High-power semiconductor laser with an integrated master oscillator power amplifier (MOPA) based on the surface-slotted structure is demonstrated. The lasing wavelength of 1.5 μm is achieved by using a group of micron-level slots fabricated by standard photolithography. The laser exhibits continuous-wave output power of up to 225 mW in the single-mode operation at room temperature. At the maximum output power, the modulation bandwidth is larger than 7 GHz, demonstrating the excellent performance of the MOPA based on the surface-slotted structure.
31 August 2022 in IEEE Photonics Technology Letters
A single-mode laser has been proposed and fabricated by standard photolithography, based on the $\mu \text{m}$ -level chirped photonic crystal. Side-mode suppression ratio (SMSR) over 45 dB and direct-modulation bandwidth up to 16.63 GHz has been exhibited by a $400~\mu \text{m}$ -long laser with the slope efficiency of about 0.22 mW/mA and the output power of about 33 mW. The device has a flat optical field distribution and can effectively suppress the longitudinal space hole burning effect along the cavity. A cost-effective solution is provided for the bulk production of the single mode laser.
A quasi-continuous tunable semiconductor laser covered full C-band is demonstrated. The quasi-continuous tuning range of the tunable semiconductor laser is significantly improved by optimizing the length of the phase section using the gain-lever effect, achieving a 36 nm range that covered the whole C-band. In the tuning range, 46 channels with 100 GHz spacing are achieved, and all channels exhibit a side mode suppression ratio above 30 dB. No regrowth or high-precision lithography is involved in the fabrication process of the tunable semiconductor laser, which has the potential to provide a cost-effective light source for dense wavelength division multiplexing systems.
A specially designed InP semiconductor optical amplifier (SOA) is flip-chip bonded to the silicon-on-insulator photonic circuit, in which only horizontal alignment is involved reducing the complexity of integration and light is evanescently coupled to the silicon waveguide from the SOA. Two groups of slots are applied as two high-order Distributed Bragg Reflectors (DBR) to select a single mode in the silicon waveguide. Compared with the low-order grating, the slot structure with a feature size in the micrometer level can be fabricated by standard photolithography at a low cost. A single-mode continuous operation with a side mode suppression ratio of more than 30 dB is obtained and the measured output power is 2.5 mW with a threshold current of 116 mA at 20°C. The integrated III-V-on-Si single-mode laser with slotted feedback structure provides a low-cost solution for light sources on silicon.
An O-band monolithically integrated four-channel laser array based on high-order surface gratings is demonstrated. The fabricated laser array exhibits a wide bandwidth of up to 60 nm, with threshold currents ranging from 17 to 25 mA and slope efficiencies between 0.22 and 0.29 W/A. At an injection current of 200 mA, all side-mode suppression ratios (SMSRs) are above 40 dB, and the output power exceeds 36 mW. The high-order surface gratings are fabricated by standard lithography, which avoids high-precision lithography and a complex regrowth technique. A potentially cost-effective light source for coarse wavelength division multiplexing (CWDM) systems is provided.
16 August 2022 in IEEE Photonics Technology Letters
A tunable semiconductor laser based on surface high-order Bragg gratings with 50 GHz channel spacing is demonstrated for the first time. The tunable semiconductor laser can cover 62 channels at 25 °C, and the side mode suppression ratio (SMSR) of each channel is larger than 34 dB. To achieve such properties, the number, depth and periods of the slots of the tunable semiconductor laser are optimized by the 2-D scattering matrix method (SMM) to obtain denser reflection peaks with smaller full width at half maximum (FWHM) and higher reflectivity. The tunable semiconductor laser can be widely used in dense wavelength division multiplexing (DWDM) systems and can provide a promising light source for photonic integrated circuits.