A. Ashok

A. Ashok

Auto-generated profile, based on publicly available information

A. Ashok

Seccin de Electrnica de Estado Slido- Ingeniera Elctrica (SEES), CINVESTAV- IPN,Ciudad de Mxico,Mexico

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 October 2024
Verified
Conference Paper
Closed access
Francisco Javier CanoFrancisco Javier Cano
Francisco Javier Cano
Odin Reyes VallejoOdin Reyes Vallejo
Odin Reyes Vallejo
VSVelumani Subramaniam
Velumani Subramaniam
SCSandrine Coste
Sandrine Coste
AAA. Ashok
A. Ashok
AKA. Kassiba
A. Kassiba
Mechanosynthesis, particularly through high-energy ball milling, offers a potent method for the fabrication of nanohybrids. This study explores the characterization of TiO 2 and graphene oxide (GO) nanohybrids, focusing on their optical and electrical properties, as well as their photocatalytic performance. Optical measurements showed a reduction in the bandgap from ≈3.27 eV in pristine TiO 2 to ≈3.02 eV in milled TiO 2 , while electrical conductivity increased from 5.59 × 10 -9 to 2.48 × 10 -8 S/cm. Despite these improvements, the addition of GO did not significantly impact the bandgap or electrical properties of the nanohybrids. Photocatalytic experiments using methylene blue (MB) under visible light irradiation demonstrated a dye degradation of ≈30-32% in all hybrid samples, indicating consistent photocatalytic activity regardless of GO oxidation degrees.

22 October 2025
Verified
Conference Paper
Closed access
Francisco Javier CanoFrancisco Javier Cano
Francisco Javier Cano
AKA. Kassiba
A. Kassiba
VSVelumani Subramaniam
Velumani Subramaniam
ELEnrique Lima
Enrique Lima
Odin Reyes VallejoOdin Reyes Vallejo
Odin Reyes Vallejo
GAGuillermo Aguilar
Guillermo Aguilar
Efficient water remediation by titanium dioxidegraphene oxide $(\text{TiO}_{2}-\text{GO})$ nanohybrids is governed by their nanoscale architecture, which controls both adsorption and photocatalytic behaviors. In this study, the influence of GO concentration on the structural and functional properties of $\text{TiO}_{2}$-GO hybrids was systematically examined. Hybrids containing 2, 5, and $10 \text{wt}. \%$ GO were synthesized through a sonicationassisted assembly method. A progressive morphological transition was revealed by high-resolution transmission electron microscopy: partial core-shell structures at 2 wt.%, uniform encapsulation at 5 wt. $\%$, and $\text{TiO}_{2}$ particles entrapped within extensive GO agglomerates at $10 \text{wt}. \%$. As a result of these transitions, a clear trade-off between adsorption and photocatalysis was observed. Methylene blue adsorption was enhanced monotonically with increasing GO content, whereas photocatalytic activity was maximized at 2 wt.% GO and subsequently diminished at higher loadings. This contrasting behavior was attributed to competing mechanisms, in which increased surface area promoted adsorption while excessive GO induced light shielding, diffusion barriers, and accelerated charge recombination. It is therefore demonstrated that optimal performance of $\text{TiO}_{2}-\text{GO}$ nanohybrids is achieved not by maximizing GO content, but by engineering a finely tuned architecture that enables a synergistic balance between adsorption and photocatalytic efficiency.

31 December 2025 in Revista U.D.C.A Actualidad & Divulgación Científica
Verified
Journal Article
Open access
UMUniversidad Nacional Autónoma de México
Universidad Nacional Autónoma de México
AFAmira Jalil Fragoso-Medina
Amira Jalil Fragoso-Medina
CMCarlos Magaña
Carlos Magaña
AAA. Ashok
A. Ashok
INInstituto Politécnico Nacional
Instituto Politécnico Nacional
RLRicardo Alfredo Luna-Mora
Ricardo Alfredo Luna-Mora
The need for sustainable development in materials technology is becoming increasingly urgent due to the environmental impact largely generated by human activity. One promising way to mitigate this impact is through green syntheses that use alternative energy sources, such as mechanical milling. This method promotes chemical reactions through the mechanical treatment of materials. It is classified either as tribochemical or mechanochemical, depending on whether it acts on all states of aggregation or only on solids, respectively. These techniques offer sustainable options by minimizing both toxic byproducts and energy consumption, and promote waste prevention or reduction. Likewise, the multicomponent reactions, which allow the synthesis of complex molecules in a single step, are addressed. These reactions are especially valuable in pharmaceutical chemistry, as they facilitate the production of compounds with medicinal properties and contribute to greater structural diversity. This paper presents a review of the topics above, analyzing their definition, development, past, current, and future applications, as well as the advantages offered by the synergy between multicomponent reactions and mechanical milling.

