10 February 2025 in IEEE Transactions on Microwave Theory and Techniques
Conventional power combiners based on microstrip or coplanar transmission lines are hindered by high loss above 110 GHz. By contrast, power combiners based on substrate-integrated waveguides (SIWs) can have low loss, high-power capacity, and minimum crosstalk at the same frequencies. Recently, we demonstrated a D-band (110–170 GHz) distributed amplifier by embedding transistors in the middle of an SIW as voltage probes. The voltage probes are realized through hot through-substrate vias (TSVs), which are not supported by all semiconductor foundries. As an alternative, this work embeds transistors along the sidewalls of an SIW as current probes through standard TSVs grounded to the backside metal layer. The new approach combines twice as many transistors per unit length of the SIW without requiring either hot TSVs or interconnects from the sidewalls to the middle of the SIW. This results in order-of-magnitude improvement in the power amplifier. For example, the measured output power of the new distributed amplifier at 145 GHz is 24 dBm with an associated power added efficiency of 9%, making its performance approaching state-of-the-art InP and SiGe D-band power amplifiers. Since the innovative power-combing approach is material agnostic and device agnostic, it can also be used to improve the performance of InP and SiGe power amplifiers above 110 GHz.
3 February 2025 in IEEE Transactions on Terahertz Science and Technology
We report the first experimental demonstration of an alternative approach for achieving integrated broadband terahertz (THz) switching functionality, based on photoconductivity modulation in thin film Si on low-loss sapphire substrates. By employing a silicon thin film mesa (14×14 μm²) on a Silicon-on-Sapphire (SoS) substrate (with 1.5-μm-thick silicon and 600-μm-thick sapphire), an optically-controlled THz switch integrated with low-loss CPW transmission lines operating from 110 GHz to 220 GHz has been designed, fabricated, and characterized. To control the switch in this prototype demonstration, a 915 nm laser diode was used to illuminate the silicon mesa through an optical fiber. The switch performance was measured on-wafer in both D- and G-band; an average on-state insertion loss of ∼3.5 dB (with minimum insertion loss of 2.5 and 1.8 dB at 160 and 200 GHz), and an off-state isolation greater than 20 dB across the entire frequency range have been achieved. This performance can be further greatly improved, and is comparable to or better than competing approaches, with the advantage that this approach allows seamless integration of the switch with passive components on low-loss sapphire substrates. This makes the reported approach promising for developing high-performance and compact THz switches for next-generation adaptive circuits and systems.
1 November 2026 in IEEE Transactions on Semiconductor Manufacturing
13 July 2026 in Applied Physics Letters
We demonstrate plasma-assisted MBE selective-area growth (SAG) of GaN/AlGaN core–shell structures on Si(111) as a path to vertical GaN devices. The SAG enables the full vertical and uniform core–shell fin structures to be realized in a continuous growth without breaking vacuum. TEM images and energy dispersive spectroscopy mapping of the core–shell structures show well-aligned crystal structures and sharp heterointerfaces. Dislocation filtering was observed in STEM imaging of the fin structure. p–n junction diodes fabricated with GaN/AlGaN core–shell structures reveal ideality factors as low as 1.5, and the reverse-bias leakage is consistent with trap-assisted space-charge-limited conduction. While practical challenges exist, including material-related leakage, growth-related challenges, and optimization, this demonstration of the p–n junction by this method may provide a path to vertical superjunction device concepts in GaN and related materials.
9 April 2026 in IEEE Transactions on Components, Packaging and Manufacturing Technology
The design, fabrication, and characterization of novel D-band power dividers in both Y- and T-junction configurations, using substrate integrated waveguide (SIW) technology fabricated on a 100-μm thick 4H-SiC substrates, are reported. The three-port S-parameters of the fabricated dividers were measured and calibrated on-wafer, achieving an excess loss as low as 0.68 ± 0.10 dB and an average return loss of up to 25 dB across full D-band. This is, to the best of our knowledge, the first demonstration of a SiC-based SIW power divider at D-band, offering excellent performance and compatibility with GaN-on-SiC MMIC fabrication processes.