Ke Ran

Ke Ran

Auto-generated profile, based on publicly available information

Ke Ran

Central Facility for Electron Microscopy (GFE) RWTH Aachen University Aachen Germany

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 October 2022 in Membranes
Verified
Journal Article
Open access
PDF file
Aline Alencar EmerencianoAline Alencar Emerenciano
Aline Alencar Emerenciano
RNRubens Maribondo do Nascimento
Rubens Maribondo do Nascimento
ABAna Paula Cysne Barbosa
Ana Paula Cysne Barbosa
KRKe Ran
Ke Ran
WMWilhelm Albert Meulenberg
Wilhelm Albert Meulenberg
Jesus Gonzalez-JulianJesus Gonzalez-Julian
Jesus Gonzalez-Julian
Two-dimensional (2D) MXene materials have recently been the focus of membrane research due to their unique properties, such as their single-atomic-layer thickness, flexibility, molecular filtration abilities and microstructural similarities with graphene, which is currently the most efficient precursor material for gas separation applications. In addition, the potential to process nanoscale channels has motivated investigations of parameters which can improve membrane permeability and selectivity. Interlayer spacing and defects, which are still challenging to control, are among the most crucial parameters for membrane performance. Herein, the effect of heat treatment on the d-spacing of MXene nanosheets and the surface functionalization of nanolayers was shown regarding its impact on the gas diffusion mechanism. The distance of the layers was reduced by a factor of over 10 from 0.345 nm to 0.024 nm, the defects were reduced, and the surface functionalization was maintained upon treatment of the Ti3C2 membrane at 500 °C under an Ar/H2 atmosphere as compared to 80 °C under vacuum. This led to a change from Knudsen diffusion to molecular sieving, as demonstrated by single-gas permeation tests at room temperature. Overall, this work shows a simple and promising way to improve H2/CO2 selectivity via temperature treatment under a controlled atmosphere.

6 May 2021 in Journal of the American Ceramic Society
Verified
Journal Article
Open access
PDF file
MKMoritz Kindelmann
Moritz Kindelmann
KRKe Ran
Ke Ran
Wolfgang RheinheimerWolfgang Rheinheimer
Wolfgang Rheinheimer
Koji MoritaKoji Morita
Koji Morita
JMJoachim Mayer
Joachim Mayer
OGOlivier Guillon
Olivier Guillon
Cation doping of Y 2 O 3 is an established approach for tailoring densification and grain growth during sintering. However, the segregation of doped cations to the grain boundary and their impact on processing are still not completely understood. Segregation can be driven by electrostatic effects due to charge mismatch with the host lattice or elastic effects induced by ion size mismatch. While segregation is caused by thermodynamics, it impacts diffusion and the kinetics of grain boundaries during densification and microstructure evolution. In this study, we utilize two isovalent dopants (La 3+ and Gd 3+ ), that is we focus on the elastic component of segregation. We investigate the densification as well as the grain growth kinetics of both doped and undoped Y 2 O 3 during field‐assisted sintering/spark plasma sintering (FAST/SPS). While Gd 3+ is showing no significant effect on densification, La 3+ resulted in a strongly reduced sintering activity. Furthermore, the analysis of the grain growth behavior during sintering and on predensified samples revealed a decrease in the grain growth coefficient, with La 3+ having the strongest impact. The structure and chemistry at the grain boundary were observed by aberration‐corrected TEM. While no structural change was caused by doping, the chemical analysis showed a strong segregation of La 3+ to the grain boundary, which could not be observed for Gd 3+ . The results indicate that segregated La 3+ causes a drastic decrease in grain boundary migration rates through solute drag as well as much slower sintering kinetics, likely caused by a decrease in the grain boundary self‐diffusion due to segregation. This study further underlines the importance of the elastic contribution to cation segregation and establishes a clear relationship to grain growth and sintering kinetics, which are both decreased by segregation.

5 May 2023 in Advanced Functional Materials
Verified
Journal Article
Open access
LVLukas Völkel
Lukas Völkel
DBDennis Braun
Dennis Braun
MBMelkamu Belete
Melkamu Belete
SKSatender Kataria
Satender Kataria
TWThorsten Wahlbrink
Thorsten Wahlbrink
MLMax Lemme
Max Lemme
The 2D insulating material hexagonal boron nitride (h‐BN) has attracted much attention as the active medium in memristive devices due to its favorable physical properties, among others, a wide bandgap that enables a large switching window. Metal filament formation is frequently suggested for h‐BN devices as the resistive switching (RS) mechanism, usually supported by highly specialized methods like conductive atomic force microscopy (C‐AFM) or transmission electron microscopy (TEM). Here, the switching of multilayer hexagonal boron nitride (h‐BN) threshold memristors with two nickel (Ni) electrodes is investigated through their current conduction mechanisms. Both the high and the low resistance states are analyzed through temperature‐dependent current–voltage measurements. The formation and retraction of nickel filaments along boron defects in the h‐BN film as the resistive switching mechanism is proposed. The electrical data are corroborated with TEM analyses to establish temperature‐dependent current–voltage measurements as a valuable tool for the analysis of resistive switching phenomena in memristors made of 2D materials. The memristors exhibit a wide and tunable current operation range and low stand‐by currents, in line with the state of the art in h‐BN‐based threshold switches, a low cycle‐to‐cycle variability of 5%, and a large On/Off ratio of 107.

