The main goal of this study was the analysis of gas flow in the underground coal gasification process and interactions with the surrounding rock mass. The article is a discussion of the assumptions for the geometric model and for the numerical method for its solution as well as assumptions for modelling the geochemical model of the interaction between gas-rock-water, in terms of equilibrium calculations, chemical and gas flow modelling in porous mediums. Ansys-Fluent software was used to describe the underground coal gasification process (UCG). The numerical solution was compared with experimental data. The PHREEQC program was used to describe the chemical reaction between the gaseous products of the UCG process and the rock strata in the presence of reservoir waters.
Coal gasification is a complex process of parallel-consecutive chemical reactions at high temperature between the organic part of coal matter and the gasifying agent. The following two approaches are applied in modelling the coal gasification process: equilibrium and kinetic. The methods of determining the thermodynamic equilibrium can be divided into two groups: stoichiometric and non-stoichiometric methods. This article presents the equilibrium model of the steam gasification of coal developed for a laboratory experiment (Smoliński 2008, 2011). The scope of this paper includes the development of the concept concerning the division of the reaction system into two zones, where the result of one of the stages constitutes the input data for the subsequent stage. The composition of the gas mixture has been evaluated on the basis of the fundamental physical and chemical rights. The estimated content of the gases in the mixture correlate with the results of the experiment.
The purpose of this paper is to examine the possibility of reduction of free calcium oxide content in waste from fluidized bed boilers by treating them with carbon dioxide under various conditions. The primary examination concerning the possibilities of reducing the content of free calcium oxide in waste included carbonation process in a laboratory, taking into account various parameters of the process. The primary examination has been carried out in a fluidized bed reactor, rotary reactor and a ball mill reactor.Depending on the reaction process, the variables in the examined processes included: reaction time, temperature, amount of the catalyst (water), application of an abrasive material. After completion of the process, the treated material was tested with regard to the content of free calcium oxide. Thus, it was possible to determine the most optimal conditions for treatment of combustion products from fluidized bed boilers, that is the conditions which will ensure reduction of the content of free calcium oxide at an appropriate level, under the physical conditions most similar to normal conditions and in the shortest possible time
The results of model studies involving numerical simulation of underground coal gasification process are presented. For the purpose of the study, the software of computational fluid dynamics (CFD) was selected for simulation of underground coal gasification. Based on the review of the literature, it was decided that ANSYS-Fluent will be used as software for the performance of model studies. The ANSYS- -Fluent software was used for numerical calculations in order to identify the distribution of changes in the concentration of syngas components as a function of duration of coal gasification process. The nature of the calculations was predictive. A geometric model has been developed based on construction data of the georeactor used during the researches in Experimental Mine “Barbara” and Coal Mine “Wieczorek” and it was prepared by generating a numerical grid. Data concerning the georeactor power supply method and the parameters maintained during the process used to define the numerical model. Some part of data was supplemented based on the literature sources. The main assumption was to base the simulation of the georeactor operation on a mathematical models describing reactive fluid flow. Components of the process gas and the gasification agent move along the gasification channel and simulate physicochemical phenomena associated with the transfer of mass and energy as well as chemical reactions (together with the energy effect). Chemical reactions of the gasification process are based on a kinetic equation which determines the course of a particular type of equation of chemical coal gasification. The interaction of gas with the surrounding coal layer has also been described as a part of the model. The description concerned the transport of thermal energy. The coal seam and the mass rock are treated as a homogeneous body. Modelling studies assumed the coal gasification process is carried out with the participation of separately oxygen and air as a gasification agent, under the specific conditions of the georeactor operations within the time interval of 100 hours and 305 hours. The results of the numerical solution have been compared with the results of experimental results under in-situ conditions.