24 June 2022 in Journal of Mathematics, Mechanics and Computer Science
In this work there has been studied the rod system operation dependence on the action ofexternal force effects. The system presents a multi-span continuous beam with elastic yieldingsupports. To identify the stress-strain state of the object under study, a precise analytical methodof forces is used. The method of five moments is used as the resolving (canonical) equations. Thefinal results are the parameters of the stress-strain state for a five-span continuous beam withvariable compliance coefficients on 5 intermediate supports and an absolutely rigid left extremesupport, deflections, bending moments, shear forces, and support reactions.Theoretical provisionsand practical results can be used in the design of load-bearing beam structures in buildings andvarious engineering structures.
15 December 2018 in Series of Geology and Technical Sciences
1 November 2020 in Series of Geology and Technical Sciences
The present work is devoted to mathematical modeling of the process of the hereditary materials relaxation. Nonlinear integral equation of a hereditary type is proposed. The Abel kernel with two unknown parameters is adopted as the kernel of the integral equation: alpha is an element of (0,1), delta > 0. Two new characteristics were introduced: 1) experimental rheological parameter of relaxation; 2) calculated (model) rheological parameter of relaxation. Using the least squares method, expressions are obtained to determine unknown parameters of the Abel kernel. A mathematical expression is given to approximate the process of the hereditary materials relaxation. Using examples of rheonomic materials different in structure (polyurethane matrix, propellant, polyoxymethylene, fiberglass), it is shown that the proposed methods allow to determine Abel kernel parameters with a high accuracy and to model the process of relaxation of rheonomic materials different in structure during a long period of time: from 10(2) to 1.8.10(6) seconds (500 hours).
7 April 2023 in Journal of Mathematics, Mechanics and Computer Science
Using of rheonomic materials in engineering structures is one of the most important issues in determining strength and durability. The main task of the mechanics of a deformable solid is to simulate the processes of deformation of viscoelastic materials. Currently, there are quite well-developed theories and methods of viscoelasticity that allow to determine and describe the viscoelastic properties of materials. They differ between linear and nonlinear viscoelasticity. In the linear and nonlinear theory of viscoelasticity, such a task is reduced to finding creep and relaxation kernel. Creep and relaxation kernel are interconnected by a known integral relationship that establishes a relationship between stress, strain and time. The work is devoted to modeling of stress relaxation and sttrain of hereditary materials. Stress relaxation is described by a nonlinear integral equation with an Abel’s kernel. New efficient method has been proposed for determining of parameters (α, δ). Bisection method is used for obtaining of parameter α. Algorithm have been developed for calculating of parameters of α and δ.
12 March 2026 in Technobius
This paper presents a refined analytical theory for the bending and free vibration analysis of functionally graded (FG) beams accounting for transverse shear deformation. The material properties are assumed to vary continuously through the thickness according to a power-law distribution. Based on the adopted kinematic assumptions, the governing differential equations and effective stiffness relations are derived for both static and dynamic problems. Analytical solutions for the static bending of an FG beam under a uniformly distributed load and for the natural frequencies of free vibrations are obtained. A parametric study is performed to evaluate the influence of the material gradient index ???? and the beam slenderness ratio ????/h. The results show that the dimensionless mid-span deflection increases from 6.2586 to 9.6986 when the gradient index changes from ???? = 1 to ???? = 5 for ????/ℎ = 5. The corresponding dimensionless natural frequency decreases from 3.9710 to 3.4025. Comparisons with the Timoshenko beam theory, Reddy’s higher-order theory, and other refined models demonstrate very good agreement, with differences typically not exceeding 3-5%. The proposed formulation provides a realistic distribution of transverse shear stresses and converges to classical beam solutions for slender beams. The developed model can be effectively applied in the analysis and design of engineering structures made of functionally graded materials.
20 June 2024 in Journal of Mathematics, Mechanics and Computer Science
The article considers a problem of calculating the deformations of forward and reversed creep tension of rheonomic materials. The hereditary theory of creep by Yu.N. Rabotnov is used to describe the nonlinear deformation process. Proposed a method for determining the necessary material characteristics from forward and reversed creep data. During the experiments, there were tested two batches of asphalt concrete samples. Also, was shown behavior of asphalt concrete at cyclic increasing and constant loading modes. At a temperature T = 24 °C were tested 10 samples at cyclic increasing loading mode. Cyclic stresses were equal to 0.041; 0.074; 0.111; 0.148; 0.183 MPa and duration period between loading and relax period were chosen to be 570 seconds. At cyclic constant loading were investigated individual samples for the parameters of forward and reversed creep at stresses of 0.041; 0.117. Then, investigated the affect of reloading two reversed creep process of asphalt concrete samples. From first batch of samples were tested 9 samples before destruction with a period 65 seconds: forward creep of samples at for the following 5 seconds; reversed creep at for the following 60 seconds. From the second batch of samples were tested 11 samples of asphalt concrete before destruction with period 70 seconds: forward creep for the following 10 seconds and reversed creep at for the following 60 seconds. Test results showed that the level of return of second batch increased than the first batch of samples. In the work were tested 5 samples of asphalt concrete according to the direct tensile scheme until a complete failure. Test temperature was T=22-24 °C. For each level of loading with constant rate: 0,6519; 0,4678; 0,0580; 0,0489; 0,0055 MPas-1.Using experimental data, were found parameters of the deformation at different constant rate of loading. As a result, all samples fractured brittle at small deformations.