6 February 2020 in Japanese Journal of Applied Physics
We prototyped the solid-state photon generator composed of silica-coated quantum dot (QD) and metamaterial element using the scanning probe microscope lithography. The metamaterial element acts as an optical resonator and controls the emission of QD. For prototyping the device, QDs were trapped in a nanohole formed, and then, a metamaterial element was set around it. We succeeded in observing fine photon emission peak from the prototyped devices by the micro photoluminescence measurement. The temperature-independent wavelength of the emission peak suggested the resonance of the QD emission and the induced current in the metamaterial element.
1 September 2025 in Review of Scientific Instruments
We propose an electric circuit that generates a high magnetic field with a variable pulse width using insulated gate bipolar transistor (IGBT) switching. One method to realize a magnetic field with a variable pulse width is to switch the circuit open and short using semiconductor devices. However, in the case of a coil load used to generate a high magnetic field, inductive energy is released as a surge voltage during high-current switching, which can lead to the failure of switching devices. Therefore, we proposed connecting an external circuit in parallel with the coil to absorb and dissipate the inductive energy and analyzed the surge voltage and current waveforms generated in the circuit. The analytical solution based on circuit analysis and the circuit simulation results showed good agreement, indicating the transient response waveforms of the current and surge voltage in the proposed circuit. Moreover, the results reveal a trade-off between the surge voltage and the current decay time constant, depending on the resistance and capacitance values of the external circuit. A switching circuit with anti-series connected IGBTs demonstrated the interruption of the discharge current (500 A peak, 1 ms FWHM pulse width, 3 kV surge voltage) at arbitrary timing for driving the magnetic field. From these results, a pulsed magnetic field with a variable pulse width was implemented.
17 June 2026 in Nuclear Fusion
High-repetition-rate target injection and precise steering of multiple laser beams are essential for realizing laser-driven inertial fusion energy (IFE) reactors. EX-Fusion Inc. has established a facility to demonstrate these capabilities for the Fast Ignition scheme named the EX-Fusion Continuous Operation Laser Reactor (XF-COLR). Laser beam tracking and illumination of a free-falling stainless steel ball with a diameter of 1 mm were carried out at 10 Hz using multiple nanosecond and femtosecond lasers. The system with real-time correction of beam positions continuously operated for up to 12 h under ambient conditions and for 2.5–3 min under vacuum. Tracking performance, evaluated as standard deviations for 1500 shots under vacuum conditions, reached 121–139 m in the horizontal direction and 63–121 m in the vertical direction. The expected uncertainty at the engagement point propagated from the sensors was approximately 157 m. To the best of our knowledge, this is the first demonstration of dynamic tracking of an injected target using multiple laser beams steered by mirrors at 10 Hz, providing a reference for the development of future IFE reactors.