NANO-ElecTronic Centre (NET), School of Electrical Engineering, College of Engineering, Universiti Teknologi MARA, 40450, Shah Alam, Selangor, Malaysia
Auto-generated profile, based on publicly available information
Norfarariyanti Parimon
NANO-ElecTronic Centre (NET), School of Electrical Engineering, College of Engineering, Universiti Teknologi MARA, 40450, Shah Alam, Selangor, Malaysia
Manganese-doped nickel oxide nanosheet array films are successfully prepared on a nickel oxide seed-coated glass substrate by an immersion method. Various annealing temperatures between 300°C and 500°C are applied to the manganese-doped nickel oxide nanosheet array films to study their effect on the properties of nickel oxide, including humidity sensing performance. Field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), ultraviolet–visible (UV–vis) spectrophotometry, a two-probe current–voltage (I-V) measurement system and a humidity measurement system are used to characterise the heat-treated manganese-doped nickel oxide samples. The effect of annealing temperature can be clearly observed for the different surface morphologies and diffraction patterns. The samples exhibit average crystallite size increases of 0.63–10.13 nm with increasing annealing temperature. The dislocation density, interplanar spacing, lattice parameter, unit cell volume and stress/strain are also determined from the XRD data. The average transmittances in the visible region for all samples show low percentages with the highest transparency of 50.7% recorded for manganese-doped nickel oxide annealed at 500°C. The optical band gap shows a decreasing trend with increasing annealing temperature. The I-V measurement results reveal that manganese-doped nickel oxide displays improved conductivity values with increasing annealing temperature. The sensitivity of the humidity sensors shows an ascending curve with increasing temperature. The optimal device performance is obtained with annealing at 500°C, with the highest sensitivity of 270 and the fastest response and recovery times. In contrast, the sample for annealing at 300°C shows poor sensing performance.
The design and RF characteristics of planar dipole antenna facilitated with coplanar waveguide structure was presented. The dipole antennas were fabricated on semi-insulated GaAs substrates by using standard photolithography and lift-off process. As expected, it can be seen that the fundamental resonant frequency shift to higher frequency when the length of antenna decreases. Interestingly, the resonant frequencies of antenna are almost unchanged with the variation of antenna width and metal thickness. The width of dipole antenna and metal thickness only has an effect on the magnitude of return loss where the magnitude increases to more negative value with the increase of width and decrease of metal thickness. One of the most promising applications of our proposed dipole antenna is the capability to be integrated directly with AlGaAs/GaAs Schottky diode without any insertion of matching circuit between them.
The novel hematite (alpha-Fe2O3)/nickel oxide (NiO) heterostructures were grown on fluorine-doped tin oxide (FTO) coated glass substrates at various deposited NiO of 3, 5, and 7 layers. The heterostructures were successfully synthesized using the immersion and sol-gel spin coating methods for alpha-Fe2O3 and NiO films, respectively. The field emission scanning electron microscopy analysis showed that each sample of alpha-Fe2O3/NiO heterostructures has a unique surface morphology when deposited with different NiO layers. The X-ray diffraction pattern shows that the number of NiO layers affected the diffraction peaks. The NiO diffraction peak intensity at (111) plane increased when the deposition number of NiO layer was increased. The crystallite sizes of NiO were 35.4, 33.6, and 38.0 nm for 3-, 5-, and 7-layer NiO, respectively. The interplanar spacing, lattice parameter, and unit cell volume indicate NiO with 3-layer as the highest, while 5- and 7-layer had the same values. Meanwhile, the strain and stress values show the compressive strain and tensile stress, respectively. The optical properties reveal that the highest transmittance and the lowest absorbance percentages were recorded for a 3-layer NiO sample. In contrast, the lowest transmittance and the highest absorbance percentages were obtained for the sample with 5-layer NiO. Different thicknesses and morphologies of heterostructures explained these situations. In addition, each unique heterostructure of alpha-Fe2O3/NiO with high visible light absorption nature is perceived to reduce the bandgap energy and has the potential to be used in sensor and solar cell applications.