This paper describes a recent activity in the development of a high-power microwave source based on a modified relativistic backward wave oscillator that is driven by an advanced version of a SINUS-family accelerator using a double-width pulse-forming line insulated with a modern synthetic oil. The relatively compact source of microwave pulses (0.6 GW, 20 ns, 9.4 GHz) can operate at a 100 pps repetition rate in a batch mode with batches of duration up to 15 s. The long-term stability of the oscillator performances during 106 pulses was achieved due to the improved conditions for explosive emission of the graphite cathode and the use of a titanium slow wave structure. Both factors prevented the shortening of the microwave pulses. With a proper choice of the magnetic field strength and longitudinal distribution and of the position of the resonant reflector, the pulse-to-pulse deviation of the microwave power was reduced with sacrifice in efficiency, which decreased from a simulated maximum efficiency of 44% to 40% in the simulation and to 35 ± 4% in the experiment. At an accelerating voltage of 418 kV and a magnetic induction of 0.64 T at the cathode, the standard deviation of the microwave pulsed power could be close to the voltage deviation.
13 January 2022 in IEEE Microwave and Wireless Components Letters
This article presents a work on development of a high-power radio pulse generator, which is a gyromagnetic nonlinear transmission line (GNLTL) in which periodically placed NiZn ferrites are saturated by an axial magnetic field produced by permanent magnets periodically placed inside the transmission line. Structurally, the line is a corrugated coaxial waveguide with permanent NdFeB magnets placed inside the inner conductor of the line. The transmission line geometry was optimized using numerical simulation by finite-difference time domain (FDTD) method. The excitation of high-frequency oscillations in the developed transmission line at central frequency of 1 GHz and above is shown experimentally using ferrite rings with 45 and 28 mm outer and inner diameters. The maximum peak power of microwave oscillations obtained in the experiments is 110 MW at the central frequency 1.3 GHz. The obtained RF power is comparable to that of more common GNLTL with continuous filling by ferrite rings having the same transverse size.
24 July 2015 in Instruments and Experimental Techniques
The design of L-S-band and X-band microwave calorimeters with an ethanol-based working fluid is described. The calorimeters are automatically controlled and have an improved wide-aperture load that absorbs microwave radiation.
The work on the development of a generator of high-power, high-frequency pulses based on a nonlinear transmission line with saturated ferrite is presented. A feature of the generator is that the ferrite rings are saturated in the field of permanent magnets, unlike traditional generators with a solenoid wrapped around the transmission line. Due to the changed structure of the inner conductor, which is a corrugated conductor, the line has spatial dispersion. The paper demonstrates the generation of high-frequency pulses with a duration of up to 6 ns and a center frequency of 2.7 GHz. This pulse duration with a frequency above 2 GHz was not previously observed in traditional nonlinear transmission line geometry. The maximal peak power achieved was 70 MW for an incident voltage pulse of 90 kV. The energy efficiency of video pulse energy conversion into radio pulse was 6% [G. Kataev, Electromagnetic Shock Waves (Sov. Radio, Moscow, 1963)]. The paper discusses the performance of RF and microwave NiZn ferrites for the purposes of radio pulse generation.
Nonlinear transmission lines with ferrite have been actively developed and studied for about two decades. At the same time, the first works on this topic date back to the middle of the last century. Nonlinear transmission lines with ferrite find their application in various problems of electrophysics, with the greatest application being found in the problems of pulse sharpening, as delay lines and generators of high-power pulses of microwave radiation. The main scientific and technical results of the development of technologies of nonlinear transmission lines with ferrite are presented in chronological order, starting from lines for sharpening the fronts of voltage pulses, ending with multichannel microwave sources based on them. Keywords: high power microwaves, ferromagnetic materials, pulsed power, electromagnetic shock waves.