14 March 2023 in Advanced Materials
Perovskite photovoltaics have shown great promise in device efficiency but also the promise of scalability through solution‐processed manufacture. Efforts to scale perovskites have been taken through printable mesoporous scaffolds and slot die coating of flexible substrates roll‐to‐roll (R2R). However, to date there has been no demonstration of entirely R2R‐coated devices due to the lack of a compatible solution‐processable back electrode; instead, high‐value evaporated metal contacts are employed as a post process. Here, in this study, the combination of a low‐temperature device structure and R2R‐compatible solution formulations is employed to make a fully R2R printable device architecture overcoming interlayer incompatibilities and recombination losses. Therefore, the n–i–p device structure of SnO2/perovskite/poly(3,4‐ethylenedioxythiophene)/carbon is employed to form an ohmic contact between a p‐type semiconductor and printable carbon electrode. In particular, the results show that the small‐scale device efficiencies of 13–14% are achieved, matching the device performance of evaporated gold electrodes. Also, this entirely R2R‐coated perovskite prototype represents a game changer, reaching over 10% (10.8) stabilized power conversion efficiency with unencapsulated long‐term stability retaining 84% of its original efficiency over 1000 h under 70% RH and 25 °C.
4 May 2020 in Sustainable Energy & Fuels
Roll-to-roll coating of all active layers is demonstrated for a P–I–N perovskite solar cell stack, using a single step perovskite ink with an acetonitrile solvent system and flexible plastic substrate.
11 March 2021 in Green Chemistry
CCCatherine S. P. De Castro
Catherine S. P. De Castro
RRRodrigo Garcia Rodriguez
+4
Perovskite solar cells have emerged as a promising and highly efficient solar technology. Despite efficiencies continuing to climb, the prospect of industrial manufacture is in part hampered by concerns regarding the safety and sustainability of the solvents used in lab scale manufacture. In this paper, we aim to present a methodology for green solvent selection informed by EHS considerations from the CHEM-21 solvent guide for successful methylammonium lead triiodide (MAPbI3) precursor dissolution. Through the use of this methodology we present a N,N-dimethylformamide (DMF)-free alternative solvent system for deposition of MAPbI3 precursors (MAI and PbI2) consisting of dimethyl sulfoxide (DMSO), dimethylpropyleneurea (DMPU), 2-methyltetrahydrofuran (2-MeTHF) and ethanol (EtOH). We have investigated 3 candidate solutions with slightly different compositions of these four solvents, all of which produce dense, uniform and pinhole-free perovskite films via spin coating. All three candidate solutions (A–C) match the average device efficiencies of the DMF/DMSO control devices (12.4%) with candidate A, which consists of 40% DMSO, 30% DMPU, 20% 2-MeTHF and 10% EtOH (vol%), producing a champion PCE of 16.1% compared to 16.2% for DMF/DMSO (80/20 vol%). Perovskite films cast from the three candidate solutions show improved crystallinity, higher fluorescence emission, and improved crystal size uniformity than those cast from DMF/DMSO. This work aims to: highlight the key solvent parameters which determine effective MAPbI3 precursor dissolution; provide a set of criteria for appropriate alternative solvent selection; and demonstrate the application of green chemistry principles to solvent selection for perovskite photovoltaic manufacturing.
30 November 2021 in Materials Advances
Green solvent mixes are applied in printed mesoscopic perovskite solar cells and modules, achieving 13.8% PCE at 1 cm 2 and >9% PCE in a 220 cm 2 module. This shows how green solvent engineering can aid improvement and scale-up in emerging technologies.
23 September 2022 in Materials Advances
We use a coating model to enable homogenous deposition of SnO2 for perovskite solar cells. Solvent engineering of the formulation and adaptation of coating parameters is used to apply defect free layers using slot-die coating.
20 March 2025 in Journal of Materials Chemistry A
RGRodrigo Garcia-Rodriguez
+3
Boosting efficiency in roll-to-roll deposited perovskite solar cells using PEDOT:PSS as a buffer layer for the depostion of PTAA.