In this report, we study the Yttrium-doped Barium Titanate (Y-BT) Ba1 − xYxTiO3 (with x = 0.00, 0.01, 0.03, 0.05, 0.07 mmol) perovskite ceramics synthesized by sol-gel method. The as-made powder samples were pressed into a pellet shape and subsequently sintered at 1300 °C for 5 h in air. The structural, morphological, electrical, and optical properties of the synthesized samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), impedance analyzer, and UV-Vis-NIR Spectroscopy respectively. The XRD study revealed the formations of single phase tetragonal structure of Barium Titanate (BT) with ∼23–33 nm mean crystallite size. The crystallite size increases initially with Y-doping, found at about 33 nm for x = 0.01, and reduces for increase in Y3+ concentration further. The microstructural study from FESEM depicts the uniform distribution of compact and well-faceted grain growth for Y-BT in contrast with undoped barium titanate. The average grain size (∼0.29–0.78 μm) of the Y-BT decreases with increasing doping concentration. Frequency-dependent impedance analyses show enhanced dielectric properties like dielectric constant, quality factor, and conductivity with low dielectric loss in the presence of Yttrium. The optical bandgap energy (∼2.63–3.72 eV) estimated from UV-Vis-NIR diffuse reflection data shows an increasing trend with a higher concentration of yttrium doping.
In this study, Psidium guajava ( P. guajava ) leaf extract-assisted silver nanoparticles (AgNPs) were synthesized and their antibacterial activities were investigated.
In this study, magnetite nanoparticles (Fe3O4 NPs) were synthesized using Baccaurea ramiflora leaf extracts and characterized by visual observation, UV–Vis, FTIR, XRD, FESEM, and EDS. The UV−Vis spectrum showed continuous absorption at 300–500 nm, confirming the formation of Fe3O4 NPs. FTIR revealed that compounds containing the O-H group act as reducing agents during Fe3O4 NPs formation. Agglomerated spherical NPs were observed in the FESEM image. The prominent peak at ~6.4 keV in the EDS spectrum ascertained the existence of Fe, while the sharp peak at ~0.53 keV confirmed the presence of elemental oxygen. XRD patterns affirmed the crystalline nature. The size of as-synthesized NPs was observed to be 8.83 nm. The catalytic activity of Fe3O4 NPs for the reduction of methylene blue (MB) dye was monitored by UV–Vis. The maximum absorption peak of MB dye at 664 nm was almost diminished within 20 min, which revealed Fe3O4 NPs could be an excellent catalyst for wastewater treatment.
The present work includes the fabrication of pure BiFeO3 and Bi0.9Y0.1Fe1−xCuxO3 (x = 0.05, 0.10, 0.15) nanoparticles by the usual sol-gel route. The characterization of structural, morphological, optical, electrical, and magnetic properties of the synthesized samples was achieved through x-ray diffraction spectroscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, an impedance analyzer, and a vibrating sample magnetometer. The Fourier transform infrared study confirmed the presence of Bi–O and Fe–O bonds. The x-ray diffraction patterns confirmed the rhombohedral (R3c) structure as a major phase with the orthorhombic (Pnma) structure as a secondary phase in all samples, and few amount of impurity phase of Bi25FeO40 was also determined. The surface morphology analysis showed the variation of particle size from 63 to 174 nm. The Raman spectra of 13 optical phonon modes, including 4A1 and 9E symmetric phonons, are observed for all samples, and the positions of these modes are almost similar, except the intensities of A1 modes. The optical measurements show a reduction in bandgap from 2.17 to 2.03 eV with co-doping, revealing itself as a more promising applicant in photovoltaics. An enhanced value of the dielectric constant is observed for different doped samples at different frequency regions from 100 Hz to 10 MHz. Magnetic investigation demonstrates the improved ferromagnetism with co-doping of Y and Cu due to distortion in the FeO6 octahedron. A maximum saturation magnetization of 0.26 emu/gm and a coercivity of 2915 Oe were found for Y concentration of 10% and Cu concentration of 15%.