Jie Xu

Jie Xu

Auto-generated profile, based on publicly available information

Jie Xu

National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2021 in IEEE Access
Verified
Journal Article
Open access
CZChun-Liang Zhang
Chun-Liang Zhang
XWxinzhen wu
xinzhen wu
JXJie Xu
Jie Xu
The magnetic levitation system is a typical open-loop unstable system. To weaken the chattering phenomenon of sliding mode control (SMC), a hybrid control strategy of particle swarm sliding mode-fuzzy PID control was designed. This strategy uses particle swarm optimization (PSO) to optimize the SMC using the method of exponential approach law, so as to obtain the best sliding mode surface parameters and exponential approach rate coefficients, thus shortening the time required to approach the stable region when the nonlinear system is far from the stable point; a state supervision controller was designed by analyzing the stable conditions of sliding mode. When the system approaches the stable region, it smoothly transitions to fuzzy PID control, thereby weakening the chattering phenomenon of SMC. To verify the dynamic performance of the designed algorithm, a magnetic levitation ball system was selected as the controlled object. Through simulation and experiment, it was verified that the controller had strong robustness and strong anti-interference performance. It effectively weakened the chattering and had good adaptability to external disturbance and state variable crossing.

8 July 2019 in Energies
Verified
Journal Article
Open access
PDF file
CCChuntao Chen
Chuntao Chen
JXJie Xu
Jie Xu
Xibo YuanXibo Yuan
Xibo Yuan
XWxinzhen wu
xinzhen wu
In the eddy current braking system of high-speed maglev, the peak braking force and the critical speed are key factors determining the performance of eddy current braking force. In this paper, the analytical formula of eddy current braking force is derived by a subdomain method considering the skin effect of the induction plate, and, subsequently, the characteristics of peak braking force and critical speed are analyzed. The analytical model is set up in a 2D Cartesian coordinate system. The Poisson equations in each subdomain are listed by treating the vector magnetic potential as a variable. By combining the boundary conditions between two adjacent subdomains, the expressions of eddy current density and magnetic density in the induction plate are obtained. Then, the analytical formula of the eddy current braking force is obtained by the Ampere force formula. The results of finite-element analysis confirm the validity of the analytical calculation. The methods of improving the performance of eddy current braking force under high speed are proposed by parametric analysis of peak braking force and critical speed, which provides guidance for the design of the eddy current braking system in high-speed maglev.

10 February 2023 in IEEE Access
Verified
Journal Article
Open access
JXJie Xu
Jie Xu
XYXiang Yu
Xiang Yu
GLGuan-Chun Li
Guan-Chun Li
YLYajian Li
Yajian Li
In recent years, research on high-speed or ultra-high-speed maglev systems has become increasingly popular, and different countries or teams have been committing to several different suspension technologies. Among them, due to the profound accumulation of research on the normal-conducting electromagnetic suspension technology, China is actively adopting this suspension technology to develop a new high-speed maglev train faster than 600 km/h , and this work is mainly on the basis of Transrapid (TR) trains and Shanghai Maglev Line (SHML). To evaluate the feasibility of this project, the speed limit of the TR maglev system was explored from the perspective of its suspension and guidance systems. The analysis process was carried out from two aspects of aerodynamic interference and track irregularity. As for aerodynamic interference, the aerodynamic and electromagnetic simulation models were established based on the actual maglev train. The anti-interference abilities of the suspension and guidance systems were analyzed from two aspects of steady-state and transient-state respectively. The results verified that the train could operate safely when its speed below 800 km/h and the cross-wind speed below 26 m/s . As for track irregularity, based on the actual track construction indicators of the SHML, the relationship between suspension gap fluctuation and the train speed was studied through a dynamic calculation model of the suspension control system. The results showed that the suspension system had a risk of track collision when the train speed was greater than 717 km/h . In summary, from the perspective of its suspension and guidance systems, the current TR maglev system on the SHML has an upper speed limit. The conclusion would be valuable for the development of ultra-high-speed maglev systems in the future.

6 April 2023 in Journal of Computational and Nonlinear Dynamics
Verified
Journal Article
Closed access
PDF file
BWBo Wang
Bo Wang
SLShihui Luo
Shihui Luo
JLJing Liu
Jing Liu
WMWeihua Ma
Weihua Ma
JXJie Xu
Jie Xu
In the research of rail vehicles, mechanism of curve passing is one of the hot spots, which essentially elucidates the conditions of vehicle curve passing and points out the direction for improving vehicle curve passing ability. As one of the new members of rail transportation, the curve passing capability of medium-low speed maglev directly affects its application and promotion in the field of rail transportation. In order to reveal the mechanism of curve passing for medium-low speed maglev, this paper first studies the necessary conditions for the conventional wheelset curve passing based on the mechanism of curve passing for the conventional wheelset. Second, on the basis of comparing the structure and motion relationship of the conventional wheelset, the independent wheelset and the magnetic wheelset (bogie of medium-low speed maglev), the theoretical derivation of the magnetic wheelset curve passing conditions are carried out to obtain its theoretical solution based on the curve passing conditions of the conventional wheelset. Finally, the conditions of curve passing for the magnetic wheelset are verified by dynamic simulation, and the mechanism of curve passing for the medium-low speed maglev bogie is revealed. Through the research, it can be found that: (1) The mechanism of curve passing for the magnetic wheelset is different from that of the traditional wheelset and the independent wheelset. The speed variance and regulating torque are the composite functions of running speed, curve radius, track gauge, superelevation, guiding stiffness and yaw angle of the magnetic wheelset. (2) When the magnetic wheelset passes through the curve, its motion posture switches between “” and “,” while the unilateral magnetic wheel shows a motion which is similar to “hunting.” (3) Ignoring the factors such as structure and irregularity, it can conduct that the curve capacity of the magnetic wheelset could be improved by increasing the curve radius, reducing the speed, curve superelevation and gauge to a certain extent. This study theoretically reveals the mechanism of curve passing for the medium-low speed maglev bogie, which provides a certain reference for the subsequent design of the medium-low speed maglev and the improvement of the medium-low speed maglev curve capacity.


15 September 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JXJie Xu
Jie Xu
CBChristian Benden
Christian Benden
YZYi Zhang
Yi Zhang
JLJie Li
Jie Li
Hans-Joachim KrauseHans-Joachim Krause
Hans-Joachim Krause
High-Tc radio-frequency (rf) SQUIDs are well researched and have been utilized in a range of applications. The rf SQUID operating in nonhysteretic mode has been elaborated theoretically in a few of literatures, among which an effective method of harmonic analysis was presented to find its optimum working point. A suitable flux-to-voltage curve of the rf SQUID should be acquired before applying the harmonic analysis method, but the approach of getting the suitable curve is unclear. This paper carried out a analysis with respect to the three harmonics which primarily affect the waveform of flux-to-voltage curves and came to the condition which need be satisfied to acquire the desirable kind of curves. In which, the one with the largest value of its maximum transfer function could be considered as working in the optimum condition. Three rf SQUIDs were employed in experiment to demonstrate the detailed procedure of determining their optimum working conditions, which were the rf frequencies and the attenuator voltages of their tank circuits. Judging from the experimental results, the method proposed in this article is very effective, the optimum working conditions of the three rf SQUIDs can be accurately obtained. The findings would be instructional for automatically setting the working conditions of high-Tc rf SQUIDs in practical applications.