Optimizing the properties of optical and photonic devices calls for the need to control and manipulate light within structures of different length scales, ranging from sub-wavelength to macroscopic dimensions. Working at different length scales, however, requires different simulation approaches, which have to account properly for various effects such as polarization, interference, or diffraction: at dimensions much larger than the wavelength of light common ray-tracing techniques are conveniently employed, while in the (sub-)wavelength regime more sophisticated approaches, like the socalled finite-difference time-domain (FDTD) technique, are used. Describing light propagation both in the (sub-)wavelength regime as well as on macroscopic length scales can only be achieved by bridging between these two approaches. Unfortunately, there are no well-defined criteria for a switching from one method to the other, and the development of appropriate selection criteria is a major issue to avoid a summation of errors. Moreover, since the output parameters of one simulation method provide the input parameters for the other one, they have to be chosen carefully to ensure mathematical and physical consistency. In this contribution we present an approach to combine classical ray-tracing with FDTD simulations. This enables a joint simulation of both, the macro- and the microscale which refer either to the incoherent or the coherent effects, respectively. By means of an example containing one diffractive optical element (DOE) and macroscopic elements we will show the basic principles of this approach and the simulation criteria. In order to prove the physical correctness of our simulation approach, the simulation results will be compared with real measurements of the simulated device. In addition, we will discuss the creation of models in FDTD based on different analyze techniques to determine the dimensions of the DOE, as well as the impact of deviations between these different FDTD models on the simulation results.
8 November 2014 in Journal of Solid State Lighting
For a systematic approach to improve the white light quality of phosphor converted light-emitting diodes (LEDs) for general lighting applications it is imperative to get the individual sources of error for correlated colour temperature (CCT) reproducibility and maintenance under control. In this regard, it is of essential importance to understand how geometrical, optical and thermal properties of the colour conversion elements (CCEs), which typically consist of phosphor particles embedded in a transparent matrix material, affect the constancy of a desired CCT value. In this contribution we use an LED assembly consisting of an LED die mounted on a printed circuit board by chip-on-board technology and a CCE with a globe-top configuration on the top of it as a model system and discuss the impact of the CCE size, the substrate reflectivity as well as the thermal load of the CCEs on CCT maintenance and the respective radiant fluxes. It turns out that optimized solutions for CCT maintenance and high radiant fluxes in regard of one of the relevant influence factors do not need to be optimized solutions in regard of another one.