17 April 2018 in International Journal of Automation and Computing
10 September 2020 in IEEE/ASME Transactions on Mechatronics
This paper proposes a numerical model to predict actuation frequencies (strain-cycling frequencies) for 1-D SMA actuators. The numerical model is designed by comprehensively considering the factors that significantly affect an SMA actuator's strain-cycling frequency, i.e. heat convection methods, constant or non-constant bias loads, and Joule heating methods. For computing strain cycles of SMA actuators, we develop a computation framework that effectively integrates an SMA constitutive model, a phase transformation kinetic model, stress-strain models for different types of bias stress, and a heat transfer model of SMA wires. The strain and temperature rates are formulated by nonlinear ordinary differential equations. The strain and temperature cycles can be accurately approximated by numerical iterative methods. Experimental verification was conducted to investigate the effectiveness of the proposed model. By initially identifying the SMA characteristic parameters, we employed the Latin hypercube sampling method to generate 30 sets of design parameters for comparing the predicted and measured actuation frequencies. In addition, we investigated how the uncertainty of pre-measured SMA characteristic parameters affect the numerical prediction of actuation frequency by conducting sensitivity analysis. The experiments demonstrate 0.7%~9.03% and 2.65%~17.57% differences between predicted and measured actuation frequencies for constant bias loads and spring bias loads respectively.
18 April 2024 in IEEE Transactions on Medical Robotics and Bionics
In single-incision laparoscopic surgery (SILS), magnetic anchoring and guidance system (MAGS) is a promising technique to prevent clutter in the surgical workspace and provide a larger vision field. Existing camera designs mainly rely on a rigid structure and sliding motion, which may cause stress concentration and tissue damage on curved abdominal walls. Meanwhile, the insertion procedure is also challenging. In this paper, we proposed a wireless MAGS consisting of soft material and wheel structure design. The camera can passively bend and adapt to the curved tissue surface to relieve stress concentration. The wheel structure transfers the sliding motion to rolling motion when the camera tilts and translates, avoiding tissue rupture due to dry friction and facilitating smooth motion. The experiments show the novel laparoscope has dexterous locomotion and bendability with 20∘ in bending angle and 16.4mm in displacement. The maximum stress is reduced by 64% compared with rigid designs. An easy and safe insertion procedure based on soft property is also introduced, which takes less than 2 minutes on average without the assistance of additional instruments.
1 May 2010 in Gastroenterology