1 November 2015 in Brazilian Journal of Anesthesiology (English Edition)
Epidural catheter bacteria filters are barriers in the patient-controlled analgesia/anaesthesia for preventing contamination at the epidural insertion site. The efficiency of these filters varies according to pore sizes and materials. The bacterial adhesion capability of the two filters was measured in vitro experiment. Adhesion capacities for standard Staphylococcus aureus (ATCC 25923) and Pseudomonas aeruginosa (ATCC 27853) strains of the two different filters (Portex and Rusch) which have the same pore size were examined. Bacterial suspension of 0.5 Mc Farland was placed in the patient-controlled analgesia pump, was filtered at a speed of 5 mL/h. in continuous infusion for 48 h and accumulated in bottle. The two filters were compared with colony counts of bacteria in the filters and bottles. At the same time, the filters and adhered bacteria were monitored by scanning electron microscope. Electron microscopic examination of filters showed that the Portex filter had a granular and the Rusch filter fibrillary structure. Colony counting from the catheter and bottle showed that both of the filters have significant bacterial adhesion capability (p<0.001). After the bacteria suspension infusion, colony countings showed that the Portex filter was more efficient (p<0.001). There was not any difference between S. aureus and P. aeruginosa bacteria adhesion. In the SEM monitoring after the infusion, it was physically shown that the bacteria were adhered efficiently by both of the filters. The granular structured filter was found statistically and significantly more successful than the fibrial. Although the pore sizes of the filters were same - of which structural differences shown by SEM were the same - it would not be right to attribute the changes in the efficiencies to only structural differences. Using microbiological and physical proofs with regard to efficiency at the same time has been another important aspect of this experiment.
31 December 2020 in International Journal of Automotive Science And Technology
The aim of this study is to investigate the effect of ultrasonic treatment on the microstructural and mechanical properties of A356 aluminum al-loy. Ultrasonic treatment was applied to 2 kg and 4 kg molten metals at different melting temperatures (700 oC, 720 oC and 740 oC) for different durations (0, 60, 180 and 300 seconds). Bifilm indices of the samples were also measured after all parameters were tested. The ultimate tensile strength (UTS) and elongation values were used to calculate the Quality Index (QI) of the samples. According to the results, the amount of liquid metal directly affects the the ultrasonic intensity that is produced during the treatment. Maximum UTS and elongation results were determined at 720 oC during 300 seconds for 4 kg casting. Minimum bifilm density val-ue was measured at the same ultrasonic temperature and time.
15 November 2021 in Journal of the Australian Ceramic Society
30 December 2025 in Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Bu çalışma, döküm alüminyum alaşımlarında üretim sürecinde ortaya çıkan kalıntı gerilmelerin nedenlerini, ölçüm yöntemlerini ve önleme stratejilerini incelemektedir. Kalıntı gerilmeler; ısıl işlem, talaşlı imalat, kaynak gibi işlemlerden sonra, dış yük olmadan malzeme içinde oluşan elastik gerilmelerdir. Bu gerilmeler, parçanın yorulma ömrünü, mekanik performansını ve boyutsal doğruluğunu doğrudan etkiler. Özellikle T6 gibi ısıl işlem süreçlerinde, su verme sırasında meydana gelen ani sıcaklık değişimleri ciddi kalıntı gerilmeler yaratabilir. Çalışmada delik delme, halka çekirdek ve kontur gibi tahribatlı; X-ışını kırınımı, ultrasonik ve nötron kırınımı gibi tahribatsız yöntemler detaylı şekilde incelenmiş, bunların avantaj ve dezavantajları karşılaştırılmıştır. Ayrıca, sonlu elemanlar analizleriyle yapılan analitik ölçüm yöntemlerine de yer verilmiştir. Yorulma ömrü açısından, çeki kalıntı gerilmeleri zararlı olurken, bası gerilmeleri ömrü artırabilir. Bu nedenle kalıntı gerilmelerin ölçümü kadar kontrolü de önemlidir. Gerilme giderme tavlaması, düşük sıcaklıkta yaşlandırma ve yüzey işlemleri gibi yöntemlerle bu gerilmeler azaltılabilir. Sonuç olarak, kalıntı gerilmelerin dikkatli yönetimi, daha dayanıklı ve güvenilir mühendislik parçaları üretimini mümkün kılar.