8 July 2025 in Journal of Mechanics in Medicine and Biology
16 March 2026 in Medical & Biological Engineering & Computing
Fusion surgery involves replacing degenerated intervertebral discs with artificial implants, usually composed of titanium alloys or PEEK, requiring bone grafting to assist tissue growth. This study aims to evaluate numerically 3D-printed porous ceramic implants as a bioactive alternative. Clinical computed tomographies of an adult patient were used to reconstruct the geometry and to assign mechanical properties to L1 and L2 vertebrae, utilizing a patient-specific anisotropic micromechanics-based model. The influence of different microstructural choices on a porous hydroxyapatite-based scaffold was analysed through finite element analysis, simulating standing and flexion. The analyzed scaffolds included: microstructured Face Centered Cubic (FCC) and Kelvin-based devices with uniform porosity (75%), and a Voronoi microstructured scaffold with uniform (75%) and graded porosity (60% external, 90% internal). Homogenized models were considered as a potential strategy to reduce computational costs. The FCC geometry and graded Voronoi proved more mechanically resistant to failure. Homogenized mechanical properties simplified the model, but didn’t accurately represent microstructural behaviour and local mechanical failure couldn’t be suitably identified. Patient-specific models allowed for a more accurate representation of mechanical stresses, leading to a reduced risk of structural failure. Hydroxyapatite proves to be a promising material for 3D-printed lumbar interbody fusion cages, able to provide primary stability.
24 March 2026 in Biomedical Materials & Devices
Selecting an optimal bone graft for critical-sized defects in load-bearing regions such as the spine, long bones, and jawbone is essential to ensure structural integrity and promote bone regeneration. While fixation systems provide initial stability, the graft’s intrinsic mechanical properties determine its ability to withstand physiological loads. This study aims to experimentally characterize an innovative biomorphic bioceramic to calibrate a constitutive material model and evaluate its performance in in silico post-surgical scenarios. The ceramic scaffold underwent both static (axial and transverse compression and axial torsion) and fatigue (axial compression) mechanical testing to determine its key mechanical properties. These data were used to calibrate a material model, which was then implemented in finite element simulations of an interbody fusion procedure at the L4–L5 level to assess its mechanical performance under post-surgical loading conditions. The experimental tests highlighted an anisotropic material behavior, with the Young’s modulus in the direction of the main macroscopic porosity three-times higher the value measured in the transverse direction (4.65 vs. 1.60 GPa). The calibrated numerical model accurately reproduced the experimental results, showing negligible deviations (< 4%). Preliminary simulations indicated that the scaffold could adequately sustain post-fusion physiological loads, but further implant optimization is required to properly ensure mechanical stability. This study provided an in-depth mechanical characterization of a novel bioceramic, identifying its key mechanical properties. By integrating experimental and numerical approaches, the mechanical resistance of a bioceramic implant for lumbar interbody fusion was preliminarily assessed, paving the way for further developments in this field.