More people prefer to using rail traffic for travel or for commuting due to its convenience and flexibility. As the record of the maximum speed of rail has been continuously broken and new applications are foreseen, the high-speed railway (HSR) communication system requires higher data rate with seamless connectivity, and therefore, the system design faces new challenges to support high mobility. Millimeter-wave (mmWave) technologies are considered as candidates to provide wideband communication. However, mmWave is rarely explored in HSR scenarios. In this paper, channel characteristics are studied in the 5G mmWave band for typical HSR scenarios, including urban, rural, and tunnel, with straight and curved route shapes. Based on the wideband measurements conducted in the tunnel scenario by using the ''mobile hotspot network'' system, a 3-D ray tracer (RT) is calibrated and validated to explore more channel characteristics in different HSR scenarios. Through extensive RT simulations with 500-MHz bandwidth centered at 25.25 GHz, the power contributions of the multipath components are studied, and the dominant reflection orders are determined for each scenario. Path loss is analyzed, and the breakpoint is observed. Other key parameters, such as Doppler shifts, coherence time, polarization ratios, and so on, are studied. Suggestions on symbol rate, sub-frame bandwidth, and polarization configuration are provided to guide the 5G mmWave communication system design in typical HSR scenarios.
18 January 2018 in IEEE Transactions on Vehicular Technology
This paper presents a geometry-based stochastic channel model for a 3GPP millimeter-wave (mmWave) high-speed train (HST) scenario. An important demand of the mmWave HST channel model is the spatial consistency during movement. In order to meet this requirement, the environment pattern containing the most effective geometry information is proposed, which is useful for generating integral and accurate channel geometry. Since the measurement of a mmWave channel is deficient for high mobility, the proposed channel model is developed using a ray-tracing (RT) simulator that is validated with the channel measurements performed in the HST scenario at 93.2 GHz. The paper gives a full parameterization for the proposed model and its implementation for channel simulation. The verification is made through a comparison of the proposed model and the measurement-validated RT simulations in terms of the power delay profile (PDP), the Ricean K-factor and the second-order statistics in the delay and angle domains. Finally, for the design of mmWave HST communication systems the time-varying channel characteristics are evaluated in the delay and Doppler domains.
With the challenge to form the networks of the Intelligent Transportation Systems (ITS), both technologies of vehicles and wireless communication are required to be connected tightly. In terms of wireless communication, the communication system in the terahertz (THz) frequency range with ultra-large bandwidth is a potential technology to support very high-data-rate wireless transmission at the age of beyond fifth-generation mobile communications (B5G). In this paper, the carrier frequency of 300 GHz with 8 GHz bandwidth vehicle-to-infrastructure (V2I) channel is characterized for the urban and highway scenario, respectively. The self-developed ray-tracing (RT) simulator is employed with the calibrated electromagnetic (EM) parameters. Since the wavelength of carrier frequency approaches the diameters of raindrops and snowflakes, the significant influence of the precipitation on the channel characterization is studied in our work as well. The large-scale parameters of the THz V2I channel, including path loss, Rician $K$ -factor, root-mean-square (RMS) delay spread, and angular spreads are explored in the target scenarios under sunny, rainy, and snowy conditions, respectively. The channel characteristics studied in this paper can be used to support the link-level and system-level design for the future THz vehicular communications.
17 August 2018 in IEEE Transactions on Vehicular Technology
This paper presents a comprehensive study on millimeter wave (mmWave)-based mobile hotspot network (MHN) system for high-speed train (HST) communications, including system design, field trial, channel modeling based on measurement campaign, simulation and validation. Firstly, an overview of the MHN system and the design of MHN enhanced (MHN-E) system including physical layer specification and single frequency network (SFN) are provided. Secondly, the overall design of prototypes for MHN conventional (MHN-C) and MHN-E systems are presented, and then the recent experimental results of a field trial conducted at Seoul subway line 8 with the MHN-C prototype and demonstrations with the MHN-E prototype are analyzed. Thirdly, the paper presents a measurement campaign investigating channel characteristics of a rural HST environment and a QuaDRiGa-based channel model developed based on the parameters extracted from the measurements. Lastly, a computer simulation is conducted to validate the performance of the MHN-E system at high-mobility of up to 500 km/h under the QuaDRiGa channel model, which suggests a good methodology for the validation of HST communication systems at the high-mobility since it is impractical to be tested by real testbeds as of now. The simulation results revealed that the MHN-E system is capable of providing a broadband mobile wireless backhaul (MWB) with a peak data rate exceeding 5 Gbps at a speed of 500 km/h.
29 September 2022 in IEEE Transactions on Vehicular Technology
This paper presents a study conducted for the feasibility validation of a remote driving application, which is one of the use cases of 5 G Vehicle-to-everything (V2X), over millimeter-wave (mmWave) 5 G New Radio (NR) vehicular communications. First, the overall network architecture of a typical mmWave 5 G NR communication system and design details of essential system components for remote driving applications are provided. Then, we discuss key technologies, including beam switching, automatic gain control, uplink transmit power control, and hybrid automatic repeat request with soft combining, enabling the system to offer reliable communication links for remote driving support. Lastly, we describe the implementation and deployment of testbeds and provide the experimental results obtained from field trials. The field trial results reveal that leveraged by the key enabling technologies and mmWave providing a wider spectrum and shortened latency, the mmWave 5 G NR vehicular communication system has the capability to provide broadband, reliable, and low-latency communication links for the realization of remote driving applications, which eventually paves the road towards expanding the applicability of mmWave communication systems.
Sixth generation will exploit satellite, aerial, and terrestrial platforms jointly to improve radio access capability and unlock the support of on‐demand edge cloud services in three‐dimensional (3D)...