29 June 2020 in Nature Nanotechnology
The development of infrared photodetectors is mainly limited by the choice of available materials and the intricate crystal growth process. Moreover, thermally activated carriers in traditional III–V and II–VI semiconductors enforce low operating temperatures in the infrared photodetectors. Here we demonstrate infrared photodetection enabled by interlayer excitons (ILEs) generated between tungsten and hafnium disulfide, WS2/HfS2. The photodetector operates at room temperature and shows an even higher performance at higher temperatures owing to the large exciton binding energy and phonon-assisted optical transition. The unique band alignment in the WS2/HfS2 heterostructure allows interlayer bandgap tuning from the mid- to long-wave infrared spectrum. We postulate that the sizeable charge delocalization and ILE accumulation at the interface result in a greatly enhanced oscillator strength of the ILEs and a high responsivity of the photodetector. The sensitivity of ILEs to the thickness of two-dimensional materials and the external field provides an excellent platform to realize robust tunable room temperature infrared photodetectors.
13 June 2023 in IEEE Electron Device Letters
A probabilistic bit (p-bit) is the fundamental building block in the circuit of probabilistic computing (PC), and it produces a random binary bitstream with tunable probability. Utilizing the randomness induced by thermal noise-induced lattice vibration in the ferroelectric (FE) material, we propose the p-bits based on stochastic ferroelectric FET (FeFET). The domain dynamic is revealed to play crucial roles in FE p-bits’ stochasticity, as the domain coupling suppresses the dipole fluctuation. The proposed FE p-bits possess the advantages of both extremely low hardware cost and scalability for p-bit circuitry, rendering it a promising candidate for PC.
2 May 2024 in npj Computational Materials
Protected surface states arising from non-trivial bandstructure topology in semimetals can potentially enable advanced device functionalities in compute, memory, interconnect, sensing, and communication. This necessitates a fundamental understanding of surface-state transport in nanoscale topological semimetals. Here, we investigate quantum transport in a prototypical topological semimetal NbAs to evaluate the potential of this class of materials for beyond-Cu interconnects in highly-scaled integrated circuits. Using density functional theory (DFT) coupled with non-equilibrium Green’s function (NEGF) calculations, we show that the resistance-area RA product in NbAs films decreases with decreasing thickness at the nanometer scale, in contrast to a nearly constant RA product in ideal Cu films. This anomalous scaling originates from the disproportionately large number of surface conduction states which dominate the ballistic conductance by up to 70% in NbAs thin films. We also show that this favorable RA scaling persists even in the presence of surface defects, in contrast to RA sharply increasing with reducing thickness for films of conventional metals, such as Cu, in the presence of surface defects. These results underscore the potential of topological semimetals as future back-end-of-line (BEOL) interconnect metals.
8 December 2017 in Journal of Applied Physics
A heavily Ga-doped Ge0.95Sn0.05 layer was grown on the Ge (100) substrate by molecular beam epitaxy (MBE), achieving an active doping concentration of 1.6 × 1020 cm−3 without the use of ion implantation and high temperature annealing that could cause Sn precipitation or surface segregation. An advanced nano-scale transfer length method was used to extract the specific contact resistivity ρc between the metal and the heavily doped p-Ge0.95Sn0.05 layer. By incorporating Sn into Ge and in-situ Ga doping during the MBE growth, an ultra-low ρc of 1.4 × 10−9 Ω·cm2 was achieved, which is 50% lower than the ρc of p+-Ge control and is also the lowest value obtained for metal/p-type semiconductor contacts.
17 November 2021 in IEEE Electron Device Letters
Overcoming the drawbacks of the existing ferroelectric tunnel junction (FTJ) models which ignore the dynamic or multi-domain switching behaviors, we develop a more comprehensive FTJ model by combining the Time-Dependent Landau-Ginzburg (TDLG) equations to solve the multi-domain dynamic switching of ferroelectric layer and the Non-Equilibrium Green Function (NEGF) to solve the tunneling current. The model successfully reproduces the experimental results of our fabricated metal-ferroelectrics-insulator-semiconductor (MFIS) FTJ. This model empowers us to predict both the dynamic and multi-state switching of FTJ, showing its promise for applications in the high-density data storage and analog computing.
26 June 2006 in Applied Physics Letters
Double-side superconducting films have been grown on double-side polished sapphire substrates by using hybrid physical-chemical vapor deposition method. The zero resistance temperatures and the critical current densities have been achieved for both sides. In the first microstrip resonator fabricated by a double-side film, an unloaded value of 3400 at was obtained corresponding to surface resistance of for the interface. By simply using a sapphire substrate with two polished holes, superconducting connection has been achieved for the double-side film. The results show potential applications for the superconducting films in microwave and electronic devices.