Energy losses during the magnetization process of soft magnetic laminations depend on the excitation waveform. Manufacturers of magnetic materials may not provide losses for different excitation waveforms. This may affect the accuracy of the predicted losses which are used to estimate the performance of electrical equipment during the predesign stage. Thus, a characterization tool which is capable of measuring hysteresis loops under controlled magnetization is required. Digital characterization systems available in literature use expensive commercial power amplifiers. In this work, a cost-effective power amplifier circuit is developed and interfaced with a LabVIEW program to characterize soft magnetic materials. The measurements for a sinusoidal excitation from the proposed setup are validated with those from a standard commercial measuring setup. The system is also used to measure hysteresis loops for arbitrary magnetization conditions (magnetic flux density ( B) with harmonics). The proposed setup can operate over a frequency range 35-500 Hz. A small Epstein frame is also designed for measurements at higher frequencies (>200 and <; 500 Hz). A provision is also made to predict three components of dynamic hysteresis losses at any frequency in the above range using the loss separation approach. This capability of the setup enables the user to predict the losses at frequencies beyond the capability of the tool. The predicted losses using this algorithm are validated with measured losses. The proposed setup is cost-effective and can be developed easily using basic electronic components.
18 August 2023 in Journal of Magnetism and Magnetic Materials
Rotational loss forms a significant portion of total core losses in electrical machines. The influence of harmonics on the behavior of magnetic materials is inevitable as these machines are mostly supplied by power electronic converters. Minor loops in hysteresis curves due to harmonics lead to additional losses. While the case of alternating induction (1-D magnetization) with harmonics is thoroughly considered in the literature, the assessment of the effect of rotational magnetization (2-D magnetization) has not yet been done adequately. A qualitative evaluation of rotational hysteresis loops in the presence of minor loops is carried out. The impact of minor loops in the evolution of hysteresis loops under rotating fields is examined. A peculiar behavior of interleaving of hysteresis loops under rotational magnetization is observed, which will affect the total core loss. This analysis can be used to visualize flux patterns on account of rotational magnetization and to accurately predict the performance of a machine during its predesign stage.
12 September 2023 in IEEE Transactions on Magnetics
Predicting core loss and dynamic magnetization of soft magnetic materials for arbitrary excitations is crucial under high harmonic content. The dynamic losses for non-sinusoidal excitation evaluated using the Lavers’ formula and inverse Jiles-Atherton (JA) model are compared. The modeling of hysteresis curves with minor loops using the JA model is achieved by predicting three components of the magnetic field strength based on the field separation approach. The flux variation due to minor loops is considered by following the magnetic flux density in time using eddy current and excess field terms. The dynamic extension of the JA model to represent asymmetrical minor loops using the field separation approach is presented. The proposed method seems promising for use in finite element method (FEM) simulations for predicting iron losses in electromagnetic design problems involving power electronic converters.
It is essential to consider the anisotropic behaviour of soft magnetic materials to accurately estimate the core losses in the machine parts, wherein the direction of the magnetic field is a function of time and space. At T joints of transformers and tooth-yoke joints of rotating machines, the direction of magnetic fields changes as a function of time. Directional dependency of magnetic properties result in additional losses. Various formulations to model the anisotropic behaviour of hysteresis characteristics and corresponding losses of soft-magnetic materials are available in the literature. The Takács model is a computationally efficient mathematical formulation to model the hysteresis behaviour. In this work, an analytical extension to the Takács model is proposed to formulate the anisotropic behaviour of these materials. The variation of the model parameters with direction is studied, and their directional dependencies are formulated using suitable functions. The anisotropic behaviour of the grain-oriented (GO) materials along arbitrary directions is investigated using the proposed approach and it is found to be in agreement with measurements. This model can be used to formulate the complicated magnetic behaviour at joints in transformers and electrical machines.