19 June 2019 in Plasmonics
10 December 2019 in Advanced Optical Materials
30 March 2020 in Optics Letters
ASAndriy E. Serebryannikov
In this Letter, we numerically propose the one-way perfect absorption of near-infrared radiation in a tunable spectral range with high transmission in the neighboring spectral ranges. This functionality is obtained by using a two-dimensional, guided-mode resonance-based grating-waveguide metasurface that acts as a frequency-selective reflector, a spacer dielectric, and an absorbing oxide layer. Within the bandwidth of the excited guided-mode resonance excited at 1.82 µm (with a full-width at half-maximum of 19 nm), we confirmed perfect absorption when light was incident from one of the two opposite directions, whereas in the other direction, perfect reflection was observed. The forward-to-backward absorption ratio reached as high as 60, while the thickness of the entire structure was on the order of the operating wavelength. In addition to the spectral tunability of the excited resonances and their bandwidths, our proposed device supports transparency windows with 65% transmission in the adjacent frequency bands. Our 2D grating is also verified to enable near-absolute insensitivity to the polarization state of incident light. Geometrical parameter modification also gives our design great tunability, as we also designed a device with a 300 nm absorption/reflection linewidth.
18 April 2020 in Physica Status Solidi (RRL) – Rapid Research Letters
23 February 2022 in Journal of Applied Physics
High electron mobility transistors (HEMTs) based on gallium nitride (GaN) with a wide range of application potentials need to be rigorously examined for reliability to take advantage of their intrinsically extraordinary properties. The most vital parameter of the reliability, the hotspot, or Tmax, resides in the two-dimensional electron gas (2DEG) temperature profile inside the device where optical access is often restricted. The device surface temperature can be measured by widespread IR thermography with the limitation of diffraction-based IR transmission losses. However, Tmax on the sub-surface cannot be reached thermographically. Although finite element analysis (FEA)-based thermal simulations can easily reveal the 2DEG temperature profile, accuracy is tightly dependent on the realistic modeling of material/structure parameters. Because these parameters are rather sensitive to fabrication and processing, it is quite difficult to specify them accurately. To overcome these drawbacks, a method integrating both IR thermography and FEA thermal analysis is demonstrated on a fabricated high-power 40 × 360 μm packaged GaN HEMT as a proof-of-concept. Utilizing the simulation and measurement temperature profiles, a correlation algorithm is developed so that accuracy of the FEA thermal simulation is improved by calibrating the parameters specific to fabrication/process conditions by thermographic measurement. Then, it is quantitatively shown that the proposed method is able to find the 2DEG temperature profile and Tmax with an accuracy that best suits the intrinsic and extrinsic characteristics of the device under test. The method sheds light on GaN reliability engineering by providing a feasible and reliable alternative to realistically reveal hotspot information for device lifetime assessments.
31 August 2023 in Journal of Physics D: Applied Physics
TGTurkan Gamze Ulusoy Ghobadi
Turkan Gamze Ulusoy Ghobadi
In this paper, a large-scale compatible plasmonic nanocavity design platform is utilized to achieve a nearly order of magnitude photoluminescence (PL) enhancement. The proposed design is made of multi-sized/multi-spacing gold (Au) nanounits that are uniformly wrapped with a thin aluminum oxide (Al2O3) layer, as a foreign host to form a metal–insulator–semiconductor cavity, as they are coated with semiconductor quantum dots (QDs). Our numerical and experimental data demonstrate that, in an optimal insulator layer thickness, the simultaneous formation of broadband Fabry–Perot resonances and plasmonic hot spots leads to enhanced light absorption within the QD unit. This improvement in absorption response leads to the PL enhancement of QDs. This work demonstrates the potential and effectiveness of a random plasmonic nanocavities host in the realization of lithography-free efficient emitters.