12 August 2025 in Nature Communications
Verified
Journal Article
Open access
PDF file
KRKe Ran
Ke Ran
JJJanghyun Jo
Janghyun Jo
SCSofía Cruces
Sofía Cruces
ZWZhenxing Wang
Zhenxing Wang
RDRafal Dunin-Borkowski
Rafal Dunin-Borkowski
MLMax Lemme
Max Lemme
Advanced operando transmission electron microscopy (TEM) techniques enable the observation of nanoscale phenomena in electronic devices during operation. Here, we investigated lateral memristive devices composed of two dimensional layered MoS2 with Pd and Ag electrodes. Under external bias voltage, we visualized the formation and migration of Ag conductive filaments (CFs) between the two electrodes, and their complete dissolution upon reversing the biasing polarity. The CFs exhibited a wide range of sizes, from several Ångströms to tens of nanometers, and followed diverse pathways: along the MoS2 surfaces, within the van der Waals gap between MoS2 layers, and through the spacing between MoS2 bundles. Our method enables correlation between current-voltage responses and real-time TEM imaging, offering insights into failed and anomalous switching behaviors, and clarifying the cycle-to-cycle variabilities. Our findings provide solid evidence for the electrochemical metallization mechanism, elucidate the formation dynamics of CFs, and reveal key parameters influencing the switching performance.

7 August 2025 in Nano Letters
Verified
Journal Article
Open access
SCSofía Cruces
Sofía Cruces
MGMohit D. Ganeriwala
Mohit D. Ganeriwala
JLJimin Lee
Jimin Lee
KRKe Ran
Ke Ran
JJJanghyun Jo
Janghyun Jo
MLMax Lemme
Max Lemme
Developing electronic devices capable of emulating biological functions is essential for advancing brain-inspired computation paradigms such as neuromorphic computing. In recent years, two-dimensional materials have emerged as promising candidates for neuromorphic electronic devices. This work addresses the coexistence of volatile and nonvolatile resistive switching in lateral memristors based on molybdenum disulfide with silver as the active electrode. The fabricated devices exhibited switching voltages of ∼0.16 V and ∼0.52 V for volatile and nonvolatile operation, respectively, under direct-current measurements. They also displayed the essential synaptic functions of paired-pulse facilitation and short- and long-term plasticity under pulse stimulation. The operation mechanism was investigated by in situ transmission electron microscopy, which showed lateral migration of silver ions along the molybdenum disulfide between electrodes. Based on the experimental data, a macroscopic semiclassical electron transport model was used to reproduce the current-voltage characteristics and support the proposed underlying switching mechanisms.

27 January 2025 in Small Science
Verified
Journal Article
Open access
SCSofía Cruces
Sofía Cruces
MGMohit Dineshkumar Ganeriwala
Mohit Dineshkumar Ganeriwala
JLJimin Lee
Jimin Lee
LVLukas Völkel
Lukas Völkel
DBDennis Braun
Dennis Braun
MLMax Lemme
Max Lemme
Layered 2D semiconductors have shown enhanced ion migration capabilities along their van der Waals (vdW) gaps and on their surfaces. This effect can be employed for resistive switching (RS) in devices for emerging memories, selectors, and neuromorphic computing. To date, all lateral molybdenum disulfide (MoS2)‐based volatile RS devices with silver (Ag) ion migration have been demonstrated using exfoliated, single‐crystal MoS2 flakes requiring a forming step to enable RS. Herein, present volatile RS with multilayer MoS2 grown by metal‐organic chemical vapor deposition (MOCVD) with repeatable forming‐free operation is presented. The devices show highly reproducible volatile RS with low operating voltages of ≈2 V and fast‐switching times down to 130 ns considering their micrometer‐scale dimensions. The switching mechanism is investigated based on Ag ion surface migration through transmission electron microscopy, electronic transport modeling, and density functional theory. Finally, a physics‐based compact model is developed and the implementation of the volatile memristors as artificial neurons in neuromorphic systems is exploredd.