When a low-voltage (LV) DC distribution system installation is realised in a public power distribution network, an extensive specification is required to ensure electrical and equipment safety and compatibility between the existing grids and customer-end installations. The goal of the study is to give to a reader an understanding what is required for safe and reliable operation of the LVDC distribution in an actual distribution environment. The study discusses the mechanical and electro-technical aspects of the pilot installation. The focus is on the common system and power electronics specifications.
Multilevel inverter topologies are known for their inherent ability to produce high power quality, yet this can only be achieved with proper control and modulation. In this paper, an improved modulation for a nine-level single-phase inverter called Packed E-Cell Converter is proposed. Previously the topology has been found to suffer from adverse commutation effects during the dead times between the switching operations. This is due to the lack of appropriate freewheeling current paths for certain commutation loops. The proposed modulation strategy allows the elimination of the most severe voltage spikes with an amplitude up to DC link voltage at the zero-crossings of the modulated output voltage. The proposed modulation is simulated and the superior performance is demonstrated in comparison to the original pulse-width modulation.
20 April 2026 in IEEE Transactions on Industrial Electronics
This article presents a comprehensive investigation into the transient inductance of a 27 kW, 100 000 rpm high-speed axially laminated anisotropic synchronous reluctance machine (ALASynRM). While traditional transversally laminated rotor synchronous reluctance machines exhibit significant angular dependence of transient inductance, this study reveals and theoretically quantifies the spatial invariance of this parameter in solid-rotor ALASynRMs due to high-frequency eddy current shielding in the conductive laminate layers. A refined finite element method (FEM) modeling approach is proposed that integrates 3-D end-winding leakage effects and material resistivity sensitivity to overcome the limitations of standard 2-D magnetic analysis. This modeling framework is rigorously validated through experimental measurements on a high-speed prototype, demonstrating a maximum deviation of 6.3% and an average deviation of only 2.5%. The article establishes a novel design-oriented theoretical framework that links the machine’s transient electromagnetic behavior directly to power converter performance. By quantifying the impact of transient inductance on current ripple and total harmonic distortion (THD), a systematic methodology for selecting optimal switching frequencies and DC-link voltages is provided. This approach ensures high-performance operation while accounting for the inherent computational constraints of high-speed motor controllers.
Isolated full-bridge DC-DC converters are being extensively used when power levels of over 100 kWare needed for fast charging of electric vehicles. This paper analyses the efficiencies of two popular unidirectional converter topologies, namely phase-shift full-bridge converter and LLC converter that utilize silicon carbide semiconductors. Efficiencies of the converters at partial load and various input-output voltage levels are evaluated by by simulations in Plexim PLECS. The results show that the designed phase-shift full-bridge converter has higher efficiency than the LLC converter when high boost ratio is required, whereas the LLC converter has higher efficiency near the nominal operating voltages.