In this article, a low-profile third-order absorber with high selectivity is proposed. Compared with traditional absorbers that perform similar functions using a multilayer composite structure, the developed absorber utilizes the slot-line loading technique to obtain a third-order multimode resonance response with only one resonator. As well, the absorber has relatively better polarization insensitivity and large incidence angle stability. With the detailed analysis of surface current distribution in different modes, the action mechanisms of multimode resonance, rectangularity, and effective absorption are revealed. Finally, the absorbers are fabricated for demonstration. From 15.58 to 16.60 GHz, the absorber can attain an absorption bandwidth of 6.3% under an absorption ratio of >90%. Due to the increase in order, the rectangularity can be up to 67%. As expected, the proposed absorber has the attractive advantages of high-selectivity, low profile, and third-order performance, which is of great application potential in radar stealth and solving electromagnetic interference technology.
15 August 2016 in Advances in Materials Science and Engineering
Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand), fine aggregate (barite powder), and cementitious material (anhydrous sodium silicate). The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.
Synthetic aperture radar (SAR) features all-weather and all-day imaging capabilities, long-range detection, and high resolution, making it indispensable for battlefield reconnaissance, target detection, and guidance. In recent years, deep learning has emerged as a prominent approach for the classification of SAR image targets, owing to its hierarchical feature extraction, progressive refinement, and end-to-end learning capabilities. However, challenges such as the high cost of SAR data acquisition and the limited number of labeled samples often result in overfitting and poor model generalization. In addition, conventional layers typically operate with fixed receptive fields, making it difficult to simultaneously capture multiscale contextual information and dynamically focus on salient target features. To address these limitations, this paper proposes a novel architecture: the Multiscale Dilated Fusion Attention All-Convolution Network (MDFA-AconvNet). The model incorporates a multiscale dilated attention mechanism that significantly broadens the receptive field across varying target scales in SAR images without compromising spatial resolution, thereby enhancing multiscale feature extraction. Furthermore, by introducing both channel attention and spatial attention mechanisms, the model is able to selectively emphasize informative feature channels and spatial regions relevant to target recognition. These attention modules are seamlessly integrated into the All-Convolution Network (A-convNet) backbone, resulting in comprehensive performance improvements. Extensive experiments on the MSTAR dataset demonstrate that the proposed MDFA-AconvNet achieves a high classification accuracy of 99.38% in ten target classes, markedly outperforming the original A-convNet algorithm. These compelling results highlight the model’s robustness against target variations and its significant potential for practical deployment, paving the way for more efficient SAR image classification and recognition systems.