Vadym Nizhnyk

Vadym Nizhnyk

Auto-generated profile, based on publicly available information

Vadym Nizhnyk

Institute of Scientific Research on Civil Protection of the National University of Civil Protection of Ukraine

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 February 2025 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
VNValeriia Nekora
Valeriia Nekora
SPSerhii Pozdieiev
Serhii Pozdieiev
ONOlga Nekora
Olga Nekora
SFSvitlana Fedchenko
Svitlana Fedchenko
VNVadym Nizhnyk
Vadym Nizhnyk
TSTaras Shnal
Taras Shnal
The object of this study is the processes of heating and destruction of glazing in translucent elements of fencing structures. The paper provides data on the computer simulation of a glass panel behavior when it is heated on one side under the conditions of exposure to the standard fire temperature regime. With the help of computer simulation of a glass panel under conditions of thermal influence, the process of heat transfer was reproduced based on the non-stationary heat conduction equation. The stress-strain state of the glass panel was considered using the finite element method. The thermal effect was combined with the mechanical load due to the excess pressure that can occur in the room where the fire originates and develops. To study the propagation of cracks in glass, the strength criterion according to the Johnson-Holmquist model was applied. As a result of computer simulation based on a mathematical model, data were obtained on the dynamics of the formation and propagation of cracks in a glass panel under conditions of heating according to the standard fire temperature regime. It is shown that the glass panel is destroyed through the formation of a system of branched cracks, which is confirmed by empirical experience. The destruction of the glass panel was associated with the onset of the limit state of loss of integrity, and its fire resistance limit was registered based on this attribute. In the work, a comparative analysis of the obtained data with the findings from experimental studies has been carried out. As a result of the comparative analysis, it is shown that the results are adequate since their relative error is on average no more than 8 %, and the F-criterion of adequacy at the significance level of 0.05 does not exceed the tabular value. Based on the results, the possibility of its application for a reliable analysis of the fire resistance of enclosing elements in building structures has been proven

31 October 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YTYuriy Tsapko
Yuriy Tsapko
IKIvan Kasianchuk
Ivan Kasianchuk
RLRuslan Likhnyovskyi
Ruslan Likhnyovskyi
АTАleksii Tsapko
Аleksii Tsapko
VKVitalii Kovalenko
Vitalii Kovalenko
MSMaryna Sukhanevych
Maryna Sukhanevych
One of the methods for ensuring the efficiency of pipelines for transporting heat-carriers during operation is their thermal insulation, which inhibits heat transfer processes and does not affect environmental indicators. Therefore, the object of research was wood, a polymer material made by polymerization of wood sawdust and dry mixtures of synthetic resins for thermal insulation of pipelines. It has been proven that in the process of thermal action on the heat insulating layer of wood polymer material, the process of heat inhibition involves the formation of pores. This is due to the fact that the thermal conductivity of the material depends on the volumetric mass, the decrease of which for a wood polymer product leads to a decrease in thermal conductivity. In this regard, the simulation of the process of heat transfer through a cylindrical heat-insulating layer made of wood of polymer material was carried out and the dependences derived, which allow obtaining a change in the dynamics of heat transfer and determining thermophysical properties. According to the experimental data and the established dependences, it was found that the thermal conductivity of the wood of the polymer material was within 2.4÷2.9·10-8 m2/s, the thermal conductivity of the sample did not exceed 0.030 W/(m∙K). In addition, the heat capacity of the product corresponds to a value of more than 1034÷1145 kJ/(kg·K) depending on the thickness, which accordingly categorizes it as a heat-insulating material. At the same time, data on thermal insulation properties for polyurethane foam show that when it is used with a density of 100 kg/m3, the thermal conductivity is 0.029 W/(m∙K), which is approximately the same as the value of the proposed wood polymer material. The practical value is the fact that the results of determining the heat-insulating properties of a wood polymer material make it possible to establish the scope and conditions of its application




28 February 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
SPSerhii Panchenko
Serhii Panchenko
ABArtem Bychenko
Artem Bychenko
VNVadym Nizhnyk
Vadym Nizhnyk
This paper reports results of an experimental study on hydrodynamic processes when water is dropped from a height, as well as their influence on the movement of liquid, in order to optimize the processes of aviation firefighting. The main parameters of water dispersion were determined based on a series of experiments. It was established that the average diameter of drops when dropped from a height of 10 meters is 2.5 mm, with a maximum spraying distance of up to 15 meters. The size distribution of the droplets showed that 30 % of the droplets have a diameter of less than 2 mm, 50 % are between 2 and 5 mm, and 20 % are more than 5 mm. During the experiments, it was measured that the time for pouring water from the container is 3 seconds, and the speed of movement of water fractions when dropped from a height of 10 meters is 9.8 m/s. With an increase in the discharge height by 5 meters, the speed of water movement increased by 20 %. One of the key points of the study is the improvement of the Torricelli equation by introducing the coefficient K (0.85), which takes into account the viscosity and density of water, which improved the accuracy of calculations by 15 % compared to the standard equation. Python was used to process and interpret the video data, along with libraries such as OpenCV for image processing, NumPy for high-performance mathematical computations, and Matplotlib for data visualization. The resulting data open up new prospects for devising aerial firefighting strategies, providing a 20 % increase in coverage area, and a 25 % reduction in firefighting time. Torricelli's equation was improved; a new procedure was devised for the experimental determination of water dispersion parameters, which has an important practical application in the field of fire safety. In the field of fire safety, the data obtained could be used to improve aviation firefighting strategies, which would allow for greater efficiency and safety Представлено результати експериментального дослідження гідродинамічних процесів при скиданні води з висоти та їх вплив на рух рідини з метою оптимізації процесів авіаційного гасіння пожеж. Основні параметри диспергування води визначалися на основі серії експериментів. Встановлено, що середній діаметр крапель при скиданні з висоти 10 метрів становить 2.5 мм, з максимальною відстанню розпилу до 15 метрів. Розподіл крапель за розмірами показав, що 30% крапель мають діаметр менше 2 мм, 50% - від 2 до 5 мм, та 20% - більше 5 мм. Під час експериментів було визначено, що час виливу води з ємності становить 3 секунди, а швидкість руху водяних фракцій при скиданні з висоти 10 метрів - 9.8 м/с. Зі збільшенням висоти скидання на 5 метрів швидкість руху води збільшувалася на 20%. Одним з ключових моментів дослідження є вдосконалення рівняння Торічеллі за допомогою введення коефіцієнта K (0.85), що враховує в'язкість та щільність води, що покращило точність розрахунків на 15% порівняно зі стандартним рівнянням. Для обробки та інтерпретації відеоданих було використано Python разом з бібліотеками, такими як OpenCV для обробки зображень, NumPy для високоефективних математичних обчислень та Matplotlib для візуалізації даних. Отримані дані відкривають нові перспективи для розробки стратегій авіаційного гасіння пожеж, забезпечуючи збільшення площі покриття на 20% та зниження часу гасіння на 25%. Вдосконалено рівняння Торічеллі та розроблено нову методику для експериментального визначення параметрів диспергування води, яка має важливе практичне застосування у сфері пожежної безпеки. У сфері пожежної безпеки отримані дані можуть бути використані для покращення стратегій авіаційного гасіння пожеж, що забезпечить більшу ефективність та безпеку