Key Laboratory of Materials Modification by Laser, Ion, and Electron Beams (Dalian University of Technology), Ministry of Education, School of Physics , Dalian 116024, People's Republic of China
Auto-generated profile, based on publicly available information
Jia-Qi Li
Key Laboratory of Materials Modification by Laser, Ion, and Electron Beams (Dalian University of Technology), Ministry of Education, School of Physics , Dalian 116024, People's Republic of China
The surface charge distribution in a surface dielectric barrier discharge driven by repetitive pulse bias superimposed on AC voltage is measured using the Pockels effect of an electro-optic crystal. The impact of surface charge on surface-breakdown characteristics is investigated by varying the phase of the pulse superimposition. It is demonstrated that the surface charge accumulation varies at different superimposition phases depending on the potential difference between the two electrodes. The accumulated positive/negative surface charge will facilitate the following surface discharge when the AC voltage polarity changes. In addition, different spatiotemporal characteristics of the surface charge distribution are presented when changing the polarity of superimposed pulses. Positive surface discharges are usually easier to develop than negative surface discharges due to their lower breakdown voltage caused by the accumulation of negative surface charges near the edges of exposed electrodes. The decay of positive surface charge is dominated by neutralization of negative surface charge and negatively charged particles (free electrons and negative ions) from the volume above the dielectric. There are two decay modes of positive surface charge: exponential decay and linear decay.
The influence of the cylindrical exposed electrode diameter on distribution and attenuation of the surface charge in surface dielectric barrier discharges is experimentally investigated using the Pockels effect of the Bi12SiO20 crystal. For the actuator with the smaller exposed electrode diameter, more positive charges accumulate closer to the exposed electrode after positive half periodic discharge, while the quantity of positive charges deposited on the surface in a discharge period at the same distance away from the exposed electrode is smaller. At the same time, the smaller the exposed electrode diameter is, the shorter decay time the positive charge filament needs. Combined with thrust generation of actuators, it can be indicated that a positive residual surface charge closer to the exposed electrode may play a more crucial role in the discharge and consequent thrust than one far away from the exposed electrode does. Also, the effect on the discharge of the positive residual surface charge may be greater than that of the negative residual surface charge. More explorations of the residual surface charge have been done by selectively enhancing the discharge of the actuator with a 10 μm exposed electrode using the pulse-AC dual power supply, drawing the same conclusions.
The cathode layer of surface dielectric barrier discharge plasma is investigated experimentally by using the surface potential measurement under different bias voltages. Positive charge accumulation is found near the edge of the exposed electrode (x = 0 mm) under negative DC bias voltage. In addition, the plasma electromotive force (EMF) distribution curve near the edge of the exposed electrode diverges with the negative DC bias voltage. These phenomena are in good agreement with the conclusion that the cathode layer shows positive potential in time average. Five actuators with different exposed electrode widths are designed to study the relationship between the cathode layer and the mechanical properties of the actuator. With the widening of the exposed electrode, the positive charges in the cathode layer increase, and the plasma EMF divergence is more pronounced. However, the thrust force decreases. Moreover, the variation of thrust force with DC bias voltage is consistent with the change of the plasma EMF. The experimental results show that the narrow-exposed electrode actuator for the cathode layer with a small size and low number of positive ions has better mechanical properties. By analysis, this is mainly due to the lower number of positive ions of the cathode layer, producing less shielding from the applied voltage. More electrons are emitted from the cathode layer. This paper provides a method for the detection and study of the cathode layer. In addition, it can provide insight into how the cathode layer affects the development of thrust force.
28 October 2025 in International Journal of Hydrogen Energy