9 May 2022 in IEEE Access
This paper proposes a multiport DC-DC converter for EV fast-charging stations. The proposed converter is comprised of Ring-Connected Dual Active Bridge (RCDAB) DC-DC converters, where the connection point between every two adjacent DABs provides a DC port. Bypass switches are added to each DAB to eliminate unnecessary power processing stages in the event of idle ports (no EVs) (open circuit ports). The nature of the ring connection of the RCDAB theoretically allows infinite internal power flow solutions within the ring to satisfy a certain power flow scenario at the DC ports, hence, the optimal power flow solution can be selected to minimize total RMS current and losses. Single-phase shift control is applied to this optimization problem to make it simple. A novel closed-loop control scheme using Bisection optimization is developed to minimize the total RMS current. A control-hardware-in-the-loop (CHiL) validation is carried out for a 5-port network of the proposed topology to investigate the converter efficiency and fault tolerance/availability characteristics. Also, an experimental hardware validation is implemented for a 3-port network where different scenarios for power flow and faults are performed. Finally, a comparative discussion between the proposed topology and other multiport topologies in literature is presented revealing the superior performance of the RCDAB topology.
20 April 2021 in IEEE Access
Multi-terminal high voltage DC transmission currently represents a leading technology in long-distance power transmission systems. Among the main technical challenges facing such technology, DC fault isolation, permitting different grounding schemes, providing interoperability, and high DC voltage stepping between different HVDC networks, and allowing high-speed power reversal without power interruption especially when connecting the pre-existing voltage source converters (VSC) and line commutated converters (LCC)-based HVDC networks. This paper introduces a new modular multilevel converter (MMC) based front-to-front DC-DC converter to interconnect two different types (LCC/VSC) of HVDC networks. The proposed topology comprises a voltage source MMC (VS-MMC) and a current source MMC (CS-MMC), while both are coupled via an AC link including the isolating transformer. The proposed topology can successfully provide an uninterruptible bi-directional power flow, high DC voltage stepping with a DC fault blocking capability, and low number of semiconductors due to the usage of only half-bridge SMs. The system design is provided with a detailed mathematical analysis. Furthermore, two active power control methodologies are proposed and compared. The first control technique is simpler and entails lower passive elements, while the second technique ensures a zero reactive power over the full range of active power flow. Furthermore, Losses analysis and comparison are provided between the two proposed control techniques. Finally, Control-Hardware-in-the-Loop (CHiL) test validation is employed to confirm the validity of the proposed system under healthy as well as different fault scenarios.
27 October 2023 in IEEE Transactions on Power Electronics
High voltage direct current systems are the most suitable solution for distant high-power transmission, where modular multilevel converters (MMCs) are now utilized due to their controllability, modularity, redundancy, and scalability. Dc fault blocking capability in MMCs is normally achieved by using full-bridge submodules (FB-SMs) in the arms. However, using FB-SMs results in a high semiconductor count, which increases power losses and the overall cost. In this article, a new hybrid thyristor-based multilevel converter (HTMC) with dc fault blocking capability is proposed that uses a low number of FB-SMs with a majority of half-bridge submodules and antiparallel thyristor valves. The theory of operation is detailed including the function of each element and thyristor valve commutation. Full parameter analysis is provided for the proposed converter. The claims of the article are verified using a MATLAB Simulink model and an experimental test rig. Additionally, a detailed comparison with other viable converters is provided, which establishes that the proposed HTMC converter offers a low number of IGBTs, and lower cost and losses, with dc fault-blocking capability.
1 January 2025 in IET Power Electronics
The interest in interconnecting multiple DC grids‐ medium‐voltage direct current/high‐voltage direct current (MVDC/HVDC)‐ across the globe has grown significantly in recent years. This interest is primarily driven by the benefits of increased reliability and cost efficiency in power transmission systems, particularly with the growing utilisation of renewable energy resources. However, some HVDC networks are based on line commutated converters (LCC), while other MVDC/HVDC rely on voltage source converters (VSC). In this context, this paper introduces a new DC‐Hub that facilitates the interconnection between multiple VSC‐ and LCC‐based DC networks using hybrid IGBT/IGCT device technology. The proposed converter enables power reversal without interruption, promotes multi‐vendor interoperability, and provides galvanic isolation. An important aspect of the design is its modularity, allowing each port to have an independent design for interfacing with the HVDC/MVDC grid without affecting the other ports. This modularity enables further port extension or elimination without requiring modifications to the remaining ports. The paper also discusses AC filter design and power flow control techniques to achieve zero reactive power circulation at rated port power, thereby reducing power losses. Finally, to validate the theoretical claims of the proposed system, both a simulation model and an experimental hardware test rig have been established.
30 July 2025 in IEEE Transactions on Sustainable Energy
Offshore wind farm (WF) DC collection systems offer significant reductions in weight and size compared to conventional AC systems. Among DC architectures, the series-parallel wind farm (SP-WF) configuration achieves higher efficiency by reducing the number of power conversion stages. However, because SP-WF places the DC-DC converter upstream of the series connection of wind turbines (WTs), it suffers from reduced reliability due to its vulnerability to DC short-circuit faults within the series string. This paper proposes a novel series-isolated-parallel wind farm (SIP-WF) architecture that enhances reliability by integrating a DC-DC converter to isolate each group of series-connected WTs. This isolation provides intrinsic DC fault blocking capability without the need for external DC circuit breakers. Furthermore, as only passive rectifiers are used at each individual WT, the proposed SIP-WF architecture maintains high efficiency. To manage maximum power point tracking (MPPT) across turbines experiencing different wind conditions, two new centralized control strategies are proposed to coordinate multiple WTs using a single DC-DC converter per group. The proposed SIP-WF architecture and control strategies are validated through simulations in MATLAB/Simulink. A comprehensive performance comparison is conducted against existing DC collection topologies. The results demonstrate that SIP-WF achieves a higher net energy yield while reducing cost, system weight, and volume, and offering superior fault tolerance compared to conventional architectures.