The height of the atmospheric boundary layer (ABL) exerts a significant influence on flow behavior within wind farms and directly impacts their performance. This study investigates how variations in ABL height and capping inversion layer thickness affect the efficiency and power output of a gigawatt-scale wind farm. Five advanced numerical approaches, ranging from high-fidelity large-eddy simulations (LESs) to Reynolds-averaged Navier–Stokes (RANS), are used to model farm-scale flow dynamics under shallow (∼150 m) and deep (∼500 m) ABL conditions. The results consistently show that shallow ABLs increase flow blockage and turbine wake interactions, leading to reduced power production. In contrast, deeper ABLs promote enhanced wake recovery and increased overall energy yield. These trends were observed across all solvers, demonstrating the robustness of the findings. Notably, while some quantitative differences emerged depending on modeling fidelity and computational domain size, the overarching trends remained consistent among the participating research institutions and industry partners. The simulation cases performed are complex, and the results of the different methods show a variation of up to 10 %, and further research is needed to limit this gap. Based on these results, it is not clear to what extent the variation depends on the fidelity level of the models used. The study concludes that ABL height and stability are critical parameters to consider in wind energy siting and turbine layout design to optimize performance across varying atmospheric conditions.
The height of the atmospheric boundary layer (ABL) exerts a significant influence on flow behavior within wind farms and directly impacts their performance. This study investigates how variations in ABL height and capping inversion layer thickness affect the efficiency and power output of a gigawatt-scale wind farm. Five advanced numerical approaches, ranging from high-fidelity large-eddy simulations (LES) to Reynolds-averaged Navier-Stokes (RANS), are used to model farm-scale flow dynamics under shallow (∼ 150 m) and deep (∼ 500 m) ABL conditions. The results consistently show that shallow ABLs increase flow blockage and turbine wake interactions, leading to reduced power production. In contrast, deeper ABLs promote enhanced wake recovery and increased overall energy yield. These trends were observed across all solvers, demonstrating the robustness of the findings. Notably, while some quantitative differences emerged depending on modeling fidelity and computational domain size, the overarching trends remained consistent among the participating research institutions and industry partners. The study concludes that the sensitivity to model type is limited and that ABL height and stability are critical parameters to consider in wind energy siting and turbine layout design to optimize performance across varying atmospheric conditions.
The increasing scales of modern wind energy systems, with rotor diameters exceeding 250 m and hub heights above 150 m, introduces new challenges in understanding interactions between atmospheric dynamics and wind farm performance. This study investigates the impact of atmospheric boundary layer height (BLH) as a key parameter influencing wind farm efficiency and turbine loads. Using mesoscale simulations from the Weather Research and Forecasting (WRF) model combined with lidar measurements, we quantify BLH variability and its associated uncertainty across three representative sites in the North and Baltic Seas. A series of Computational Fluid Dynamics (CFD) simulations for a wind farm, containing 100 15 MW turbines, under varying BLH and wind speed conditions reveal significant efficiency differences linked to atmospheric stratification, with lower BLH generally reducing farm efficiency. Seasonal and site-specific climatologies highlight that Baltic Sea conditions, characterized by larger extent of low BLH conditions, lead to reduced performance compared to North Sea sites. Furthermore, we assess the influence of large-scale coherent turbulence structures on turbine loads through aeroelastic simulations of both bottom-fixed and floating configurations. The results show that low-frequency fluctuations, often absent in standard design models, increase fatigue loads within wind farms, particularly for turbines in wake-affected regions. These findings underscore the need to incorporate BLH variability and large-scale turbulence effects into engineering models for reliable performance and load predictions of next-generation offshore wind farms.