22 April 2024 in Applied Physics Letters
We report the direct observation of radio-frequency negative differential resistance, via on-wafer S-parameter measurements, in GaN-based impact ionization avalanche transit time (IMPATT) diodes. Clear signatures of reflection gain are observed from 18.7 to 30.6 GHz. These observations have been made possible by suppressing the reverse leakage current (and thereby parasitic shunt conductance) by optimization of the fabrication process, in conjunction with the use of pulsed measurements to suppress device self-heating. Consistent with avalanche-dominated behavior, the measured DC reverse bias current–voltage measurements show a positive temperature coefficient of breakdown. For the high-frequency on-wafer characterization, pulsed-bias S-parameter measurements with low (0.0067%) duty cycle were used to mitigate thermal effects. The measured avalanche frequency aligns closely with theoretical predictions based on Gilden and Hines' small signal model [Gilden and Hines, IEEE Trans. Electron Devices ED-13(1), 169–175 (1966)], measured impact ionization coefficients [Cao et al., Appl. Phys. Lett. 112(26), 262103 (2018)], and experimental saturation velocity measurements [Bajaj et al., Appl. Phys. Lett. 107(15), 153504 (2015)]; this excellent agreement confirms IMPATT operation and provides insights needed to further optimize device performance.
1 November 2026 in IEEE Transactions on Semiconductor Manufacturing
9 April 2026 in IEEE Transactions on Components, Packaging and Manufacturing Technology
The design, fabrication, and characterization of novel D-band power dividers in both Y- and T-junction configurations, using substrate integrated waveguide (SIW) technology fabricated on a 100-μm thick 4H-SiC substrates, are reported. The three-port S-parameters of the fabricated dividers were measured and calibrated on-wafer, achieving an excess loss as low as 0.68 ± 0.10 dB and an average return loss of up to 25 dB across full D-band. This is, to the best of our knowledge, the first demonstration of a SiC-based SIW power divider at D-band, offering excellent performance and compatibility with GaN-on-SiC MMIC fabrication processes.
13 July 2026 in Applied Physics Letters
We demonstrate plasma-assisted MBE selective-area growth (SAG) of GaN/AlGaN core–shell structures on Si(111) as a path to vertical GaN devices. The SAG enables the full vertical and uniform core–shell fin structures to be realized in a continuous growth without breaking vacuum. TEM images and energy dispersive spectroscopy mapping of the core–shell structures show well-aligned crystal structures and sharp heterointerfaces. Dislocation filtering was observed in STEM imaging of the fin structure. p–n junction diodes fabricated with GaN/AlGaN core–shell structures reveal ideality factors as low as 1.5, and the reverse-bias leakage is consistent with trap-assisted space-charge-limited conduction. While practical challenges exist, including material-related leakage, growth-related challenges, and optimization, this demonstration of the p–n junction by this method may provide a path to vertical superjunction device concepts in GaN and related materials.