25 December 2023 in IEEE Transactions on Power Electronics
This research introduces a unique bidirectional dc–dc converter specifically developed for energy storage applications. The proposed circuit topology exhibits a high voltage conversion ratio and a reduced current ripple. On the transformer primary side, a quasi-switched-capacitor (QSC) circuit mitigates voltage stress on switching devices and achieves a 3:1 voltage step-down ratio. The proposed transformer-interleaved circuit on the secondary side features the 2:1 voltage conversion ratio and minimizes the battery current ripple without adding extra switching or magnetic components. The 6:1 voltage conversion contributes to a simpler winding structure, smaller transformer size, and lower transformer loss in high voltage gain application. Furthermore, the reduced current ripple leads to lower battery heat generation and smaller filter bank capacitance, making it suitable for high-density design. The implementation of phase shift control, similar to the dual-active-bridge circuit, serves to regulate the circuit's transferred power. A 1-kW, 300-kHz, 380–420-/20–33-V GaN-based circuit prototype is developed and tested. The tested peak efficiency is 98.5% with a power density of 30.42 W/in 3 .
17 February 2026 in IEEE Transactions on Power Electronics
A power transmission and energy storage system are essential to support the microgrid at the Moon's South Pole. Key challenges include minimizing system mass and ensuring survivability under extreme lunar conditions, specifically: (1) radiation hardness, (2) vacuum compatibility, and (3) cryogenic operation. This study proposes a 3-km, 1.5-kV, 1.5-kW DC power transmission and conversion system employing two modular multilevel converter (MMC)-based bidirectional high-gain isolated DC/DC converters, with multi-winding high-frequency transformers, for voltage step-up and step-down operation. These converters achieve a high voltage conversion ratio and exhibit low device voltage stress, which mitigates ion-radiation-induced single-event burnout (SEB) in Gallium Nitride (GaN) devices. Furthermore, operating the transformer at low voltage and high frequency reduces its size and mass. This paper presents the selection and evaluation of key components under lunar environmental constraints, and discusses gate driver and transformer design. To ensure thermal performance under vacuum condition, the system employs radiation-based cooling to offset the lack of air convection. The converters have been validated under full voltage and power in vacuum and cryogenic conditions. The total system mass including the power conversion, energy storage and 3-km transmission lines remains below 150 kg.
1 November 2026 in IEEE Transactions on Power Electronics
16 February 2026 in IEEE Transactions on Power Electronics
With the accelerating advancement of electric vehicles, electric aircraft, unmanned aerial vehicles, and artificial intelligence, the demand for innovative liquid-cooling-based thermal management systems for high-power-density electric and electronic systems is paramount. Conventional cooling systems, typically designed separately from the circuitry, result in inefficiencies, bulky configurations, high acoustic noise, and reliability concerns associated with rotary pumps. This work introduces an integrated design paradigm that unifies electrical and cooling systems by employing circuit components as both functional elements of the electric circuit and magnetohydrodynamic (MHD) pumps for liquid metal, such as the non-toxic gallium alloy. This approach substantially enhances cooling efficiency, delivers load based self-adaptive cooling performance, and eliminates noisy and often unreliable rotary pumps. Moreover, the exceptional thermal conductivity of liquid metal relaxes the design requirements for cold plates and radiators. Prototypes of the proposed approach have demonstrated that remarkable power density can be achieved in a three-phase inverter with a self-adaptive and highly efficient integrated liquid cooling system. These innovations not only improve performance but also streamline the design process, potentially transforming cooling strategies for electric circuits across multiple industries.