23 October 2024
Verified
Conference Paper
Closed access
AAA. Ashok
A. Ashok
DADwight R. Acosta
Dwight R. Acosta
AFAmira Jalil Fragoso-Medina
Amira Jalil Fragoso-Medina
TMT. Merino-Alama
T. Merino-Alama
Odin Reyes VallejoOdin Reyes Vallejo
Odin Reyes Vallejo
MOM. De La L. Olvera
M. De La L. Olvera
In this simulation study, the SCAPS software is used to analyze the Cu(In, Ga)Se2 (CIGSe) thin film solar cells. The parameters, such as thickness, bandgap, and carrier concentration of CIGSe absorber layer, V 2 O 5 buffer window layer and ZnO window layer are investigated to obtain the best device performance. The efficiency of CIGSe thin film solar cells is slightly enhanced by absorbing more photons when the CIGSe thickness increases from 1 to 6µm. The variation of CIGSe bandgap affects all four solar cell parameters, which is directly related to the energy of incident photons. The open circuit voltage and fill factor are dependent on the CIGSe carrier concentration. The optimum values of 3µm, 1.4 eV, and 10 16 cm -3 were thickness, bandgap, and carrier concentrations for CIGSe. A very thick layer of window layers can raise the series resistance and a very thin layer can reduce the shunt resistance of the device. Both of these conditions strongly decreased the fill factor and consecutively the efficiency value. The best thicknesses of 100 and 25 nm were observed for V 2 O 5 and ZnO materials, respectively. The carrier concentrations for the window layer must be higher compared to the absorber layer for improving the device's performance. The optimum efficiency of 14.58 % is found for CIGSe thin film solar cells after using the best parameters of CIGSe, V 2 O 5 , and ZnO. Hence, the SCAPS software is promising for modeling and is imperative to assess the proposed physical structure's practicability and performance.

22 October 2025
Verified
Conference Paper
Closed access
Odin Reyes VallejoOdin Reyes Vallejo
Odin Reyes Vallejo
R M Sanchez-AlboresR M Sanchez-Albores
R M Sanchez-Albores
Francisco Javier CanoFrancisco Javier Cano
Francisco Javier Cano
AAA. Ashok
A. Ashok
Edith Luévano-HipólitoEdith Luévano-Hipólito
Edith Luévano-Hipólito
JPjoseph sebastian Pathiyamattom
joseph sebastian Pathiyamattom
A BiVO4 photocatalyst was synthesized via a green solvothermal method using orange peel extract as a solvent and reducing agent, aimed at photocatalytic hydrogen production and CO2 reduction. The as-synthesized material exhibited a brown coloration and a tendency to float, making it unsuitable for photocatalytic tests; therefore, it was annealed at $350{ }^{\circ} \mathrm{C}$ for 2 hours, which resulted in the characteristic yellow color and improved dispersibility. Structural characterization confirmed the formation of crystalline monoclinic $\text{BiVO}_{4}(\text{XRD})$ with a band gap of approximately 2.46 eV (UV-Vis), consistent with reported values. SEM analysis revealed quasi-spherical agglomerates with increased porosity after annealing due to the removal of organic residues. Photocatalytic tests showed (1) hydrogen production of $568 \mu ~\text{mol} g^{-1}$ after 2 hours under UV illumination, and (2) CO2 reduction yielding oscillating formic acid concentrations between 90 and $180 \mu ~\text{mol}^{-1}$ over 1 hour. The limited CO2 reduction efficiency is attributed to the band alignment of BiVO4, which favors water oxidation over direct CO2 photoreduction. Overall, the green solvothermal synthesis using agricultural wastederived orange peel extract provides an eco-friendly and scalable approach to produce BiVO4 photocatalysts with promising activity for solar-driven hydrogen generation and potential for further optimization in CO2 reduction applications.