three-layer architecture is employed to achieve maximum brightness, wherein the key components of every layer are reflective color filters based on high-contrast gratings that are designed and fabricated. The reflective filters exhibit both high reflectance and high color saturation. Switching of each color filter using electrowetting is proposed, and the feasibility of switching is proved. Finite-difference time-domain-based simulations are used in the design of the filters as well as to evaluate their performance. The fabrication process, which combines interference lithography, nanoimprint lithography, linewidth tuning, and reactive ion etching, is developed and optimized. The blue and the green filters are both fabricated and characterized experimentally.
15 October 2014 in Journal of Vacuum Science & Technology B
High-contrast gratings are designed and fabricated and their application in a parallel spectrum splitting dispersive element is proposed that is found to have the potential to improve the solar conversion efficiency of a concentrated photovoltaic system. This proposed system will also lower solar cell cost in the concentrated photovoltaic systems by replacing the expensive tandem solar cells with cost-effective single-junction solar cells. The structures and parameters of the high-contrast gratings for the dispersive element are numerically optimized, and a large-area fabrication is experimentally demonstrated using nanoimprint lithography and dry etching. Both the quality of the material and the performance of the fabricated device are experimentally characterized and discussed.
1 November 2015 in Journal of Vacuum Science & Technology B
A three-dimensional printing approach based on stereolithography with variable printing resolutions was invented to solve the trade-off between throughput and resolution. In this technology, the variable fabrication resolutions are achieved by switching laser wavelength. The key component to enable this technology is an optical filter based on high-contrast gratings. The optical filter has been designed and numerically studied using the finite-difference time-domain method and was fabricated using nanoimprint lithography. The minimum printing resolution of the accordingly constructed stereolithography apparatus is reduced to 37 μm. Variable pixel sizes from 37 to 417 μm have been demonstrated. Using the designed and fabricated optical filter is a promising method to optimize the manufacturing efficiency of the stereolithography process.