Ning Zhang

Ning Zhang

Auto-generated profile, based on publicly available information

Ning Zhang

State Key Laboratory for Disaster Prevention & Mitigation of Explosion & Impact, PLA University of Science and Technology, Nanjing 210007, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2017 in Journal of Reinforced Plastics and Composites
Verified
Journal Article
Closed access
JCJianwen Chen
Jianwen Chen
Wujun ChenWujun Chen
Wujun Chen
HZHan Zhou
Han Zhou
BZBing Zhao
Bing Zhao
YDYong Ding
Yong Ding
NZNing Zhang
Ning Zhang
Based on our prior study on uniaxial tearing tests, the influences of slit parameters, off-axis angles, and loading speeds on the tearing behaviors and strengths were discussed further. Results show that the tearing behaviors and strengths of the studied material are affected by above factors significantly, and typical tearing stress-displacement curves could be defined as four characteristic regions: a co-deformation region, a yarn extension region (or shear deformation region), a plateau region, and a post peak region. There is a W-shaped relationship between tearing strength and off-axis angle, with a small peak at 45°, and a new tearing strength criterion consisting of two parts, i.e., an inverted V-shaped part and a U-shaped part, was proposed for this laminated fabric. Comparisons between the experimental and the calculated results for the laminated fabric were performed, and the strong agreements demonstrate that the proposed criterion is feasible and accurate.

15 August 2016 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
YSYue Songlin
Yue Songlin
YQYanyu Qiu
Yanyu Qiu
PFPengxian Fan
Pengxian Fan
PZPin Zhang
Pin Zhang
NZNing Zhang
Ning Zhang
Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand), fine aggregate (barite powder), and cementitious material (anhydrous sodium silicate). The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.

13 November 2015
Verified
Conference Paper
Closed access
PDF file
AOAdam M. Oler
Adam M. Oler
NZNing Zhang
Ning Zhang
SBSteven Brandt
Steven Brandt
QCQin J. Chen
Qin J. Chen
Hydrodynamic simulations of storm-surge waves on coastal structures are essential for coastal areas in predicting wave and flood damages. In a large scale regional model, the coastal structures, such as networks of coastal highways, floodgates and levees, are often complex in shapes. In addition, the width of those structures are smaller in size compared to the grid sizes which in the ranges of 10s to 100s meters. Therefore, in hydrodynamic simulations, it is not possible to use body fitted mesh to conform with the shapes of those networks due to the complicated shapes, and it is very expensive to resolve these small scale structures with very fine grid resolutions. The Immersed Boundary Method (IBM) allows for overcoming these difficulties with an accurate but less expensive way. Since the structures were represented by immersed boundary (IB) points which do not have to be collocated with grid points, complicates shapes structures and the structures smaller than grid resolutions can be realized, and simple Cartesian grids can be utilized without sacrificing accuracy. In a previous study by the authors, an infinite height floodgate/levee structure has been implemented using an IBM which the IB force terms were added in both u and v equations while no IB force term in z (water-elevation) equation. In this study, the height effect was added to the previous developed model. It is worth mentioning that the background flow model is a 2-D depth-averaged shallow water flow model, and the height effect is not implemented by a 3-D mesh. Instead, it is implemented by adding the IB force to the water-elevation equation. The feedback-force type of IBM was used in this study because of its superior performance on this type of simulations compared to the counterpart direct-forcing IBM as shown in the author’s previous publication. In this study, the CaFunwave package was used as the background flow solver, and the IB implementation was written into an separate function incorporated to the package. The equations solved in CaFunwave are the fully nonlinear Boussinesq-type equations, which are capable of modeling of near-shore hydrodynamics. The original model of CaFunwave is FUNWAVE-TVD. In this paper, constant height and non-constant height floodgates/levees were implemented in the simulations. Non-constant height represents broken floodgate/levee situations that parts of the structure are collapsed. The results of one constant-height gate simulation were compared to the results of a simulation that a finite height gate that was constructed directly from the topography data for validation. The floodgate/levee height and shape effects on the flows and waves were revealed from the simulation results.

1 June 2016 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
MWMingyang Wang
Mingyang Wang
YSYue Songlin
Yue Songlin
NZNing Zhang
Ning Zhang
KGKanghua Gao
Kanghua Gao
DWDerong Wang
Derong Wang
For underground explosions, a thin to medium thickness layer near the cavity of an explosion can be considered a theoretical shell structure. Detonation products transmit the effective energy of explosives to this shell which can expand thus leading to irreversible deformation of the surrounding medium. Based on mass conservation, incompressible conditions, and boundary conditions, the possible kinematic velocity fields in the plastic zone are established. Based on limit equilibrium theory, this work built equations of material resistance corresponding to different possible kinematic velocity fields. Combined with initial conditions and boundary conditions, equations of motion and material resistance are solved, respectively. It is found that critical depth of burial is positively related to a dimensionless impact factor, which reflects the characteristics of the explosives and the surrounding medium. Finally, an example is given, which suggests that this method is capable of calculating the critical depth of burial and the calculated results are consistent with empirical results.