This article reports experimental data on a double-step technology for processing a model organic contaminant (m-cresol) adsorbed in the pores of an iron-containing carbon adsorbent (specific surface area 616 m2/g) under microwave irradiation. The first step comprised the decomposition of cresol into a hydrogen-containing gas and a carbon residue under plasma-catalytic conditions assisted by microwave irradiation at an induced temperature of 600°C. Cresol was completely converted after 25 min of the MW irradiation. The second step consisted of adsorbent regeneration (by CO2 treatment under MW irradiation to remove the carbon residue) followed by thermal shock treatment (by decomposition of a pre-adsorbed ammonium hydroxide). After the regeneration, the specific surface area was 500 m2/g. The regenerated adsorbent exhibited almost the same cresol adsorption capacity as the starting material.
In the production of light olefins from dimethyl ether, a nanozeolite catalyst modified with lanthanum and zirconium exhibited lower activity and selectivity than a magnesium-loaded zeolite catalyst. This is due to a higher percentage of strong acid sites in La–Zr/HZSM-5, which promoted secondary reactions and decreased the selectivity towards light olefins. Furthermore, the difference in the catalytic properties of the samples modified with Mg and La–Zr can be explained by the different concentrations of the methanol product: the methanol content was markedly higher in the presence of La–Zr/HZSM-5 than with Mg/HZSM-5. To gain better insight into the role of methanol in the synthesis of light olefins from dimethyl ether, the relative activity of Brønsted acid sites on the catalyst surface in the conversion of methanol and dimethyl ether was comparatively assessed using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). It was demonstrated that at high temperatures (above 260°C) the conversion of both DME and methanol occurs by the oxonium–ylide mechanism. However, there are differences in the formation routes of primary intermediates: formaldehyde from methanol, and ketene from dimethyl ether.
Газификация лигнина, модифицированного кластерами железа, под действием микроволнового излучения Газификация лигнина, модифицированного кластерами железа, под действием микроволнового излучения