The influence of plant fillers on the flammability and smoke emission of natural composites was investigated. Epoxy composites with 15, 25, and 35 wt % of walnut and hazelnut shell, as well as sunflower husk, were prepared and examined. The ground organic components were characterized by grain size distribution, thermogravimetric analysis (TGA) and microstructure observations (SEM). The composite materials were subjected to dynamic mechanical analysis (DMA) and structural evaluation with scanning electron microscopy. Cone calorimeter tests and TGA determined the influence of plant waste filler addition on thermal stability and flammability. Moreover, the semi-volatile and volatile compounds that evolved during the thermal decomposition of selected samples were identified using a steady state tube furnace and a gas chromatograph with a mass spectrometer. The intensity of the degradation reduced as a function of increasing filler content, while the yield of residue corresponded to the amount of lignin that is contained in the tested plants. Moreover, the incorporation of agricultural waste materials resulted in the formation of a char layer, which inhibits the burning process. The yield of char depended on the amount and type of the filler. The composites containing ground hazelnut shell formed swollen char that was shaped in multicellular layers, similar to intumescent fire retardants.
Using one-step method, rigid polyurethane foams were made, modified with developed fire retardant systems containing halogen-free flame retardants and nanofillers in the form of multi-walled carbon nanotubes or nanoscale titanium dioxide. The materials were subjected to a test using a cone calorimeter and smoke-generating chamber, and selected samples were further analyzed via thermogravimetry and oxygen index. Moreover, the products of thermal degradation of selected samples were identified using gas chromatography with mass spectrometer. Conducted flammability tests confirmed the presence of a synergistic effect between the used nanofillers and halogen-free flame retardants. It has been observed that the carbonized layer, the formation of which favored the presence of nanoadditives, inhibits the combustion process. Furthermore, nanofillers influenced favorably reduction in the amount and the number of occurring products of thermal degradation.
Relaxation frequencies fr characterising the molecular rotation around the short axes (flip-flop movement) of 45 three- and four-ring polar compounds with high birefringence (mainly cyclohexyl, phenyl and biphenyl tolanes and quaterphenyls terminated with F, OCF3, NCS group) have been measured. These compounds exhibit a large positive dielectric anisotropy Δε = ε║ − ε⊥ in the nematic phase and relatively low fr values (in the range of dozens kHz). The dependence of fr upon molecular structures and physical properties of systems (molecular rigid core length, polarity and viscosity) is discussed. Mixtures for dual frequencies addressing display with the crossover frequency fco of the order of ~1 kHz have been prepared by joining the above compounds with a mixture consisted of two, three and four fluoro-substituted in the lateral position tolanes and phenyltolanes showing negative dielectric anisotropy. It was stated that relaxation frequency is correlated mainly with their length and polarity.
1 November 2020 in Polymer Degradation and Stability