1 September 2023 in APL Photonics
Wideband radio frequency (RF) channelization is essential for the reception and detection of cross-band RF signals in various applications, including communications, radar, and spectrum sensing. However, digital channelizers are inefficient at performing RF channelization over a working bandwidth above 10 GHz. Meanwhile, current photonic RF channelizers face challenges in simultaneously considering a wideband, multi-channel, and a high crosstalk suppression ratio. In this work, we proposed and demonstrated a wideband image-reject RF channelization scheme based on integrated dual-soliton microcombs. The dual-soliton microcombs are used for RF spectral copies and heterodyne detection, respectively. Supported by image-reject mixers, the RF channelization is verified with an 8–37 GHz working bandwidth, a 1.2 GHz channel bandwidth, and 25 channels. The image suppression ratio is higher than 34 dB for single-tone signals and 20 dB for wideband signals. Our approach provides an innovative architecture of integrated photonic RF channelizers with high performance, which can benefit a wide range of RF applications by miniaturizing the systems.
19 September 2023 in Journal of Lightwave Technology
Integrated dissipative Kerr soliton (DKS) frequency combs have shown great promise in microwave photonics applications due to their versatile merits. For example, the smooth sech 2 -shaped spectral envelope of single soliton states enables a microwave photonic filter (MPF) without the need for additional pulse shaping. The reconfiguration of the MPF can be further realized by leveraging the intrinsically rich soliton states. However, deterministic access of different soliton states remains challenging, which limits the reconfiguration of MPFs. In this work, we demonstrate a programmable MPF based on two-soliton microcombs (TSMs) with in situ tunability from a dual-cavity coupled microresonator structure. The optical signal of TSM can be mapped to an electrical filtering response, and the resulting filter passband frequency is proportional to the relative angle between two solitons. The relative angle between the solitons is manipulated by the avoided mode crossing (AMX). The solitons are trapped by AMX-induced background modulation field whose amplitude and spectral position can be tuned by the coupled microresonator. The tunable coupler can turn off the coupling to stabilize the solitons' intracavity positions. By adjusting the AMX to certain states, the relative angle between two solitons can be arbitrarily chosen between 11° and 180°. MPF with passband frequency from 0.5 GHz to 9 GHz can be obtained without the help of pulse shapers or other auxiliary off-chip tunable devices. The sech-shaped narrow optical pulse provides a filter response with a 3-dB bandwidth of ∼0.1 GHz. The proposed scheme provides a simple and programmable filtering solution for radar and 5G communication applications. The soliton angle controlling method can also be enlightening to other applications.
9 December 2024 in Laser & Photonics Reviews
18 March 2025 in IEEE Transactions on Instrumentation and Measurement
Measurement of the frequency response of sensors and devices with high-frequency resolution and sensitivity is of great importance for high-sensitive trace gas detection, high-quality photonic circuit fabrication, etc. Optical vector analysis (OVA) based on microwave photonics offers outstanding frequency resolution. However, the sensitivity of the incoherent detection system is usually limited. This paper proposes a self-calibrated coherent OVA system that leverages microwave photonic technology. The laser phase noise, which is the leading challenge in coherent detection, is compensated through a self-calibration process. Employing precise microwave sweeping paired with a highly stable laser, the proposed system achieves a theoretical frequency resolution at the level of Hertz. In the experiments, we demonstrate a sensitivity improvement of at least 35 dB over the incoherent system. In addition, the proposed OVA system offers superior frequency resolution and accuracy compared to commercial coherent OVA products.
19 June 2026 in Nature Communications
Beamforming technology featuring broad bandwidth, fast beam switching speed and multi-user access capability plays a pivotal role in the next-generation wireless communication systems. Here, we report a fully-connected broadband microwave photonic multi-beamforming architecture based on silicon optical true-time delay lines (OTTDLs). Unlike conventional partially-connected schemes, the fully-connected network allows each radio frequency beam to be synthesized by all antenna elements, enhancing beamforming gain and multi-beam scalability. Experimental measurements demonstrate squint-free beam steering across 13 directions with deflection angles exceeding ±50.0° and a fast beam reconfiguration speed of 60 ns. Compared with partially-connected schemes, our architecture achieves stronger received signals, delivering a 2.9 dB gain at 13.1 GHz for an identical 8-element antenna array. A 64-QAM downlink signal with 400 MHz bandwidth achieves an error vector magnitude (EVM) of 7.6% over 20-m outdoor wireless transmission. These results provide a scalable solution for broadband microwave photonic multi-beamforming and support future 5 G and 6 G wireless networks.
18 September 2024 in TechRxiv
Parity-time symmetry has great potential for mode selection in multimode resonators. However, in a PT-symmetry system with saturable absorption mechanisms, the random background noise can initiate single-mode oscillation at any of the maxima within the gain spectrum, i.e., potential PT frequencies. Such randomness impedes the acquisition of high-quality signals at desired frequencies. Here, we propose a method to obtain deterministic PT-symmetry single-mode oscillation in a filterless multimode resonator through one-shot injection. With this technique, we change the system's gain spectrum and enhance the gain discrepancy. Utilizing the frequency domain saturable absorption of the resonator, oscillation at desired mode can maintain its frequency after the withdrawal of the injection signal. To validate the concept, we established a polarization-division multiplexed dual-loop optoelectronic oscillator (OEO) with a 1-km long cavity operated under PT-symmetry conditions. By one-shot injecting the PT-OEO, we effectively eliminate the randomness arising from the relatively flat gain spectrum, facilitating oscillation at any desired potential PT frequencies from 1.8 to 9 GHz without requiring elaborate frequency tuning structures. Moreover, the one-shot injection technique produces ultra-low phase noise performance, achieving a remarkable -158.6 dBc/Hz@10 kHz. This performance level stands in close comparison with the best phase noise values recorded for OEOs.