1 December 2018 in Journal of the Electrochemical Society
The ability to characterize bulk and interfacial transport properties of polymer electrolytes is critical to realizing their potential applications in electrochemical energy storage devices. In this study, we leverage custom microfabricated interdigitated electrode array (IDEs) as a platform to probe ion transport properties of polymer electrolytes films through electrochemical impedance spectroscopy (EIS) measurements. Using poly(ethylene oxide) (PEO) blended with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as a model dry polymer electrolyte system, we investigate how geometric parameters of the IDEs influence the quality and analysis of EIS measurements. By focusing on films on the nanometer film thickness (ca. 50 nm), EIS measurements revealed diffusional processes near the electrode/polymer interface that may be difficult to observe with conventional thick films. Moreover, irreversible impedance spectra were observed at elevated temperatures when using IDEs with large electrode metal fractions. These irreversible processes were eliminated through passivation of the IDE with different oxides (SiO2, Al2O3, or TiO2). Ultimately, the ionic conductivity of PEO-LiTFSI electrolytes is confidently determined when appropriate IDE geometries and equivalent circuits are used. Our work demonstrates the use of IDEs and nanothin polymer electrolytes films as a versatile platform for rapid and efficient interrogation of both bulk and interfacial electrochemical properties.
24 June 2019 in Nano Letters
22 February 2017 in Journal of Materials Chemistry A
Block copolymer electrolytes (BCEs) represent an attractive choice as solid-state ionic conductors for electrochemical technologies used in energy storage and conversion, water treatment, sensors, and data storage and processing. Unlocking the maximum ionic conductivity of BCEs requires an intimate understanding as to how the microphase separated structure influences transport properties. However, elucidating such knowledge remains elusive due to the challenging task of precisely engineering BCEs with a defined structure in bulk materials. In this work, we examined BCEs in a thin film format because it was amenable to attaining BCEs with a desired nanostructure. Specifically, we systematically investigated anion-conducting BCEs with different degrees of connectivity of the ionic domains. For the first time, we demonstrate that increasing terminal defects in the ionic domain from 1 terminal defect per μm2 to 20 terminal defects per μm2 (a relatively small amount of defects) decreased ionic conductivity by 67% compared to the maximum value attained. Conversely, maximizing ionic domain connectivity increased the ionic conductivity by two-fold over a non-ordered BCE film. These experiments highlight that microphase separation alone was insufficient for ameliorating ionic conductivity in BCEs. Rather, microphase separation coupled with complete ionic domain connectivity realized BCEs with significantly enhanced ionic conductivity.
1 November 2019 in Science Advances
Soft heteroepitaxy can produce sculpted grain boundaries with molded liquid-liquid interfaces and distortion-free soft crystals.
5 April 2017 in The Electrochemical Society Interface
Microphase separation of block copolymers provides a promising route towards engineering a mechanically robust ion conducting film for electrochemical devices. The separation into two different nano-domains enables the film to simultaneously exhibit both high ion conductivity and mechanical robustness, material properties inversely related in most homopolymer and random copolymer electrolytes. To exhibit the maximum conductivity and mechanical robustness, both domains would span across macroscopic length scales enabling uninterrupted ion conduction. One way to achieve this architecture is through external alignment fields that are applied during the microphase separation process. In this review, we present the progress and challenges for aligning the ionic domains in block copolymer electrolytes. A survey of alignment and characterization is followed by a discussion of how the nanoscale architecture affects the bulk conductivity and how alignment may be improved to maximize the number of participating conduction domains.
1 April 2019 in Molecular Systems Design & Engineering
The interfacial region where ion-transporting polymer chains are anchored to a hard, insulating phase is a major factor dictating the limits of ion-conduction in nanostructure-forming electrolytes. In this work, we investigate the effect of an end-grafted poly(ethylene oxide) (20 kg mol−1) surface on the ionic conductivity σ of PEO and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt mixtures. Specifically, we characterize nanothin films in the range of ca. 10 to 250 nm, which amplify the contributions from the polymer/substrate interface that dictate any deviations from expected bulk conductivity σbulk values. Conductivity measurements reveal a monotonic decrease in σ upon decreasing film thickness at all values of r (r = molar ratio of Li+ to EO units). The reduction from bulk-like σ occurs for film thicknesses approximately 100 nm and below for all values of r. This trend in conductivity arises from the presence of the underlying grafted-PEO layer. Through a thickness dependence normalized conductivity study, we observe nanoscale constraints leading to deviation from intrinsic conductivity of bulk PEO–LiTFSI electrolytes. These nanoscale constraints correspond to an immobile interfacial zone whose thickness hint ranges from 9.5 ± 1.4 nm at r = 0.01 to 2.9 ± 1.5 nm at r = 0.15 in our nanothin films that impedes ion transport. Overall, we have presented a robust platform that facilitates probing the role of polymer-grafted surfaces on the σ of polymer electrolytes.